Jump to content

SamuraiJack

Kingdom Death: Monster 2

Recommended Posts

Sheer lunacy, but I can't wait to get my hands on all of it!  Did I miss it in the update somewhere...he mentioned in the summary at the top that there would be rolling delays for waves 3 and 4.  Or was I reading far too early this morning?

Share this post


Link to post
Share on other sites

That update has a ton in it!

 

I missed out on the things I might have picked up in the sale, but am trying to hold fast with only bumping up for one thing in the PM.

3 hours ago, Dan d'Lyon said:

Sheer lunacy, but I can't wait to get my hands on all of it!  Did I miss it in the update somewhere...he mentioned in the summary at the top that there would be rolling delays for waves 3 and 4.  Or was I reading far too early this morning?

Yes. That was in the update. Wave 2 is due to arrive in February ish.

Share this post


Link to post
Share on other sites

I went in for a second Pathfinders of Death and a second Gambler chest.  There are a lot of single minis I want in expansions and pin up groups but not enough to buy a whole set.  Gamblers chest should be able to be broken down to trade for those others.

Share this post


Link to post
Share on other sites

I finished sleeving my core set with FFG green sleeves. I also put the gear cards in Ultra Pro pocket protector sheets (20 per page. They fit four unsleeved cards in a slot). I cut four of them down to 3x3 and am using them as gear grids. 

 

Anyone sleeve their Settlement Events? 

 

Any suggestions on which sleeves to use?

Share this post


Link to post
Share on other sites
7 hours ago, SamuraiJack said:

I sleeved everything with the sleeves Pots had at gencon.  Still considering getting coin protectors for the tokens

I wish I could have gone...

Share this post


Link to post
Share on other sites

Rumors say PM closes tomorrow. 

I would have loved a Dragon King or DBK   for half of retail, 

but I just don't have it on hand, and can't afford the marital strife. 

 

 

Started the game with my RPG group.  in  5 hours we had 3 deaths, and killed 2 lions, and reached the showdown with a 3rd. 

  • Like 2

Share this post


Link to post
Share on other sites

I survived my first Butcher, barely. No deaths, though I did have a sacrificial goat out for him (bad things happen to the character in the #2 slot at the table). I used the cat eye circlet to snoop the HL deck and his one crit location was on top, founding stone to knock him down. Then he (of course) traps and messes everyone up. But his mechanic of shuffling the HL deck every turn worked against him as I ended up drawing that crit location twice more, the second time as a hit for my crit specialist. And even though he trapped AGAIN on that round (he also rolls 5 dice to hit...) it was enough to wound him to the point where we could take him out before anyone bled out.

 

Brutal encounter, and it was mostly luck that saved us. Awesome game! Also came close to getting the showdown reward that can be used to regrow a limb...would've been awesome to use on my settlement's leader who lost her left arm to the lion...

  • Like 1

Share this post


Link to post
Share on other sites

Has anyone tried playing this using Tabletop Simulator?  I can't really leave it set up on my dining room table, but a virtual one....  I just haven't used TTS very much and wondered how clunky it would be for this.

Share this post


Link to post
Share on other sites
5 minutes ago, Dan d'Lyon said:

Has anyone tried playing this using Tabletop Simulator?  I can't really leave it set up on my dining room table, but a virtual one....  I just haven't used TTS very much and wondered how clunky it would be for this.

 

I have. It all depends on which version you use. I'd recommend Nognoth's non scripted version. It's less up to date but a lot closer to the physical experience and the board components look closer (hunt track, settlement track etc).

 

Nothing's as good as the physical tabletop experience but Tabletop Simulator can e a good second choice if you just don't have space at the moment.

Share this post


Link to post
Share on other sites

 

10 minutes ago, Balgin Stondraeg said:

 

I have. It all depends on which version you use. I'd recommend Nognoth's non scripted version. It's less up to date but a lot closer to the physical experience and the board components look closer (hunt track, settlement track etc).

 

Nothing's as good as the physical tabletop experience but Tabletop Simulator can e a good second choice if you just don't have space at the moment.

I would play the TTS version. I haven't yet, but I would love to join a game.

 

If it is the old version, can you just pull cards from 1.5 when you know which one the TTS 1.3 version says to pull?

Share this post


Link to post
Share on other sites
9 hours ago, Talae said:

 

I would play the TTS version. I haven't yet, but I would love to join a game.

 

If it is the old version, can you just pull cards from 1.5 when you know which one the TTS 1.3 version says to pull?

 

There's a separate mod with the 1.5 upgrade pack cards in which can be imported and used to replace the old ones. It takes a little more technical jiggery pokery but it can be done.

  • Like 1

Share this post


Link to post
Share on other sites
45 minutes ago, Balgin Stondraeg said:

 

There's a separate mod with the 1.5 upgrade pack cards in which can be imported and used to replace the old ones. It takes a little more technical jiggery pokery but it can be done.

I may have to look into this...

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Knight of the Dinner Table
      Backed one of their KS, very timely delivery, great miniatures.
       

       
      all the way up to
       

    • By Jeneki
      https://www.kickstarter.com/projects/1103158358/warbands-of-the-cold-north-vi-ulfhildrs-heroes
       
       
      Project description:
       
      About
       Hello Again Kickstarter backers new and loyal, longtime supporters and fans of Red Box games! We have returned again to kickstarter in the hopes to fund our newest selection of fantasy norse figures that we call the Njorn. 
        Our intention is to fund the production of a new set of heroes and their faithful follower rank and file troops. We also intend to fund the set up of our in house production capacity! This means buying a spin caster, a smelter, all the various periphery of safe casting, metal shelves to hold molds ( LOTS of molds ) having our molds shipped to us from the various contractors we currently partner with, and raw metal to do the casting with. Being set up for in house production will allow us to reinvest in the various aspects that will make your experience with Red Box Games more efficient and better presented, as well as allow us to manage our working capital MUCH more efficiently.
        We currently reinvest a disproportionate amount of our profits into maintaining reasonable stock levels across the entire breadth of the red box games line. This is a HUGE investment that grows every time we add new products to the line. It also means we have to rely on kickstarters much more because we simply cannot afford to just put new items in to the store without knowing that the funds are already there to pay for the production and stocking of said items.

        Once set up for casting we will be able to keep the funds of the business' success where it belongs, in the future of the business. It also has the added advantage of allowing us to afford lower prices across the board and able to take chances on items which are too risky to produce through out sourcing such as larger monsters and cavalry and Rank and File sets appropriately priced for army building. 

        To insure that the high level of quality you have come to expect from Red Box Games is faithfully maintained, I will be training in casting with a VERY talented and experienced mold maker and caster. I wont be handling the entire burden of casting right away so there is no need to worry that this development will slow down delivery of the Kickstarter or the regular course of business for RBG.

        My molds will continue to be made by one of the industry's best studios as well so there is no need to worry that the burden will overwhelm me or that the overall quality of the Red Box Games product will suffer.

        I cannot do any of this without your help so please consider backing this kickstarter! You will get some really cool stuff for a GREAT price in a reasonable amount of time and I will FINALLY be able to set up for my own production and make some real progress in this industry!

        AAAaaannndddd without further Adieu...... ON TO THE MINIATURES!!!
       We intend to fund as many figures as this kickstarter will allow and at the outset of the campaign we have 19 figures ready to go with a few slight details needing to be added before they are ready for production and I still have several more underway which will be shown as they are completed and added to the campaign as the funding allows. 
       

       
       
    • By SamuraiJack
      About
      Chibis are super deformed, yet adorable characters that have lately have made a splash in the boardgaming and miniature community with games such as Super Dungeon Explore, Arcadia Quest, Ninja All-Stars and many others. They're also featured in collectible figurines and in other geeky paraphernalia.
      This is the EIGHTH Chibi KickStarter run by Impact! Miniatures and Impact! is partnering with Chibi Capsule and Märchen to bring you some incredible, new Magical Girl chibi miniatures along with monsters for them to combat!
      The funding goal will pay for the sculpting & 3-D printing of the miniatures. And for some of them: The metal masters and resin production molds needed to create mass production of the miniatures.
      The Miniatures  
      ALL miniatures in this KickStarter are provided unpainted. Unless otherwise stated after the name of the miniature, all miniatures offered with this KickStarter will be high quality 3-D prints done on a top end 25 to 50 micron printer (you should not see print lines after priming and paint).   As stretch goals are reached we will unlock additional sculpts.  Stretch Goal may also pay for metal mastering and rubber molds for mass production spincast resin models which will allow the project to offer some of the Magical Girls at lower costs to our backers.  The miniatures will require light clean up, being primed before painted and might need some assembly (although we will do our best to keep the figures with as few pieces as possible).  
      You can use your reward dollars to get any of the miniatures in the listing below.
      Meet the girls!
      MARIYA and the FIGHTING GIRLFRIEND - (70mm tall overall - spincast resin) - $10
       
      Magical Friends
      Monsters & Enemies
       
       
       
       
    • By pcktlnt
      About
      The Amazons are a new line of 28mm white metal and urethane resin table top gaming figurines from RBJ Game Company. Digitally rendered by Master Sculptor Bobby Jackson and faithfully brought to physical reality by Fortress Figures using cutting edge technology to bring you the unquestionably highest quality metal and resin miniature available today.
       
      Stretch goals apply to any pledge of $50 or more.
       
      (removed due to nudity) SCALE SHOT   PAINTED EXAMPLES   This project is for unpainted, white metal and/or resin figurines. Models are provided NOT painted. Models are scaled to 28mm toe to eye or 1:60. Models are provided with a plastic tab/slot base. White metal figurines are not toys and are intended only for adults. Models may require some assembly, may have sharp or pointed parts and are a choking hazard to anyone prone to put them in their mouth.
       

      SHIPPING  
      On the end of the campaign, each backer will be issued a coupon code via e-mail to redeem at our on-line store for your pledge rewards. This worked out very well last time around seeming to be the simplest way and also allows for some last minute additions if you desire. Shipping fees are not included in the pledge level and will be collected at the time you redeem your coupon code.
       
      Estimated shipping fees:
      U.S. $0 - $5 (U.S. receives free shipping for $50 or more pledges)
      Canada $0-$15 (Canada receives free shipping for $125 or more pledges)
      World Wide $0-20 (Free world wide shipping for $175 or more pledges)
       
      Customs fees, duties, taxes, tariffs and or additional charges incurred at the shipping destination by the receiver are the responsibility of the receiver. RBJ Game company cannot accept any responsibility for additional charges imposed by the taxing authority of the legal jurisdiction of the receiving residency.
    • By kodiakbear
      Coming after KS4 is delivering.
  • Who's Online   9 Members, 1 Anonymous, 0 Guests (See full list)

×