IMEF Marines & "Bugs"
Posted 15 July 2012 - 09:39 PM
50175 "Torch" McHugh, IMEF Flamethrower
I started with "Torch" McHugh, as he looked like the most fun to paint off, for starters. As with most of the others in this line, I've re-based him on a War Cast Studios (http://www.warcaststudios.com) "Industrial Round 25mm" resin base, instead of the 30mm plastic base the figure came with originally. The "flame" effect is a translucent orange flame piece salvaged from a HorrorClix "Freakshow" figure ("Firebreather").
50175 & 50014 IMEF Marines
Here's Torch again, with Nick Stone, IMEF Squad Leader. The background terrain is some of my cobbled-together sci-fi scenery made from various broken toy pieces glued down on link-together "Road Champs" play set tiles (fingerboard, finger-bike, and off-road sets) for a techno look and a certain amount of modularity.
50263 & 50254 IMEF Marines
On the left is Erik Proudfoot, and on the right is Jazz Jenkins. I also have Reggie Van Zandt and Sarah Blitzer on order through my friendly local game store (http://www.amorousarmadillo.com) the Armadillo Game Shoppe -- but they aren't in yet.
I also wanted to supplement this group with some specialist types. For a convention scenario, I typically plan to accommodate 6 PCs, but I also like to give the players some options. So, I picked up #50025 ("Futuristic Weapons") primarily for the IMEF-style rifle included to aid in conversions.
77009 Werewolf (Bones) - conversion work in progress
I used some Instant Mold to get impressions from the Nick Stone model, and then Apoxie Sculpt to make armor pieces to get the IMEF look. I was able to trim down the mold sections, insert some putty, and just press the molds onto the figure, then let the putty cure in place. Once the putty hardened, I was able to remove the pieces, then glue them back onto the figure.
77009 Werewolf (AKA "Jean Paul DuChamps") - "Dog Soldier" Conversion
I used a bit more putty to give the "werewolf" some pants, and touch up the figure. The base is from an upturned HeroClix base, with a warped hatch piece salvaged from a broken (heat-warped) Tau APC model.
I originally picked up this model with the intent of trying a conversion into a German werewolf for a "Weird War II" scenario (Savage Worlds), inspired by one of the Weird Wars book covers, but realized he's just TOO BIG to fit in gear scaled for a normal human. Since I was fixing up some IMEF troopers at the time, I thought I'd try this conversion, and bill this guy as some sort of bio-engineered genetic-hybrid trooper. (And since he's not a real werewolf, and hence not a shapeshifter, I can justify giving him customized gear that'll fit him just fine. :D )
On the other side, I've been pondering what sort of nasties the IMEF might be up against....
14059 Darkspawn Spawn
I think this was originally meant to be some sort of fantasy monster, but the "exoskeletal" look and the wedge-shaped head make me think of something more sci-fi/alien (Tyranid-ish) than mythic. I haven't settled on just what to do with it yet, but I thought it might be either some sort of alien shapeshifter, or perhaps a manifestation of some sort of nanotechnology (the body still knitting together as depicted by this miniature).
- Froggy the Great, buglips*the*goblin, badocter and 4 others like this
Posted 19 July 2012 - 10:18 PM
Reaper P-65 #65089 (Reggie Van Zandt, Intergalactic Marine) & Chronoscope #50274 (Sarah Blitzer, IMEF Sniper)
For Reggie, after some consideration (and concerns about the P-65 metal compared to regular Reaper miniatures), I decided to go with the slightly-cheaper P-65 version (with lead-based pewter). As far as I'm concerned, any differences in the handling of the metal are negligible; I have no plans to go throwing this figure against any hard surfaces, so I hope the "softer" metal will suffice. So far, it seems to be holding up just fine.
For Sarah, the original mini was conspicuously under-armored in the chest area. At first, I had wondered whether "Sarah" was just a generic sci-fi miniature who'd been lumped in with the IMEF just for naming purposes, but upon actually getting the figure and painting it, I could see that there were certain design cues in the gun body, the armored knee guards, and in the goggles and headgear that seemed to fit with the rest of the IMEF troopers. Still, the lack of that breastplate and the IMEF insignia was unfortunate in my opinion.
I had planned on using Instant Mold and Apoxie Sculpt to "cut-and-paste" the breastplate piece from the Nick Stone model, but while that worked for my Jean Paul DuChamps/Werewolf conversion, it really didn't work here: Simply put, her shoulders are narrower, and the proportions are off. So, I just had to wing it with the Apoxie Sculpt. Alas, it shows, especially when you can see a side-by-side comparison of Reggie and Sarah, but I think it still gets the idea across (and I still prefer the figure this way to the unarmored original).
Both figures here have been re-based on War Cast Studios 25mm industrial round bases (http://www.warcaststudios.com) as with most of the other IMEF troopers.
Now I just have to put some serious work into giving these guys a derelict spaceship to roam around and hunt "bug aliens" in.
- Froggy the Great, buglips*the*goblin, badocter and 2 others like this
Posted 20 July 2012 - 01:45 PM
Posted 23 July 2012 - 01:09 PM
- Girot likes this
firstname.lastname@example.org This post is 100% organic. No Artifical Spellcheck or Grammar Check was used in the manufacturing of this post. No Zombies were harmed in the making of this post.
Posted 12 October 2012 - 09:15 AM
Reaper Chronoscope #50097 Cyber-Reavers (initial batch)
This has got to be one of the easiest paint jobs I could hope for. To get a "burnished metal" look, all I had to do was to apply some slightly watered-down black acrylic paint to the BARE METAL, then wipe off the high points before the paint had time to start drying and developing a "skin." (If it starts to dry, there's a high chance of more paint pulling away than intended.) As a result, the low points retain the black paint, for shadowing, and even a little bit of black paint remains in small "pores" in the metal, giving it a slightly burnished look. Details such as glowing dot eyes can be added later (first with a dot of white, then going back with a dot of red, then doing a bit of clean-up with black and a fine brush for any "splash.")
This was so easy, I couldn't help but go for a few more.
Reaper Chronoscope #50097 Cyber-Reavers (4 sets)
Once I replenished my stock of War Cast Studios "industrial" 25mm resin bases at my Friendly Local Game Store (and picked up some of the new "industrial tech" bases -- http://www.warcastst...l&product_id=67), I went ahead and based and painted the rest of my Cyber-Reavers.
In the sci-fi scenario I've been building up around the IMEF troopers, this "endoskeleton" design is a common one, put out by a number of manufacturers, so I wanted some variety in how the 'bots look. I have a few old Ral Partha "Necrovores" and some Heartbreaker Hobbies Warzone "Machinators" that I might polish up a bit to represent other design variants as well. But for these particular models, I hinted at some variations by painting some of the robots with a shiny white carapace, versus the "burnished pewter" look going on with most of the rest. (But of course, the "burnished pewter" look is just so quick and easy that I couldn't resist using it for the clear majority.)
I experimented with the arm sprue that comes with the blister pack, and rather than going with the conventional "one robot, one gun" lineup, I paired a few "empty-hand" arms together so three of my Cyber-Reavers are unarmed (though this means that it's offset by three Cyber-Reavers who are going all "John Woo" with paired pistols as a consequence).
Further slight variation is fairly easy, considering how thin-limbed these figures are, as stance can be easily adjusted by slightly widening or narrowing the space between the feet, and the amount of bend at elbows and knees can be slightly adjusted without noticeable warping, with a bit of care.
One tricky thing about basing these figures is that the "skelebots" are extremely thin-limbed (not surprising - they're skeletons!) and while this has advantages when I want to do some slight pose variants, this presents a challenge when trying to pin them down to bases unless I don't mind them all having wobbly-looking shins. Normally this process would involve taking a hobby pinning drill and boring a hole in the heel of one or both feet, then inserting wire, and matching it to holes bored into the resin base. The shin area on these figures is exceptionally thin and warps very easy with very little pressure (it's pewter - soft metal), and the bottom surface area of the feet is so small that, combined, it makes for a bit of an ordeal to try to drill those holes.
Thus, after my first batch of Reavers (at top), I tried another method: The figures normally come on tabs that are meant to be fitted into the slotted plastic 30mm bases they originally came with. Rather than cutting off the tabs entirely for re-basing, I used metal snips to trim away all of the tabs EXCEPT for the areas directly attached to the bottoms of the feet. I then tapered those sections of pewter into triangle/wedge shapes, so I'd have some built-in anchors. I used the conical head on my Dremel to bore some anchor holes into the surface of the resin base under each foot, then inserted the wedge anchor points, and filled any remaining gaps with tiny amounts of epoxy putty. Once the putty hardened, the figure usually popped right back out again, but this was easily fixed with a dot of super glue.
Future Steps: Battle-Damaged "Synth-Skin" Reavers:
I still need to make some "battle-damaged" bots with "synth-skin" remnants, but for that I am going to have to chop up some other figures and use a bit of Instant Mold and Apoxie Sculpt. My basic plan: Take a cheap plastic HorrorClix figure that I didn't like the face of anyway, chop off part of the head, then use Instant Mold to make a partial copy of a Reaver skull, and insert that. Voila! Battle-damage with a part of the "synth-skin" torn away to reveal cyber-skull underneath. I'm also toying with the idea of doing something with some of the "heroic dollies" -- another idea inspired by my miniatures-kitbashing hero, Froggy the Great. ;)
"Battle damage" on limbs is going to be a bit trickier, since I'd need some meatier limbs to have much ROOM to expose cyber-circuitry underneath that will paint up well with my limited skills. This may require a bit of trial and error. Of course, this could be a great excuse to get #50201 Cyborg Parts, but price-wise, it would be more cost-effective for me to just do the "unthinkable" and chop up some perfectly good complete Cyber-Reavers. (I might just go back and do that at some point; it's not like I put very much effort into the paint job on the "burnished pewter" ones.)
Just in case anybody asks, the scenery in the background of the bottom picture consists of some old plastic cassette tape organizer trays used for room walls, some foam and some plastic cross-stitch grid for the floor "grill," some parts from a broken Micro Machines Star Wars play set for the control panel in the foreground, and then a couple of resin Grendel scenery sets (Cargo Bay set cargo door, and "stasis pods" from the Med Bay set).
- buglips*the*goblin, badocter, Patrik Ström and 2 others like this
Posted 12 October 2012 - 10:21 AM
If you're looking for a scenario skirmish scifi thing, might want to look into Sedition Wars. That's where my IMEF and NOVA are headed.
I've got a "We've Got Movement!" lined up, along with the scenery kit and one each of the limited edition character add-ons, so, yeah, I'll be doing something with Sedition Wars eventually. :) However, I've got a request from one of my most regular attendees to my RPG sessions that I run a sci-fi/cyberpunk campaign (after I finish up my zombie-apocalypse campaign), so I've been slowly working my way toward getting some minis painted up for such a campaign. I'll also be painting up all my Sedition Wars figures, but I fear that having the Strain as my big-bad would be seen as AWFULLY close in theme to another zombie-apocalypse campaign.
Plus, another motivator was that I was trying to stick to Reaper minis because at the time I started this, my Friendly Local Game Store was providing table space, and I was encouraged to use minis currently provided through that store, so my game would serve as a "demo" of sorts. The FLGS has changed its policies, however, as I guess hosting table space for weekly RPGs wasn't a money-maker, and I'm having to move things back to my house ... so I guess that's no longer a constraint at this point.
I've got some AT-43 Therians, some Warzone Mechinators, some Ral Partha Necrovores, some Mongoose Starship Troopers bugs, etc., that I can press into service as opponents for my IMEF, once I come up with Savage Worlds RPG stats for them -- since it no longer matters that these aren't in print or carried by my FLGS if they're no longer providing me with free table space -- but I still have quite a few Reaper minis to paint up that might be put to good use here, too.
- CashWiley likes this
Posted 12 October 2012 - 10:52 AM
FWIW, the publishers of Song of Blades and Heroes has put out Mutants and Death Ray Guns, a post-apocalyptic sf game system that uses any sf miniature. $8 PDF.
Posted 12 October 2012 - 05:01 PM
Could you write up the steps you took to paint the IMEF's?
Er, well, it's not like I have a really serious scheme here.
1) Base-coat white.
2) Mix "flesh tone" paints and water down to paint any exposed skin.
3) Mix roughly equal portions of mid-tone grey, black, and light blue, and water that down slightly, to paint the armor and cloth portions of the figure. (Sarah Blitzer was a bit different, in that I painted "body suit" portions a dark blue.)
4) Use mid-tone grey to paint splotches on armor and cloth areas for "urban" camouflage.
5) Paint armor straps black. Use slightly watered-down black to paint shadow-lines under armor, and meandering lines as part of the camouflage scheme.
6) Go back and paint highlights on armor edges in a slightly darkened mid-tone grey.
7) Apply small areas of white paint to spots where I'll be going back with bright color details, such as the glowing-blue portions of Reggie Van Zandt's heavy gun, or the green visors of Jazz Jenkins and Erik Proudfoot, the red sensors on assorted headsets, etc. After that dries, go in with touches of color.
8) Miscellaneous detail work, interspersed with clean-up as needed (as I inevitably blotch a bit too much paint here or there in the process of painting).
A lot of it is basically just a case of me making it up as I go. It's not like I'm *serious* about any of this. :D
- Last Knight and ced1106 like this
Posted 12 October 2012 - 05:55 PM
Another alternative is to see if you can find the original WH40K Rogue Trader rules; back then it was a skirmish game with WYSIWYG rules!
Me in Reaper's Inspiration Gallery
Posted 12 October 2012 - 07:43 PM
Anything I paint that turns out better than tabletop is purely by accident!
Visit the Dirty 30s! - A sourcebook for Pulp RPGs... now with 10% More PULP!
Gargoyles Landing BBS - it's all about the games (and it's free!)
Hirst Molds: 40, 45, 54, 55, 56, 60, 63, 70, 71, 72, 73, 74, 75, 76, 80, 84, 85, 86, 201, 203, 205, 235, 250, 260, 281, 282, 320, 321
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users