Jump to content


Durak

Members
  • Content count

    1043
  • Joined

  • Last visited

Everything posted by Durak

  1. Durak

    oh Jester!!!!

    Well I am not Jester by a long shot but I have been perusing the medea board due to my new purchase as well: Periodically To insure smooth trigger action, lubricate the needle and trigger mechanism regularly. Remove the needle and coat it with a high-quality grease (like Medea Super Lube); then wipe the needle with a soft, clean cloth, leaving on a light coat of grease. Re-insert the needle into the airbrush and re-tighten the needle-chucking nut (#18). Note: DO NOT over-grease the needle packing, since it is possible to transfer the excess grease into the nozzle, causing severe paint flow problems. DO NOT use light machine oil for lubrication. This will cause the needle to stick slightly as it moves though the needle packing.
  2. Durak

    Primer and ink

    Just as another suggestion I would not seal the model right after a primer has touched it. I would apply the base coats and use the inks as the others have suggested and then apply a very light coat of testers dull coat. Be patient when painting over the dull coat because paint will sometimes come off when painting on top of it. Or you could just wait till the very end and then use dull coat but that is a matter of personal taste. Any who this is my 2 cents
  3. Durak

    Help with pumice paste!

    I don't think mixing sand is the key. It probably extend the drying time quite considerably and lose the effect of its adherence. You could buy some pumice from Michaels and mix the two effectively extend the life of both. You can always try but I don't think sand would hep you much.
  4. Durak

    cell phone services

    Don't get edge, I currently am stuck in a contract with them and they just plain stink. Every minor thing done to your phone and they are pushing another 2 year contract down your throat. Also trying to get a hold of a customer rep with them is the worst
  5. Durak

    Gods among posters

    Some ambrosia would be nice too!
  6. Durak

    Wow..

    He is obviously a reply bot of some sort
  7. Durak

    Dresden Files

    addicted on both accounts
  8. Durak

    Holding a Mini

    Medical clamps work well too if you know anyone in the profession that can get you some.
  9. Durak

    To my many friends here

    Stuart. I will pray for your safe and speedy recovery. Good luck man!
  10. Durak

    Optivisor advice

    I have a 2 and a 10 just because I like to work with minis a little farther away that Jester. Also if I may suggest, depending on your brand you may want to get a stocking hat to put your visor on. My has the habit of ripping out hairs if I don't. But it is very comforatable
  11. Durak

    Figure International

    Is this a order online type of thing or can you pick it up in Barnes and Nobles?
  12. Durak

    DO YOU ENTERTAIN EASILY?

    Sorry for the double post, strange I only clicked once.
  13. Durak

    DO YOU ENTERTAIN EASILY?

    amazon.com is another one took look at with this as well
  14. Durak

    DO YOU ENTERTAIN EASILY?

    amazon.com is another one took look at with this as well
  15. http://www.dickblick.com/zz050/02/ 60% off at dick blick for those who use them
  16. Well how about purple and a dark blue for royalty and just the dark blue for rank and file.
  17. Durak

    Blending grey

    Spring when I am using an extensive amount of Grey I take a different approach and prime that area black. I then layer about 4 or 5 grays in starting from darkest and work my way up. Ending with a dry brush of the lightest color. I have very good results with this and as has been repeated to me very often your mileage may vary.
  18. Yes my wife purchased one for me on my birthday and I absolutely love it. Much better than messing around with an ungainly flex shaft. I also love that fact that it is mobile enough to where you can really reach those hard to get to areas without binding up. Whereas if you had the shaft you are really limited to the amount of angles you can turn. just my 2 cents
  19. Durak

    Neverwinter Nights 2 releasing tomorrow

    I like the smooth polished feel of the campaign, but at the same time the linear plot is getting rather tiresome. The customization as haldir put it could use some work as well. Not enough side quests as well. But I do like the fact that you get manage a fair portion of property later. (I tried not to spoil anything)
  20. Durak

    My light tent doesn't work

    I would use vellum paper, that is about the most see through paper you can buy. Also here is the website that I got the idea to craft my own light box. http://www.dragon-miniatures.com/tips.php?page=diffusion
  21. Durak

    Overlord book???

    Isn't the Dwarf book about due as well?
  22. Durak

    Axe and Hammer Tavern (1.2)

    Aaah the smell of bacon and gunpowder in the morning, there is nothing finer
  23. Durak

    This should be my theme song

    If that hoodie ever makes it to market I am buying it...
  24. Durak

    Emiline Jamilah Pierce

    Congrats on your latest addition Kit!
  25. http://www.bernardbelanger.com/computing/NaDa/
×