Search the Community
Showing results for tags 'Edging'.
Found 1 result
Hi everyone! It's been a while since I have posted something, but here we go! I have decided to take a break from my terrans and try something new. There were several new techniques I had been wanting to try, including camouflage, washes, and edging. I also wanted more practice with OSL and jeweling now that I had purchased some Matte medium. I had been going back and forth about how I wanted to paint my ritterlich force, when I came across this wonderfully painted starship fleet over at triple zero painting: https://triplezeropainting.com/category/spaceship-miniatures/brigade-models/oness/ I was blown away by this paint scheme and had wanted to do some camo for awhile, but nothing I had seen so far in the CAV realm really stuck with me. This was my answer! I started out by airbrushing my force with Reaper Breonne Blue. I let it dry and applied the sticky tack as explained in the article, then airbrushed with Ashen Blue. Note: If you do this, you need to be very careful to make sure the sticky tack is flush against the model, or the top color will bleed underneath. I had to do a lot of cleaning up, but this is how it turned out: To get the crevasses nice and dark, I applied a wash of 1:1 navy blue/black, with some water and matte medium to thin it out. This was my first time applying a wash and I think it came out pretty well (though the photo is crap) Next came the highlighting. I don't have a photo of just this phase for the cougar, but here are some Tiamat legs which were my test piece: Highlights were achieved by mixing each blue with Reaper Misty Grey in a 1:1 ratio, with some matte medium to thin it out once again (that stuff is fantastic!) I realized almost immediately that I had made a terrible mistake in terms of time commitment... there were so many edges. However, I think the final product came out pretty darn cool. I am really proud of this one! C and C welcome! I would like to go over the jewling one more time, and if anyone has any recommendations for a good spray matte sealer I am all ears. Going forward I will be doing these in a more assembly line fashion than one at a time, but I needed a test piece first :)