Jump to content
ahayford

Raging Heroes: Dark Elves and Sisters

Recommended Posts

I got another shipping wave. Everything except my knights and knight command arrived. Overall everything looks good. I took out the Dark elf incubi and flesh eaters to do first, along with the dark elf sorceress. Everything else is sisters.

 

So... The sorceress is gorgeous. No mold release issues, no miscast, no bubbles. She was fairly easy to put together.

 

The Incubi and Flesh eaters. They did not seem to have a shiny coat like the freebies did. The Incubi were a little shiny. I removed them all off their sprues and cleaned up the pieces. They came off the sprue easy and I did not snap any pieces off unintentionally. I separated each in so a tackle box square. The Flesh eaters came one to a sprue. The Incubi did for 5 or 6 of the models, and the others came on a sprue that had like 4 torsos and another that had 4 arms and 4 heads...

 

I only assembled two of the Incubi so far. They look really nice, and don't look much smaller than my other RH minis or Reaper. The weird thing is I saw someone post on Dakka a comparison with an Incubi and a space marine and they where the same height... the incubi looked much thinner and out of scale next to it... I put mine next to a space marine and it was a head taller and the scale looked much closer. I am not sure what that means... its pretty strange.

 

The problem I am having is my glue does not want to bond with the resin. The incubi have 2 part greatswords and its a pain in the elf holding them together to set. I clocked on at 23 minutes for just that part... Seriously painful. But once done, looks really nice.

 

So, I am happy with my order. And, if anyone can recommend something better than super glue I would appreciate it.  

Edited by Smokestack
  • Like 2

Share this post


Link to post
Share on other sites

Glue is a real problem for me, too. I have three different glues and each one works with some of the miniatures and fails completely with others. It's trial and error. I glued the angels together with one that really bonded quickly and tried the same with the Manticore - no bonding whatsoever.

  • Like 4

Share this post


Link to post
Share on other sites
Quote

Even if they don't want to cast in metal I don't think they can avoid doing it. That would anger another portion of their backers. Even some of their resin only backers might see it as a broken promise or another slight against their supporters. They need to hold on to all the goodwill that they have left.

 

I'm very glad that I went in light, ordered everything I could in metal, and my resin figures look like they will be some of the last ones cast. Still a little concerned about possible connection points on the angels wings. Some people have said that a few figures have vents in hard places to fix, like covering the side of a face, including an ear. Sounds way beyond my skill level. 

 

Could you go into a little more detail about the angel wings? I'm still waiting for my angels to arrive because of the horses...... I'd appreciate knowing what kind of issues to expect when they arrive.

Edited by Balgin Stondraeg

Share this post


Link to post
Share on other sites
1 hour ago, Balgin Stondraeg said:

 

Could you go into a little more detail about the angel wings? I'm still waiting for my angels to arrive because of the horses...... I'd appreciate knowing what kind of issues to expect when they arrive.

 

We're both in the same boat about the angels. I haven't gotten any minis yet. Just feeling a bit antsy about them. I've read that some people are getting them but I haven't seen any pictures of the sprues. They could well be perfect. Raging Heroes posted pictures of many production sprues a few months ago, just not the angels. They haven't posted much other than a few painted minis and 3D prints in the last couple updates. I'd just like to stumble upon a review video or some pictures of the production angel sprues. 

Share this post


Link to post
Share on other sites
7 hours ago, Bathory said:

I don't know if it's intentional but these updates really seem to have a tone of "if you don't like the product you are dumb" 

they have so many positive comments, but in person and in emails, we just see the negative comments online and they have done what they can to fix it and all the resin is the same type so...

i am so turned off of this company at this point. The fact they act like having release agent that can't be removed is normal is crazy... they gave everyone instructions... what's the problem? 

Uh it's a sub-par product and you are an established company that should know how to make resin.... 

I am with you Bathory, for a company that sells expensive miniatures, one would think they care about the quality of their product and realize they are losing potential recurring customers.

 

The initial retail purchase I had of their orc was amazing. Simple to clean, crisp details, and no vents on important features. The freebies and the sisters that arrived in my first wave are lingering in a box and stored in a plastic container to be forgotten about until I clean that container out. -__-

  • Like 3

Share this post


Link to post
Share on other sites
26 minutes ago, pcktlnt said:

I am with you Bathory, for a company that sells expensive miniatures, one would think they care about the quality of their product and realize they are losing potential recurring customers.

 

The initial retail purchase I had of their orc was amazing. Simple to clean, crisp details, and no vents on important features. The freebies and the sisters that arrived in my first wave are lingering in a box and stored in a plastic container to be forgotten about until I clean that container out. -__-

I don't get this read at all.  I hear a company suffering from hard times and trying to keep people happy.  I also see someone with a vision that bit off more than they could chew.

 

As for release agents, it's one of the things I dislike about resin (to be honest, I don't know what anyone sees in the stuff)  I know of at least 2 companies that have had release agent issues (Impact comes leaping to mind) and the solutions are usually given and forgotten.

 

I don't particularly defend them but I understand their issues and problems and I'm willing to cut them a little slack.  And their prices are no worse than other resin miniatures I've seen.

 

My thoughts, take them as you will 

 

Roo

  • Like 2

Share this post


Link to post
Share on other sites

I took a pass on the KS but decided to drop by and see how things were going. There were a few I was interested in picking up at retail, but looking over the last three pages it seems they are having some production issues? 

Share this post


Link to post
Share on other sites

Concerning the Angels: I received the fantasy command group in my second shipment. The wings were no problem (though I'm a bit afraid of painting and using those miniatures because I fear some of the parts might come off), but some vents were indeed in difficult places. But I could put them together with only minor headaches (something I cannot say for the Stingrays and some of the freebies).

  • Like 1

Share this post


Link to post
Share on other sites
12 hours ago, CorallineAlgae said:

Even if they don't want to cast in metal I don't think they can avoid doing it. That would anger another portion of their backers. Even some of their resin only backers might see it as a broken promise or another slight against their supporters. They need to hold on to all the goodwill that they have left.

 

I'm very glad that I went in light, ordered everything I could in metal, and my resin figures look like they will be some of the last ones cast. Still a little concerned about possible connection points on the angels wings. Some people have said that a few figures have vents in hard places to fix, like covering the side of a face, including an ear. Sounds way beyond my skill level. 

 

I honestly don't think they care all that much, they've been pretty dismissive of any problems people have had with this Kickstarter.

 

I can just see them pushing the whole 'It's going to be ages before we start working on the metal heroines, but you could switch to resin versions and get them now.' angle for the next few updates, and then say that there's now not enough demand to justify a metal production run.

 

I'm just glad I ended up having to be financially responsible on this one, otherwise I'd have a ton of this stuff coming including one of those giant Harpy birdbath things.

Share this post


Link to post
Share on other sites
11 hours ago, Knight of the Dinner Table said:

Concerning the Angels: I received the fantasy command group in my second shipment. The wings were no problem (though I'm a bit afraid of painting and using those miniatures because I fear some of the parts might come off), but some vents were indeed in difficult places. But I could put them together with only minor headaches (something I cannot say for the Stingrays and some of the freebies).

 

Thank you for letting us know about the angels. I was planing on painting up the fantasy angel command group & Erzebel on a large oval base for display in a cabinet. It sounds like they might work out okay for that. Were there vents in places that might make them unsuitable as nice display pieces? Unfortunately, there's no way that I could resculpt fine details. That's beyond my skill. I leave sculpting up to the sculptors. I'm still working on mastering glue. lol

Share this post


Link to post
Share on other sites
14 hours ago, aku-chan said:

-clip-

I can just see them pushing the whole 'It's going to be ages before we start working on the metal heroines, but you could switch to resin versions and get them now.' angle for the next few updates, and then say that there's now not enough demand to justify a metal production run.

-clip-

 

They will make them, they can offer the extras for sale in their shop. This isn't just for KS backers you know. I have some of their metal minis, they are awesome and its one of the reasons I backed this.

Share this post


Link to post
Share on other sites
11 hours ago, Leader of the Rats said:

 

They will make them, they can offer the extras for sale in their shop. This isn't just for KS backers you know. I have some of their metal minis, they are awesome and its one of the reasons I backed this.

 

It's just my pessimistic take on what they say in the latest update.

Share this post


Link to post
Share on other sites

I've decided I can't really post in this thread lately, I'm just to upset about the whole thing and it gets far nastier than I care to post. I've deleted at least 5 drafts over the last couple weeks.

  • Like 4

Share this post


Link to post
Share on other sites

they aren't any later than any number of other kickstarters out there.  some of their resin issues are a pain, but I seem to remember there was a great hue and cry when they said there might be problems and wanted to draw back and retry, so they went with what they had and now they are getting crap for it.

 

Since then the miniatures seem to have gotten a better mixture and they are slowly making production (resin is a slow and painful process for any company, one of the reasons I hate the stuff) they have stated numerous times that they are putting metal to the end because its a different production run.  This is also quite true

 

I bought a set of their metal and resin miniatures from their shop before I kickstarted this so I knew what I was getting.  They are highly detailed and therefore their parts are incredibly fiddly.  the metal is a little less detailed but I think it is much easier to work with.  since I planned these for a sisterhood army, I am not overly concerned with high detail.

 

Overall, the haven't been the best KS I have ever dealt with but they are far from the bottom (drake has that honor).  their communication is different and they choose not to listen to the comments on kickstarter (I can't blame them, the foul sewer that is the KS comments section is really a home for trolls and other rotten life forms) but they do respond well to any questions or comments I have made on their website and were quick to assist when I had a problem and contacted them through their preferred channels..

 

I guess this is a long winded way of saying I understand the disappointment, but I don't get the hate. No they aren't Oathsworn or Reaper, but they aren't Drake or CSM either. As for attitude, has anyone tried to talk to customer support for GW about a problem?  Now there is attitude!

 

Just my thoughts, you can take them or leave them as you will.

 

Roo

  • Like 4

Share this post


Link to post
Share on other sites

Yes, they aren't any later than some other KS projects - which in itself is no excuse. Delays can happen, that's not what most people are angry about.

Communications: Could be worse (there is almost always somebody who does things even worse), but are far from good ... that together with the delay is in itself enough to make people unhappy.

The first miniatures I received were almost impossible to glue together, much less to paint because of the release agent problem. These are miniatures for the rubbish bin, but no replacements were offered despite the fault lying clearly in their field of responsibility. Furthermore, some of the resin was so brittle that it broke far too easily - and again their field of responsibility. Their second KS, they have been around long enough. They chose the company to do the castings (again a company with experience but also with a certain track record) - their field of responsibility.

Second batch of minis: better, less grease. But: gates/vents in places that are atrocious. You hardly can't get the parts off the sprue because the part is half the size of the vent - or because the vent flows almost seamlessly into some intricate detail. That's not fiddly, that's insulting.

Metal would be at the end of the production, they were clear about that - nothing to complain about.

Having had direct contact I also have to say they are quite pleasant to "talk" to and seem to be very helpful and fast with certain things (but see above).

The miniatures have the potential to be awesome, which makes the above criticism even worse. The price they are asking is reasonable for the detail, but not reasonable when you consider release agent problems and gates/vents and brittle resin.

  • Like 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SamuraiJack
       
       
      About this project
      The Hobby Holder is a better way to paint miniatures, period.
      There are so many awesome miniature games on the market right now like Kingdom Death, Shadows of Brimstone and Descent to name a few as well as some great RPGs (anyone else excited about Starfinder?) and tabletop and wargames. Not to mention all those Bones miniatures from Reaper that will need more than a little bit of paint.
      Enter the Hobby Holder, a versatile, all-in-one miniature painting holder and grip system that’s not just for gamers but for hobbyists of all kinds.
       
      Ideal for painting, sculpting, model building and more!

      Accepts Popular and Household Painting Base Options
      Accepts standard 28mm soda caps; Games Workshop - Citadel ™ Paint Caps; Privateer Press - Formula P3 paint caps; and 20mm cork inserts.
      Offset handle accommodates various height miniatures while allowing for painting and airbrushing from any angle.

      Lots of room all around your miniature.
      55mm from base to under side of the handle and 25mm from center of base to the side of the handle
      Unique QuickClick attachment allows you to easily switch between grip, handle and base-only configurations and provides 360-degree rotation for ultimate control.

      Dozens of positioning options to fit your painting style, including the ability to use the handle as a brush or tool support as well as a table rest for greater control.

      Accepts wider base options in grip and handle position - great for dungeon scenery or larger miniatures.

      More Great Features
      Made from strong, yet lightweight ABS plastic 4mm center hole for removing corks. Just push a brush, file or cork popper through and out pops the cork. Ergonomically designed and tested for maximum comfort while painting or sculpting Dishwasher safe for quick cleaning Can be stripped with Super Clean or Simple Green to clean at a project’s completion, as well as while miniatures are still attached to restart a project Reduced mess! Keeps your hands and work space cleaner Made in the USA Perfect for tabletop gamers, war gamers, and board gamers to get to the game faster with more awesome miniatures Great for everyone – from those just getting into a hobby to seasoned professionals!  
    • By SGHawkins09
      This is live.
       
       
      Some highlights from the main page:
       
      About this project
       
       
       
      Welcome to the Infinity RPG Kickstarter, help us fund an RPG based on the massive Infinity skirmish miniatures game!

      The Infinity universe was launched by Corvus Belli as a hugely-popular tabletop skirmish game in which sci-fi themed miniatures simulated futuristic battles across the alien battlefronts of Paradiso and the internecine conflicts of the Human Sphere. Before there was a skirmish game, though, there was an RPG: Infinity started life as a homemade RPG setting for the early roleplaying adventures of Corvus Belli founders Alberto, Carlos, Fernando, and Gutier. We've been playtesting the Infinity RPG with hundreds of people for the last 9 months, working hard to recapture the excitement of those first sessions and ensure that the feel of the Infinity universe will be captured in your own campaign!
      This Kickstarter has funded the production of a beautiful full colour, hardback 368 page core rulebook for the roleplaying game. It will be sent out in PDF in December and the printed books in February 2016. We are also going to fund Faction supplements, campaign, amazing geomorphic tiles, custom dice, accessories, upgrades to increase the content in certain books and much more.

      In the twisted jungles of Paradiso, humanity fights for its survival. The fierce, alien warriors of the Combined Army have poured through the Acheron Gate, descending upon the emerald jungles of the newest colonial world in a seemingly unstoppable torrent. The bestial Morat pound the Paradiso Front, where brave men and women fight ceaselessly to maintain a desperate defensive line which the sly Shasvastii penetrate with devastating ease. In the star-swept skies above, the collected might of humanity’s armadas maintain a life-or-death blockade to cut off an endless horde of alien reinforcements. And if any of humanity’s fractious forces should falter, then all may be lost…
      But beyond that terrifying holding action, the intrigues and adventures of the Human Sphere spin on. Space pirates cruise through the shattered planetoids of Human Edge. Scientist adventurers delve the oceans of Varuna. Merchant guilds scheme amidst the scourging sands of Bourak. From Yutang, the Emperor gazes forth from an uneasy throne. Titanic war machines stride across the icy plains of Svalarheima. Byzantine hypercorps struggle for dominance amidst the chrome towers of Neoterra.
      For the last ten years, players have tested their mettle upon the battlefields of the Human Sphere in Corvus Belli’s hugely-popular Infinity skirmish game. Now you can expand your adventures, diving deep into the amazing, never-before-seen depths of the Infinity universe with the ultimate science fiction roleplaying game.

      Play with the full dynamic 2d20 game system featuring:
      Cinematic action driven by the twin engines of Heat and Momentum The triple battlefields of Warfare, Infowar, and Psywar A multifaceted Zones system which brings the game world to life All New Artwork of the Infinity universe commissioned by Modiphius and Corvus Belli Find out more about the 2d20 System further down the page Explore the definitive guide to the Infinity universe with: A complete Chronology of the Human Sphere detailing centuries of bloodshed The culture, history, and intrigue of seven powerful factions Gazetteers for all twelve planets of the Human Sphere, including beautiful, full-color maps Leap into your character by: Forging your identity with an immersive Lifepath character creation system Fighting for your faction with the fractious, innovative Wilderness of Mirrors scenario design system Facing dozens of fearsome, ready-to-play adversaries who stand between you and your destiny! A 368 page book packed with everything you need to roleplay in the Human Sphere and beyond!
      Here are our popular Pledge Levels, we'll be adding more as they are unlocked. Note: There will be more Bostria Art Pledges for the Core and Supplements unlocked, we'll send an update before they are so you have a chance to grab one

       
      ETA: Link to Kickstarter
    • By The Gibbergeist
      Hi,
       
      Hope you don't mind me sharing my little Kickstarter. It's about a collection of circus oddities in 1/35th scale. :)
      https://www.kickstarter.com/projects/859512613/freak-circus

       
    • By pcktlnt
      https://www.kickstarter.com/projects/sodapopminiatures/rail-raiders-infinite
       
      I skipped some of the other information. Stretch goal, game play, unlocks.
       
      Chibis!
       
      --- Edit ---
      Flipped the two posts as per Darsc's suggestion. :D
    • By SamuraiJack
      https://www.kickstarter.com/projects/wyrmwood/the-wyrmwood-magnetic-game-master-screen?ref=category_newest
       
      From Wyrmwood: a GM Screen that will change the way you play your favorite roleplaying games. It is the only screen you'll ever need.
  • Who's Online   54 Members, 4 Anonymous, 0 Guests (See full list)

×