Jump to content


Recommended Posts

I will be building 2 custom 12*9*1 foam storage trays for my metal minis, using foam, felt, foamcore.

Yesterday I applied felt to the first side of the foamcore base. Today I will apply felt to the other side. This will give a sturdy base and something soft for the minis to rest on. Second side is so that I can layer them and worry less about scratching.

Total cost materials glue, 5$ foam, 1$ felt, 1$ foamcore.

Bonus, I have trays that will fit in my fancy Muji storage boxes.

Photos later.

  • Like 5

Share this post


Link to post
Share on other sites

Excellent. I was just pondering how to build carrying cases for my Zombicide and Descent minis. 

Share this post


Link to post
Share on other sites

Uh. Not much to show yet.
Photos of Muji box, foamcore with felt and an idea of the foot print. I'm hoping that weight when I glue the foam will take care of that gap.
If you live in the US there are tons more options. But where I am I'd have to do crazy bulk purchases 1000 times more than I need.

 

Apparently these trays will also fit in the 9L Really Useful Box.

post-12970-0-99018100-1476797455_thumb.jpg
post-12970-0-75182500-1476797686_thumb.jpg
post-12970-0-19756600-1476797759_thumb.jpg

 

Edited by lexomatic
  • Like 4

Share this post


Link to post
Share on other sites

Things got derailed when my template sheet was more parallelogram than rectangle,and not big enough to adjust. I have found a suitable replacement and things will continue.

  • Like 2

Share this post


Link to post
Share on other sites

So many issues with real life, I've hardly done a thing.

I've finished measuring and penciling my template. Roughly 1.5*1 inch holes 42 per tray.the site is being a pain so photos later.

  • Like 1

Share this post


Link to post
Share on other sites

So I did.

Pre-paint mini for scale though this is just for metal home storage.I'm going to try to build staircases with the template cutouts. Pics later.

  • Like 1

Share this post


Link to post
Share on other sites

I never posted an update with photos. here's a big dump. Thinking about stairs with the cardboard. Anybody have good examples? Anybody have suggestions for squares of upholstery foam?

 

 

post-12970-0-03055000-1478805398_thumb.jpg

post-12970-0-46485800-1478805426_thumb.jpg

post-12970-0-79566600-1478805443_thumb.jpg

post-12970-0-76419800-1478805524_thumb.jpg

post-12970-0-43708700-1478805579_thumb.jpg

post-12970-0-45125500-1478805623_thumb.jpg

 

  • Like 5

Share this post


Link to post
Share on other sites

So here's a few more pics of stuff. The nicer tray is drying now.

Biggest pain was cutting the foam. I went through so many blades. It was relatively neat but sometimes you cut on an angle without noticing so it's a smaller space than it should be. Also sometimes I cut so much further than I thought - foam is pretty tough I guess. Not worth the effort unless you need to save money, or you have a special container you want to fit everything in.

Share this post


Link to post
Share on other sites

I think it would be better than the utility knife I used. While a foam cutter is cheap I don't really have enough justification to buy one. At most I'll be doing this 7 more times... Which will mean 20 times more minis than I have now in the ratio I buy bones to metal.

I'm not sure how safe minis would be if you intend to transport them in trays like this, but about 3+ would fit in a 9L really useful box.

Edited by lexomatic

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MickeyMauser
      Hi,
      I have the Razig Adept mini. Comes with a pair of hands gripping chains. Very cool. Trouble is, the right hand, all on its own accord, just flew out of my grip before I could secure it to its designated wrist and just threw itself into the void, never to be seen again. 
      I know, its not that small, I tore that whole place up in search of it. Where...How the....anyway, is it possible to get spare parts?
       
    • By haldir
      Facebookey page
       
      Yup, I'm backing!
    • By Orlando_the_Technicoloured
      https://www.kickstarter.com/projects/russrmc/animal-adventures-tales-of-dungeons-and-doggies/description
       



      So you have seen the minis but what about the rules doc? Well, here is just one example of the art quality thanks to the incredible talents of April Prime! Amazingly, this is still work in progress, but she is working on art for every dog and a few bonus pieces as well....hmmm..maybe art prints should be available...


      Here's a small piece of Dungeons and Doggies fiction to enjoy! Every mini will have an associated 'icon character' pre generated in the rules pack,and for the Cleric role we have Cerysse, gentle but determined protector of her friends. Many thanks to Kate, our writer, for providing this and many other story pieces for the project! We will follow up with a rules preview for the Companion Domain soon!
    • By lazarp
      These two were made out of hot glue and given a quick paintjob by my sister and me. I like how they look and I made 4x medium and 8x small ones the same way. Will post them too when painted If you like these! :D
       
      Next to a reaper bones orc:
       
       

       
      Before the paintjob:
       

    • By lazarp
      I made these out of cotton wool and watered down white glue 
      Hope you like them as much as I do! 
       

       
      next to a wizards of the coast water elemental:

       
      next to Reaper 77280: Lich:

  • Who's Online   27 Members, 0 Anonymous, 109 Guests (See full list)

×