Recently Browsing 0 members
No registered users viewing this page.
I've finally gotten around to taking some photos, so I figured I'd share. A little info on the minis first though. All the bases are made with broken up cork board that was picked up from our local hobby shop. Then dusted with some sand and painted, then flocked. These little guys were clear coated pretty heavily for table use. Sorry about the quality of the photos. It's the best I could achieve with a cell phone. They aren't nearly as glossy in person, and their skin is quite a bit more olive colored in person also. Anyways, here are the item numbers from reaper if anyone wants to hunt them down for themselves:
03400, Orc Spearman and Swordsman
03405, Black Orc Hero
03429, Black Orc Archer (X's 2)
03489, Black Orc Warriors
Not specific to any particular campaign or RPG - just a place for folks to share adventure seeds for urban fantasy campaigns, since it came up on another thread.
[Dark] The players are hired by a necromancer to learn who murdered one of his corpses. She was engaged to be wed the day before he purchased her remains, and is not happy about being dead....
[Humorous] The Goblin bard and his band has cast Irresistible dance, and to the players' horror... it is a polka.
The Auld Grump
By Lidless Eye
My most recently complete project is the lovely ladies of Oathsworn Miniature's "Heroines in Sensible Shoes 3" Kickstarter.
As always, they are a joy to paint. They have nice, bold details but without being overwrought. They definitely look like a bunch of starting adventurers! The theme this time was more exotic races, notably a bunch from "Volo's Guide to Monsters"
The ladies ascend the mountain:
The Kitsune. She could be a lightly armored Fighter, a Rogue, or a Ranger.
The Kenku (or Tengu) Shaman. Or Wizard. Or Sorcerer. Or whatever. She's got a bone to pick with you!
The Kenku or Tengu Rogue. I went with oranges for them to continue my previous work on the Bones Tengu...which were also dressed in orange to match the official D&D pre-paints.
The Dragonborn, could be a Fighter or Paladin. The decision to make her red was regrettable...with that pointy face and dreads, I kept thinking of Ugandan Warrior Knuckles. Stupid memes getting in the way!
Tabaxi or Catfolk. I tried to go with more of a Ranger color scheme than the intended Rogue.
The other Tabaxi/Catfolk from the set. I liked the intent of this sculpt...she could be a spellcaster, a Monk, or a Bard!
The Halfling Knight.
Her mount was painted after my own painting gremlin, Hershey. He would be much smaller to scale, though.
The Tiefling Paladin. I really like the pose of this one, though I questioned the hooves, as 4E and 5E Tieflings of this design have human feet. I may wind up greenstuffing her into boots at some point.
The Firbolg Druid. As far as I know, this is the only miniature of a 5E style Firbolg.
The Minotaur Swashbuckler. I bet you were expecting a cow joke here.
By Sophie was taken
This was a trio of orcs I recently acquired for cheap and liberated from 20+ years in blister packurgatory. They are from Grendel’s “Leviathan” line, and the sculptor is unfortunately not credited. These are some seriously hefty minis, slightly larger than (but still to scale with) Reaper’s Orc Berserker, et al.
Mostly I wanted to try out my new basing stamps and these guys made a good excuse for that. I also wanted to experiment with orcish skin tones. The remainder of the figures I wanted to make less “nice” and more “uniform”, so most of the details were simply basecoated, hit with some GW Nuln Oil, and occasionally highlighted. First up, the spear carrier:
For the skin, I used a base of MSP Brilliant Green. This is, in my opinion, a poor choice for orc flesh. Great for a tree frog though, probably.
For all three, the square leather armors are Leather Brown, and the fur fringes/hats a mix of Desert Sans and Mountain Stone (to match the orc from the LTPK). Cloth areas are Templar Blue, marking them as the Blue Team, I guess.
Next up, the...standard bearer?
Very similar in attire, with the addition of a big fuzzy cloak done with Intense Brown. I actually attempted to do some layering, but big and fuzzy isn’t the most conducive surface to work on. His skin is a 1:1 mix of Naga Green and Tanned Skin, and I think it came out quite nice. I really loved his expressive face and big tongue.
Finally, the swordsorc:
By this point I had ceased caring about quality (aside from skin) and my brush control was fading rapidly. Came out good enough in the end, though I wish I’d done his vest in a different color. Despite looking a bit greenish (to my eyes) in the pics, his skin is a 2:1 mix of Palomino Gold and Tanned Skin. I like it, it’s sufficiently “non-human” and a nice change of pace.
Comments and critiques welcome, leave them below. Additionally, if anyone can identify who sculpted these it would be much appreciated. The molds are currently owned by Scotia Grendel, but they don’t list the sculptor either.
The unrelenting, swarming, terrifying tide that is known as the Skaven... Also known as "skrit skrit of death-death to all, but maybe save a few bakers as they make delicious cookies and cupcakes!"
I'm playfully blaming a wolf for this thread, but it's a different one for a change. This time it was @Chaoswolf!
This is going to be a looooong project. Arguably it already is, since most of the initial contents of this army were purchased over a decade ago, but I have a tentative goal in mind of "fully finished by 2020" which gives me a year and eight months to work on it in between all my other projects - a goal I hope I can manage. It was originally supposed to be assembled six weeks after I purchased the 25th anniversary army box, and then there'd be a campaign, prizes and whatnot, but being stupidly busy with work kind of prevented that from happening back in the day and I wound up backing out of that event/tournament. Later on, Isle of Blood was added in. Either way, I've always wanted to have a big, GINORMOUS HORDE OF DOOM, and the Skaven definitely portray such in my eyes Always did like their lore, and more importantly, the models, the fluff, and the fact they're murderous, backstabbing buggers! Eshin has always been my favourite, but Skryre is definitely a close second due to their shiny shiny blasty murder-kill anything in their path.
Why the focus on Pestilens though? Well, truth be told, any good kill-kill stab-stab from the Skaven is going to be comprised of the various different factions, but the biggest part is that their models are some of the most eye catching to me. That and I already had a bunch of them, so I figured why not! Their siege weapons are also rather lovely, at least the Plague Furnace. I'm still debating about the Plagueclaw, but for now I still plan on having two in there for symmetry and versatility
At the moment, I only have about half (or so) the units I'd like to have, but I'll work on acquiring the rest over time. What do I have right now? (Spoilers added to be friendlier to mobile users)
(So.... Assuming I counted correctly, we're talking 201 minis)
And what's being added in?
(So.... about another 243 small models, 2 small siege units, and 11 siege weapons/behemoth added in bringing that to a grand total of 444 small units, 2 smaller siege units, and 11 large siege weapons. It's 454 small models total if you factor in the Mordheim models I probably have kicking around somewhere o_O)
Just for my own calculations, I'm writing down in a spoiler what I think will wind up being the entirety of the army...
...I kind of figured that if I'm going to go in, I'm going to go ALL IN. Sure, it's technically an army that's illegal to field due to too many leaders (18/8 if you include the on foot Grey Seer, 17 if you don't), and too many behemoths (7/5) with the new AoS rules, but it will give me that nice variety I crave, and flexibility to play in pretty much any size game. It will also look downright insane on a shelf once it's done I suspect. Technically, it's also a 8,940 point army as currently written, but that's just using info from the Warscroll builder, and not making use of any Battalions, which could theoretically change the composition of this army, and have me add (or possibly subtract) models.
Come to think of it, odds are I'll wind up taking a good look through the 9th age's website to get ideas for various other miniatures, because while this is technically an army I might field, I just want a nice, varied horde, and nothing says varied quite like adding in minis from several other companies ...Doubly so when some of their miniatures are a lot nicer looking (like say, the Jezzails, or even rat swarms). For example, Otherworld, Reaper, and Windmaster all have models that can easily fit in ~_^
Now... No good thread is without pictures, so here's a part of the reason why the next several orders from Reaper are going to have a decent amount of bases in them...
^That there is what I've been able to round up so far that isn't still in a sealed box. At least most are assembled, but there's that one annoying thing... They're all on 20mm square bases, and Age of Sigmar tends to prefer them being on round bases (most being 25mm, but some being other sizes)... Not to mention the fact i tend to prefer circular bases anyways. Thankfully, I used superglue for almost all of them, so that will help IMMENSELY. I'll also be doing up bases for each and every one of them, which is probably going to chew through a decent amount of my various supplies, given that the last time I did up some bases (earlier this week) I chewed through half of the 200g of Magic Sculpt I have (although to be fair, there were 2x 60mm and 16x 25mm bases for my Tau, even if it was just the broken concrete stamp it still uses up a good amount of putty).
I also greatly prefer the nice lip that Reaper's bases have, because it lets me try and have the added in designs be relatively flush with the "expected" height, unless I otherwise plan on having them be higher (like say, for heroes and/or leaders)
^ So here we have the bases for what was originally going to be my Censer Bearers, but it turns out those are supposed to be on 32mm bases, so instead these will be for my Poison Wind Globadiers, which rather works out because those haven't been based yet ...Happy fox to say the least.
^The top most 40mm base is for my Warlord (which will feature a decent more rubble on top of those cobblestones), while the other two are for two of my Rat Ogres. The 18x 25mm splintered deck bases are for my Night Runners. When I make the other 22x bases, I'll make sure to have more raw material so the details don't get squished when stamping. Most of them turned out alright, but some of them you could tell I didn't have enough and/or really should have had the stamp against something solid instead of my fingertips.
Up first will be the poison wind globadiers.... Once I clear up a bit of room on my cutting mat anyways, I kind of have a bunch of gnolls, kitsunes, and minotaurs taking up that space right now ^_^;;;;;;
Who's Online 41 Members, 3 Anonymous, 0 Guests (See full list)
- Paradoxical Mouse
- Balgin Stondraeg
- Darsc Zacal
- Cranky Dog
- Carnacki the Ghost Finder
- Sophie was taken
- Seer of the Pitt
- Knight of the Dinner Table
- Green Eyed Monster
- Pezler the Polychromatic
- Darius Glenwell
- Savage Coyote
- Geoff Davis