Jump to content

Sign in to follow this  
catdancer

Warhammer 40k...Commission Work for Christmas...

Recommended Posts

post-11942-0-46496700-1383607215.jpgpost-11942-0-05081000-1383607166.jpgpost-11942-0-49164200-1383607129.jpgpost-11942-0-68536300-1383607084.jpgpost-11942-0-42137900-1383607050.jpgpost-11942-0-96631200-1383607018.jpgpost-11942-0-51253700-1383606977.jpgpost-11942-0-02067400-1383606936.jpgpost-11942-0-38368900-1383606902.jpgpost-11942-0-49251000-1383606865.jpgpost-11942-0-60012900-1383606833.jpgpost-11942-0-06210400-1383606796.jpgpost-11942-0-59095200-1383606760.jpgpost-11942-0-89309400-1383606718.jpgpost-11942-0-40142600-1383606673.jpgpost-11942-0-52194800-1383606628.jpgpost-11942-0-78635200-1383606591.jpgpost-11942-0-57261500-1383606555.jpgpost-11942-0-12809500-1383606524.jpgpost-11942-0-07760200-1383606494.jpgpost-11942-0-10107600-1383606462.jpg

 

COMMISSION WORK FOR CHRISTMAS 2013 (WARHAMMER 40K)...

 

I finally finished a major part of a sci-fi commission order that I have to complete by Nov. 21, 2013...left to complete are (2) Nightwing Chaos Space Marine figures out of a unit of (15 figures)...as some of you members know (I hate doing Warhammer 40k related work/figures...but the price was something that I could not pass up)...The buyer requested that all pieces be finished/sealed in a protective high gloss finish......Posted are;

 

PHOTOS 1-3...Inquisitor in red robe...

PHOTOS 4-6...Terminator Marine captain...

PHOTOS 7-9...Inquisitor in purple robe...

PHOTOS 10-11...Nightwing Chaos Marine with standard,,,

PHOTOS 12-14...Harlequin warrior...

PHOTOS 15-16...Imperial Assassin...

PHOTOS 17-18...Communications assembly (scratch built)...

PHOTOS 19-21...Field Power assembly (scratch built)...

 

I hope you sci-fi members like these selected figures.

 

Catdancer...

  • Like 7

Share this post


Link to post
Share on other sites

Whoa...nice work there. I really like how you did the Eldar Harlequin. The scratch built comms array and field power station are really nice, too. Very interesting use of parts.

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Dan d'Lyon
      Can't believe I missed this one until now.  I didn't have a printer during their previous projects, but I'm definitely in on this one.  Less than 48 hours to go.  Link added.
       
      https://www.kickstarter.com/projects/2nddynasty/starship-iii-fully-3d-printable-28mm-spaceships?ref=user_menu
       
      Seek adventure amongst the stars! Explore strange new worlds, smuggle illicit cargos across the hyperspace lanes or launch a space to ground assault, in your Scout Ship, Transport, or Space Shuttle!
      Somewhere in the outer reaches... Starship III introduces three original, fully 3D-printable spaceships scaled for 28mm play in your favourite Tabletop RPGs or Wargames. Complete with OpenLOCK-compatible modular interiors, the ships are detailed inside and out and a variety of configurations can be used to customise the deck plans.
      Each ship comes detailed inside and out (Scout ship standard interior shown here) As the campaign unfolds, new starship hull variants and modules will be unlocked as stretch goals to bring even more variety to your game and increase the pledge value for everyone.
      Each pledge is designed to be printed on your own 3D printer or via a print service, allowing you to print as many parts as you like, for non-commercial use. Deliverable files will be made available digitally in STL zip packs via DriveThruRPG.com (see Printing Requirements details below for print bed size requirements)
      Hangar 01: Space Shuttle Alpha Need a way to get your units from the ground to orbit? This space shuttle is fully modular and can be configured as a dropship, cargo shuttle, or even a small starship. The stock standard aerodynamic fuselage comes complete with manoeuvring thrusters, sensors, landing gear and articulated main thrusters for VTOL operations.
      The standard layout below is included in any pledges that include the shuttle Modular standard deck plan of shuttle interior. Hangar 02: Scout Ship Beta Explore deep space and final frontiers with this full 28mm scale scout ship, designed stock-standard for long haul endurance scout missions. Includes two manned turrets for defending in rough territory, a full sensor suite package for scanning new systems, a well equipped engineering section, cargo hold, living quarters and a 5-station forward bridge.
      These are the unique parts that compose the scout ship interior, which come as a part of any scout ship pledge Closeup of the Engineering Standard Deck Plan for the Scout Ship Beta Hangar 03: Transport Delta Cruise the hyperspace lanes in this high-speed transport. Haul cargo - legal or illicit - with two massive engines to get you from point A to point B. Manoeuvre with the fluidity of repulsor technology and defend yourself with manned or unmanned turrets and a powerful shield generator.
         
    • By Jasper_the_2nd
      Just noticed this KS was posted here. Only 53 hours left....

      https://www.kickstarter.com/projects/wowbuildings/wowbuildings-further-space-adventures-3d-print-stl/description
       
      Here we are folks, WOWBuildings is expanding further into space, with the infrastructure now for several types of scenarios, this KS will be a mix of vehicles and Buildings so you will have an even bigger range of choices for your tabletops. all will come in STL format and cuts will be made where needed so boot up those 3D printers once again and jump on board for what hopefully will be a great sack full of goodies to enjoy.
      I am adding a couple of special adds that are for personal print use only as a little treat for you top end backers, all files will be initially 28mm scaled (but slightly over scaled to allow for GW sized figures) and optimized for 15-32mm scales so hopefully something for all.
      Again human based faction designs for this KS with other races in the pipeline if all goes well, so hello again and as usual keep the feedback coming and if you want anything specific added then just ask, if it can be done it will be so
      Stretch Goals as you see will start at £1000, and £500, but this time i am toying with adding some £250 jump points too here and there to add to the fun.
      I have tried to keep the pledge level prices as low as i can as well including the licence which is an absolute bargain price for this KS as a thank you for continued support and to help with those after Xmas blues.
      £10 Road Builder
      £30 Asteroid Miner
      £40 Planet Settler
    • By Lidless Eye
      Last on today's finished works, a selection of the Gellerpox Infected from the new 40k Kill Team boxed set, "Rogue Trader"



      The faction leader, Vulgrar Thricecursed.



      The Nightmare Hulk that makes me think GW is just teasing us about Mordheim at this point:




      Gnasher-Screamer, who would also make a great Hag.  She's got a built-in coven!



      The Gellerpox Mutants:


       


       

       


      The wee ones, the Glitchlings:




       

       
       



    • By CAVBOSS
      WE ARE LIVE... https://www.kickstarter.com/projects/272456130/talon-games-cav-strike-ops-iii

    • By aku-chan
      Presenting Ensign Roxy "Hotshot" Malone, the colour scheme test Voidsman for my Starstriders set.
       
      I think she came out pretty well, and the group should look rather striking, when I eventually get the rest painted.
       
      As always, any comments or criticisms are warmly received.
  • Who's Online   16 Members, 0 Anonymous, 111 Guests (See full list)

×