Dilvish the Deliverer

New England Paint Day

2053 posts in this topic

15th is youngest b-day.  22nd is Drinking and Dragons.  Other than that I should be good.

Share this post


Link to post
Share on other sites

Posted (edited)

I expect to be busy the weekend of the 22-23rd, and on the 30th.

 

Aside from that, I am probably actually available this month.

 

Update:

Looking over the past few responses: July 15th or 16th anyone?

Edited by klarg1

Share this post


Link to post
Share on other sites

Bumping to check, now that we are less than a week away from the proposed dates.

 

If they don't work, I could try to find time at the end of the month.

Share this post


Link to post
Share on other sites

Looks like I'll be building/painting a chicken coop instead of miniatures for the next few weekends... 

Share this post


Link to post
Share on other sites

 

 Well, this month doesn't seem to have worked out.

 

 How about August?

 

 

Share this post


Link to post
Share on other sites

I might be available on August 5th/6th. Aside from that, the month looks dubious for me.

Share this post


Link to post
Share on other sites

The 5th is my Dad's 70th birthday, so I'm booked that day.  The 19th is Middle Daughter's 15 birthday.  So that is right out (though there has been rumblings of her wanting a board game party, but I think that will just be with her friends). 

 

Sometime on Laborday Weekend (Sept 2-4th) I may finally get around to throwing my beer and boardgames BBQ.  Depends on if my contract gets renewed next month (by the 15th) and I still have a job.

4 people like this

Share this post


Link to post
Share on other sites
7 hours ago, Dilvish the Deliverer said:

The 5th is my Dad's 70th birthday, so I'm booked that day.  The 19th is Middle Daughter's 15 birthday.  So that is right out (though there has been rumblings of her wanting a board game party, but I think that will just be with her friends). 

 

Sometime on Laborday Weekend (Sept 2-4th) I may finally get around to throwing my beer and boardgames BBQ.  Depends on if my contract gets renewed next month (by the 15th) and I still have a job.

Party at the squids!!!!

3 people like this

Share this post


Link to post
Share on other sites

Labor Day weekend is good for me for a paint day, but only 50/50 for a bbq.

 

I'll check with Lady Klarg, and refine that. (I'm free that weekend, but she'll be preparing for the fall semester. On the one hand, she might like me out of her hair. On the other, she might not like me running off to party without her. :upside: )

2 people like this

Share this post


Link to post
Share on other sites

 

 So, September, anyone?

 

 

Share this post


Link to post
Share on other sites

September 24th is the only day I might be available...busy month at home and at school. 

Share this post


Link to post
Share on other sites

 

 Well, September's half over... We doing one this month or should we start procrastinating on October?

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Mehman
      Right then, here's another question about the Reaper paint line. The last question was two months ago but I still feel like I'm bugging everyone. Anyway, I've decided to finally take the plunge and do some serious paint ordering for my solo game miniatures. Before I order at the end of the month (to get that Diva model for nothing), there seems to be a hiccup: there are a few different black paints in the line.
       
      I'm looking for a black to basecoat... black, funnily enough. There's Pure Black, Dragon Black, Noir Black, Nightmare Black, etc. Which of these (and the others not listed) would be closest to Citadel's Abaddon Black? Some of the blacks have a blue hue, brown hue, or whatever for different looks, but it's hard to tell from the sample mockups which ones have those hues and which don't. If anyone could break those down for me, I'd be grateful.
    • By Chrom.xh
      Hello every body, this will be here not to show off anything amazing or impressive. Just something that took me five and a half hours to do. Nothing to impressive or anything like that. Its a fairly simple paint job for this old miniature. It has been sitting on my portable painting desk for many years now, and I felt like it was time to finally paint it. So I could use it in Dungeons and Dragons if I ever played a Dwarf again or just to use in anything with Dwarves in it really. With the new system of being able to upload photos straight to here from a device, it may be a little weird. I have never used the new Reaper system for photos so lets see how it works. I will still be explaining everything to the best of my ability. All of the paints i used besides one were all Reaper Paints. So, lets get started.
       

       



       
      Okay, so these four photos are of the Dwarf miniature as a whole. I had to paint over the entire mini with black because it had taken some damage to the prime that covers it. After i had painted the entire thing I let it dry and took the pictures so I wouldn't forget to take them.
       



       
      Next I painted on the metallic colors that i knew i was going to do and I could see. This included the small amount of Chain mail showing under his massive beard, the large Warhammer and his shiled. These were done first in Shadowed Steel. Then I did the few detail pieces that I wanted in Antique Gold. After I painted those few things I realized that I hadn't painted the Rune Stone he is standing on. So I quickly mixed up a wash of the color... well Stone. I forget who the Stone wash is made by but I added some water and I think Glaze Medium. Chaoshead will yell at me in the comments to tell me i'm wrong since i was using most of his paints. Anyways, I did a couple of coats of the Stone wash and moved on to let that dry for a while.
       


       
      While I was letting the Stone wash dry I went on to other colors. I pulled the Rainy Grey out to do the fur that lines the inside of his cape, not realizing I had missed some it will show up later. This step was fairly easy when I was painting it on, but then again the entire thing to me seemed easy and I don't really know why.
       



       
      After the inside of the cape i moved on wards and started to paint Leather. I used Ruddy Leather for anything leather on the Miniature. I started with the gloves then moved on afterwards.
       





       
      Alright, in these few photos I painted more leather onto his sleeves, belt pouch, boots and the bottom of his Chain mail shirt. This step frustrated me because I accidentally painted over some of the metal, so I had to go back and paint the metallics again. I then moved on to some detail work that may have taken the most time to do... I think.
       
       




       
      On the Rune Stone, I used Breonne Blue to add some color to the... Stone. XD I wanted to paint the runes from the beginning of this small project. I think the Breonne was a good choice for the runes in the first place.
       


       
      Here I had finally painted his massive beard. I used Mahogany Brown for his beard since it was the only one within my small amount of paints that would work. I liked my choice of color for his beard though.
       



       
      In these three i painted the trim of the cape with the Ruddy Leather. I painted it very carefully to make sure I didn't get any on anything else. I already had to repaint Metallic colors earlier and i didn't want to do it again.
       

       
      Continuing with the cape i painted it Leaf Green and had to do it a couple of times to make sure it was one solid color.
       

       
      Painted the face with Tanned Skin and then used Grass Green to paint his eyes. Again this is all just a super simple paint job for this mini and is just meant to be a good, fun, little thing I like to do.
       

       
      As a final thing to finish this Miniature off was a nice little touch that I thought of last second. I painted the small heart on his cape with Blood Red. 
       






       
      The Dwarf is done! He is done in all of the simplest ways to paint that I know how. XD If you all enjoyed and have some tips or anything to leave for myself. Please leave a comment and i guess stay tuned to here or another one I post in the future.
    • By Sophie was taken
      Hello everyone!
       
      So I had to move cross-country about 2 1/2 years ago and had to box up all my hobby stuff. But now, circumstances require I get back into things (and I still have all those unpainted Bones IIs). So I managed to track down all my supplies and paints, but some settling may have occurred in transit - nearly all of my paints had fallen over from their upright positions and sat that way for the entire time. 
       
      I have almost 40 bottles; most have been opened and used at least once, but none leaked at least. When turned upright the paints didn't immediately run down to the bottom, but they still slosh around when shaken. I haven't tried using them yet. 
       
      Would they still be good, or should I take the loss, or is there a way to save them? Most are basic colors but a few were special promos that aren't being made again, and it would be a shame to lose those ☹️
       
      Edit: I should clarify these are all Reaper paints.
    • By Dosani
      Hi, i saw on amazon a paint mixer/stirrer that its similar to the ones for drinks or coffe, only this one is for hobbist paint, its brand is badger.  I custom made one that its really similar to this one and actually fits inside reaper bottles.
       
      I just used it on some reaper and vallejo paints that i have for a while, some of them especially the vallejo ones were kind of gummy with pigment on the bottom, i used my custom stirrer  and solved the issue! .  Thing is, it works very well, but on reaper i feel as if it makes the paint less dense, and in some colours like pale saffron and lemon yellow this is more evident, is covers well but feels a little similar to watercolor in its consistency . Maybe its because the stirrer is quite potent and spins very fast, so wanted to ask help to anyone that have experience using a stirrer for mixing paint and also ask Anne Foerster or some people that actually work with the composition of paint, if any of you are seen this, please help ! ;) will really appreciate it.
       
      If i use this product can i harm the reaper paints that i have? Also  on the other hand mixing the paint like this can have any positive effect as well? 
       
      Thanks for all the help, i always count on this forum when i need some important facts or tips ;)
    • By CrazyK
      Have to have a laugh in both humor and happiness after finally pulling my finger out and making a paint shaker out of a old jigsaw and a clamp.   Did it mainly to give my Reaper Paints a good shake.   But at work had a realization that I can use it to shake all the old pro paints I have squirrelled away in the hope I could do something to get the old paints back again.   The jigsaw shaker has resurrected paints I thought had long died.  Am SO freaking happy.   Some paints had settled so much they were just pigment and liquid.  Heh all fixed up now.  WOOT!
       
      Only downside is that it is a bit loud.  Am sure my neighbors must think I am doing a hell of alot DIY atm LOL
       
      Anyhoo that is all.  Had to share.  
  • Who's Online   29 Members, 2 Anonymous, 0 Guests (See full list)