Prism Dice : Handmade from Bulletproof Glass by Relic Dicedunded

67 posts in this topic

About this project


Hi everyone. My name is Holly Benton, and I run Relic Dice. We are a small team of craftsmen and women. We hand-make dice in Portland Oregon out of the coolest materials we can get our hands on.

We are RPG players and Board Gamers. We are fans. Artists. Forgers. But most importantly we are perfectionist. We polish till we can get it right.

I started Relic in 2014 when others in my gaming group started asking me where I purchased my dice. To begin with, I just made dice for myself. I thought it would be fun to bring something a little more classy to the table. But after my group seen them, they were no longer just for me. Soon, my group showed them to other players, who started to ask for dice themselves. Obviously there was a market here as long as the product was amazing and affordable.


We have been working on this Kickstarter for the last two years, and it's finally ready. We wanted to create a brand new type of Polyhedral dice. Presenting Prism Dice, made from the same family of Materials as Bullet-Proof Glass.



It started off simple enough, but turned into quite a undertaking! We remade every aspect of a Polyhedral set from the ground up. We changed the weight, balance, feel, font, everything about a standard die. Anything less than that would have been insufficient.

Prism Dice have many features that makes them unique.

They are Sharp Edged with solid points. This was done to help make the dice more random. Dice that are mass produced overseas are tossed into rock tumblers and it grinds down the corners. The problem is this affects the dice during roll and tends to favor one part of the die more than others. Ever have that unlucky die that never seemed to roll well for you? It's not just in your head! Randomness in our dice was incredibly important to us, so we figured out how to keep those edges as sharp as we could so the dice was truly random.


As you can see from our D6 sample, our dice have crisp and clear lines.

Our dice were designed to be the best functioning dice you could buy. Plastic dice are too soft, and with rounded corners are not random. Metal dice have sharp corners but are way to heavy to really get momentum to roll. We have found the perfect balance for these dice for maximum randomness, while still keeping the die lightweight. Prism die both look amazing and feel great in the hand.

We wanted our dice to be made out of a fantastic material. The problem with that is it needed to be very light weight and strong at the same time. Another issue that was very important to us was clarity. We wanted our Dice to be Crystal Clear unlike any dice ever made. We found Bullet-Proof glass to fill all the these criteria, and more! Plus, it's Bullet-Proof glass, and that is just awesome!


The photo below will show the light passing through one of our D20's. In the shot is a standard Die for comparison. Look at the shadow of our D20, and you will see how much light is going through!


Prism Dice needed to be durable. Although it may have glass in its name, we wanted you to be comfortable using these dice. Dice are meant to be rolled! Anything that you need to roll one at a time on a velvet mat is not really a gaming tool, it's a prop. Nothing wrong with that, but we wanted something rock solid with a lifetime guarantee.

To put it plainly. We stand behind our product 100%. I will offer a lifetime guarantee on all work that comes out of our Forges. If any of our Prism Dice ever break or chip through normal gaming use, I will mail you a new one. These dice were made with a promise. They will outlive me, you and your kids. Simple as that.

But a Die is only as good as the person who makes it. Another big one for me was that all items are made by hand in the USA. We don't outsource anything, and we never will. Yes, things cost me more. Labor is more expensive. Tooling is more expensive. Materials are more expensive. But it is a cost I am willing to take on. I have faith that enough people are willing to support a product that wont sit in customs containers for six months to get to them. I have faith that enough people are willing to support local American talent. So all Prism Dice are made right here, in Portland Oregon.

3 people like this

Share this post

Link to post
Share on other sites

These are the colors.



 Fire Agate















Edited by SamuraiJack
3 people like this

Share this post

Link to post
Share on other sites

These are much like some dice I have from the 80s that are far better than currently made dice...

Share this post

Link to post
Share on other sites

Dang! That's some hardcore gaming if you need bullet proof dice.

I mean, there's been time I've been tempted to throw my dice against a wall, but not to shoot them.


Interesting idea though. (The bulletproof part, not the shooting part)

1 person likes this

Share this post

Link to post
Share on other sites

I like transparent dice, thou I wish they had a darker green color to choose from. Still I'll keep a eye on em,

2 people like this

Share this post

Link to post
Share on other sites

Likely will back. Because dice. And it's me.


And it's dice. :wub:


Amethyst it is...

5 people like this

Share this post

Link to post
Share on other sites

Oooooh, those are so pretty!! :wub: But oof, the price point is a little high for what we can afford right now. I'm not faulting the project creator, bulletproof glass has got to be costly, just can't justify paying $60 for a dice set (especially given the combined amount of what I've spent on dice kickstarters just in the past couple of years...).


I may drop in on the single random die pledge level, though, just for the coolness factor. ^_^



--OneBoot :D

4 people like this

Share this post

Link to post
Share on other sites

60 for a set? Wow! And people complain about the cost of the game science dice! Having said that, they are beautiful looking.

Share this post

Link to post
Share on other sites

Yah I finally went to the project page today to look at prices (forgot to the other day). $60 is more then what I paid for the Pathfinder metal set....


Still they are nice.

1 person likes this

Share this post

Link to post
Share on other sites

I starred this project for now. It closes in 27 days so I've got time to decide if I want a set or not. The price point is very steep, but they are made in the USA so I love that. I just wonder if all the 'hype' behind their balance and randomness is legit, or just what they think should happen. I don't know anything about dice mechanics, so I'm skeptical any time I feel like I'm being 'sold' on something.

Share this post

Link to post
Share on other sites

Hey Everyone! I'm  Holly, this is my baby.


I was notified in via private message section that someone put up a notice on reapermini forums about my Kickstarter. ( How cool is that! ) So I wanted to stop in and say hi. I will see if I can answer everyone in order :)


First, Thanks to


For putting this thread up.


@ Aryanun

Is that not sad? I remember buying dice in the 80's that were better then some of the dice we buy now-a-days.  I still have some high impact dice from the early 90's ( I'm a dice collector ) that I think are fantastic.


@ Gadgetman!

The Fire Agates are my personal favorite as well :)


@ haldir

I am currently working on that now. The kickstarter will have a 10th color as a stretch goal and if everything works out it will be a darker green. Green is the hardest color for me to make believe it or not, as I mix all these colors by hand in house and it has proven to be quite a little troublemaker! ;0



Thank you very much for the support!


@ OneBoot

Thank you for the comments! And you are correct, the materials are not cheap. Cheap plastic is low cost because the materials are low cost, sadly I can not compete with that.

I should tell you though, in the next few days I will have single D6 and D20's up for purchase as well, so that may be better for you than a Random Die! :)


@ Harrek

Thank you for the comments! I am really happy with how they turned out.


@ NomadZeke

Thanks! Let me know if I can help with any questions.


@ Adrift

It was very important to me to make everything in house. Part of the cost increase is that things done here are much more expensive and materials are not cheap. I did everything I could to cut costs down, I even purchased all the tooling out of my own pocket for the kickstarter just to be able to keep costs low!

Hopefully you don't feel like I am trying to "sell" you on something. :) I will have a video up soon ( In the next 5-6 days ) that shows some randomness tests for the dice. There is a lot of research about dice balance that has been done by people, and most of it says this.


Dice get unbalanced during the curing process. Manufactures speed up the process to save on costs which creates air bubbles in the mix. These air bubbles are what causes most of the imbalance in dice. With optically translucent dice you can look through them and see if they have any bubbles. If they do, they have balance issues. That is why casinos use optically translucent dice for craps tables!


But I have some tests that I have done for balance on dice. I just need to get the time to redo the tests and put it on video, after that I will get it online.


HOWEVER, having said that, I do finish these dice by hand.  As of such they are not going to be 100000% perfectly balanced, because to get the color on them that I do there may be a slight variance per die face. But it does pass a randomness test. More on that in the video later. If you need perfectly 100% blanaced dice you have to have them machined via a CNC machine out of Acrylic.


Sorry to ramble. If anyone needs me for anything you can send me a private message via Kickstarter and I would be glad to answer any questions!



8 people like this

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Harrek
      Dark Swords new project.  The one they cancelled recently relaunched.
    • By SamuraiJack
      <<<MOD Edit>>>
      Link to the Live Kickstarter:
      Dear friends, we are ready to announce that our Kickstarter campaign "The Quest" will be relaunched in september! Everything is almost ready, and we are now in colaboration with our friends of Figure Painter Magazine Everything has been enhanced and we are sure you´re going to love it. Keep in contact!

      FB Pre video:
    • By ForgePrints
      And we're live!
    • By SamuraiJack
      About this project
        Along the Great Northern Trade Route that leads to the town of Midlam, merchants come from distant lands to buy and sell their wares.  
      One such trader is the Great Sultan, who has brought along his entourage of advisers, entertainers and of course, his guards.  Also, arriving close behind the Sultan are rumours of strange and exotic wizards, and something more sinister.  
      Could it be, that he hopes to escape the curse of the Undead Pharaoh, who's tomb he ordered looted for it's fantastic treasures?
      Whatever the truth of the matter, the High Wizard of Midlam has chosen to investigate these rumours...
      Midlam Miniatures are pleased to present a collection of six 28mm scale mages & priests from the distant desert lands, for all of your Fantasy Egyptian, Pulp and Arabian Nights games.
      The Undead Pharaoh  
      The High Priest  
      The Priest  
      The Priestess  
      The Sorceress  
      The Princess This is our fourth Kickstarter, and we are using it to help develop and extend our existing range of 'Arabian Nights' miniatures.
      We have also included an option to purchase 'An audience with the Great Sultan' alongside the six mages and priests.  The set includes twelve miniatures: The Sultan on rug, two guards, female guard with spear, assassin, servant with fan, panther, caravan guard, adviser, snake charmer, rug merchant and sword swallower.
      An Audience with the Great Sultan Getting this project funded will not only help us get these figures made, but will also help us plan and create future ranges and expansions. 
      Our three previous Kickstarters, Wizard Apprentices, Wizard Halflings and Cultists of the Kraken Lord all successfully funded and delivered on schedule.
      We are also happy to receive suggestions on what to make next!
      PLEASE NOTE: The miniatures are cast in a high quality pewter, with a high Tin content, but may contain a small quantity of lead.   We unfortunately cannot guarantee lead free models.
      They are not toys, and are not suitable for children. 
      We regrettably do not have the ability to produce resin miniatures. 
      All miniatures are supplied unpainted.
      All images and miniatures are ©2017 Midlam Miniatures.  
    • By ladystorm
      This is an informational only thread. Chatter will be culled. 
      US Zone Shipping Complete! Questions, Help, Europe and Pacific Status!
      0 Comments      Like     Like the title says, we're done shipping US Zone rewards! (well, there's a few that had problems that needed resolving, but less than a dozen out of 10,000). Now that US Zone fulfillment is concluded, it’s important for us to address a few things.
      First and foremost, THANK YOU from all of us at Reaper for your patience while we worked through the delays and tribulations of fulfillment. We know that it wasn’t always easy, and sometimes there was a great deal of frustration, but we made it! We truly could not have accomplished all of this without your support.
      Pacific Zone and Europe Zone Fulfillment Status and Timelines
      Before we pulled ANY US Zone orders, we made sure that all Pacific Zone and Europe Zone rewards were loaded onto containers to ship to their respective hubs. We have 2 containers heading for ports in the UK and Australia. We cannot predict with certainty how long these will take to clear their respective Customs centers, so it is difficult to give a precise timeline. 
       Aetherworks of Sydney, Australia will be handling our to the Pacific Zone, and they are currently expecting to be able to begin shipping sometime in July. 
       RHQ Zombie Co Ltd of Nottingham, UK will be handling our to the Europe Zone and they are also expecting to be able to begin shipping sometime in July.
      In both cases, you will be notified via email by the shipper with a tracking number. We will keep you informed of any changes.
      And now, we're going to talk about the most common questions and problems you've been emailing us about, and how to help us help you out.
      My Shipment was Lost or Stolen 
      Your tracking information says that the package was delivered, but you do not have it. 
      You must open a claim (sometimes called a Trace Process) with the carrier for a stolen or mis-delivered package. Once you have done so, contact us at with your order number , name, tracking number as shown on your pledge manager, and any claim # or confirmation # provided, and we will follow up. 
       You can Open such a claim at the link below - simply provide the information requested and follow all necessary steps. 
      If it becomes necessary to send a second shipment, we may request a new delivery address for your replacement shipment, to help ensure proper delivery.
      I have no Shipping/Tracking e-mail
      You can find your tracking number on the Pledge Manager. Simply log in, and it will be in the right hand column above your itemized list of rewards. If no tracking number shows up, please contact us at and we will try to get it sorted out as fast as we can. 
       Be sure to include: 
      Your Order Number as shown in the Pledge Manager (Not your backer number)  Your full name as shown in the Pledge Manager  Your shipping address as shown in the Pledge Manager  Do not include any attachments or screenshots unless we ask for them. Attachments are incredibly insecure, and we do not open attachments from untrusted and unknown sources. Emails with unsolicited attachments will be deleted without being read. 
      My Tracking Information has stopped Updating
       Your package has been sitting in Chicago, IL for days/weeks with a status of "Package departed international carrier facility" or similar. (This is common for International Backers.)
       Unfortunately, we cannot guarantee the accuracy of the "status" of your package, and it is especially well known that some National Postal Systems do not integrate their data well with the US Post. So for some customers Tracking will end once it leaves the US (or reaches Chicago), and you may not even receive an update that it has arrived in your country. The notice you have "Departed for International Carrier Facility" means it has been handed over to your National Postal Service, (or at least was loaded on a plane to go to your country's post) and in many cases, tracking simply stops there. You may ask of your National Post if they can locate the parcel for you, but not all tracking numbers provided by the US Postal System are considered valid numbers by all international carriers. 
      Be aware that we have access to the same data that you do, and as we no longer have the packages we have no more data than you have.
      I Ordered the Fat Dragon PDFs and there are none in my box
       We had a set of 4 FREE downloadable Dungeon Tile PDFs, provided by Fat Dragon Games, available through the Pledge Manager. To receive these items, backers needed to click the download links in the descriptions within the Pledge Manager. We also made these links available in Update #74 On June 10, 2016. 
       EZ Tiles: Dungeons 1 FREE PDF
       EZ Tiles: Village Streets 1 FREE PDF
       EZ Tiles: Wilderness Ruins FREE PDF
       Ravenfell Core Set FREE PDF
      These links will not be shared again.
      My Pledge Level was called “Core Set Wave #” But I did not receive a Core Set
      In almost every case, this is because in the Pledge Manager, you selected rewards that spent your pledged amount, but did not select a Core Set among your rewards. We are not responsible for shipping items that you did not order. This is a common enough problem that in the Project FAQ we mention that you had to select a Core Set to receive one.
      There is a Missing Part From my Order OR a Missing "Bit" from a Model
      If you are missing one or more models, or one or more parts from a model (whether an entire model or simply an arm/head/weapon/etc.) please contact us to receive a replacement. We will not "replace" parts which are not listed on your Invoice or were not locked in on your Pledge Manager. 
       Send your email to Be sure to include: 
      Your Order Number as shown in the Pledge Manager (Not your backer number)  Your full name as shown in the Pledge Manager  Your shipping address as shown in the Pledge Manager  The part number of the item in question as shown on the large graphics of the Home Page of the Kickstarter Project.   A brief description of the problem - “Model xxx is missing her left wing”, “model is damaged or mis-cast”, etc.  Please remember to refer to the model’s left and right sides as if you were the model in question. This is the most common mistake of this kind, misidentifying the left and right sides. Please help us to get the correct parts to you. 
      Please DO NOT include screenshots or attachments of photographs of the miniatures or boxes when you email us unless we request it. Attachments are incredibly insecure, and we do not open attachments from untrusted and unknown sources. Emails with unsolicited attachments will be deleted without being read.
      Likewise, emails that are exasperatingly long and complex, or which contain vulgar and abusive language will be moved to the end of the queue, and in extreme cases will be deleted without resolution. If we cannot determine your problem and the appropriate resolution quickly, we will not take hours to do so, nor will we wade through paragraphs of profanity and insults to our heritage to help you. Please send only one email of this kind. Sending a new email each day with “Oh I just noticed this” will not help. If you have already sent an email, reply once to the first email with the required information.
      We will not begin the replacement process for missing or damaged items for several weeks. It will take us some time to reset and be able to process these emails.
      The Address My Rewards Were Shipped to is Incorrect
      Sadly the package has already been shipped. We are unable to change the address in transit. If your package shipped via UPS, you might be able to make a MyUPS account and update the address. If the package is returned to us and we must reship, you will have to pay for the second shipment as well as provide a new address
      Customs wants a printed Invoice
      You can print your invoice from the Pledge Manager, under Completed Orders. This is significantly faster than waiting for us to mail you a printout of that same page.
      Customs is billing me for import fees/duties/VAT
      While the majority of Canadian, EU, and AU backers are being shipped with methods that mean this will not be a problem, a small number of shipments may still come with such fees due. This was discussed in our Project FAQ you are responsible for any such fees.
      My Pledge Manager shows no Orders, or I have no Pledge Manager Account
      A created and complete Pledge Manager account is required for us to be able to fulfill your rewards. It is required for two reasons: 
      1) It supplies us with all of your contact and shipping information and  2) It details to us your list of rewards.  If you have this problem it is because you either never created a Pledge Manager account or you never updated and completed your existing Pledge Manager account. The occurrence of either of these events has created a problem for you. So before you contact us and tell us how bad and irresponsible we are in how we conduct a Kickstarter please review the following. 
      To remind you and encourage you to complete your Pledge Manager account we have:
      Included a large graphic link to create your Pledge Manager account right after the Stretch Goal Map in the body of the Kickstarter campaign.  Included step-by-step screen shot instruction on how to setup and use the Pledge Manager in the body of the Kickstarter campaign.  The Kickstarter FAQ contained several entries of important Pledge Manager information.  Since August 2015, 19 separate Kickstarter updates requested you complete and/or update your Pledge Manager. Kickstarter is considered the official channel of all updates. Not social media or direct emails.  In June of 2016, we sent emails to everyone with an incomplete Pledge Manager account requesting that they please take the time to complete their Pledge Manager.  We kept our Pledge Manager open for 10 months and a further 9 months we helped anyone who contacted us by opening up their Pledge Manager for them so they could complete their rewards order.  We have provided a reasonable amount of time for you to complete your part of this equation. Kickstarter Terms of Use state: The creator may need to send you questions about your reward: To deliver rewards, the creator might need information from you, like your mailing address or t-shirt size. They’ll request that information after the campaign has succeeded. To receive the reward, you’ll need to provide the information in a reasonable amount of time.
      So what can you do? Please contact and we will attempt to work with you to find a solution. In your initial contact, please detail your extenuating circumstances, such as active military service and deployment to an Internet-restricted region. (If at all possible please do not start your contact with us by telling us how stupid we are. Believe it or not it will help you a great deal. Just sayin')
      Anything Else
      If you have any other questions, or a problem not discussed above, please contact us at with:
      your order number as found in your pledge manager, (Not your backer number) your full name, your shipping address, the email address associated with your pledge, a brief description of your issue.  We will do everything we can to help you. It is very likely we may need additional information from you after the initial contact, but this at least helps us get started. 
      Please DO NOT include screenshots or attachments of photographs of the miniatures or boxes when you email us unless we request it. Attachments are incredibly insecure, and we do not open attachments from untrusted and unknown sources. Emails with attachments will be deleted without being read. 
      Please remember that we have received over 4,000 emails in the last 3 weeks and we are going through them as fast as we can. If you are rude or abusive in your e-mail to us, or if your email is many paragraphs in length, we will move your e-mail to the end of the queue.
      Upcoming Convention Schedule
      We will be attending Origins Game Fair June 13th through June 18th. Because we are a small company, our customer service Team is also our Convention Crew, and we will be unable to process emails until we return. 
      Thank you for everything! 
  • Who's Online   54 Members, 3 Anonymous, 0 Guests (See full list)