Grefven

Live
Black Scorpion Miniatures/Tombstone Kickstarter 5th april

39 posts in this topic

9 hours ago, Citrine said:

Not sure I can make my will save against this Kickstarter.  A have several of their metal minis and I really like them.

I do too.

Just saw pics of the undead sets. Some excellent sculpts in those. Very tempting.

Plus I don't have any undead western figures... Yet.

1 person likes this

Share this post


Link to post
Share on other sites

Sure wish I knew what western mini's were going to be offered in Bones IV. With Gloomhaven the previous day, Reaper Bones IV and Dwarven Forge in a few months, and the taxman in two weeks, there's not much budget left for 110 resin miniatures!

2 people like this

Share this post


Link to post
Share on other sites

I'm not in to Western minis thankfully.. but these do look awesome

17620542_10155941432703976_4259933414320

 

17621935_10155941432593976_6714903377335

 

17545342_10155941432713976_4050100075073

 

17621825_10155941433283976_5206501139946

 

2 people like this

Share this post


Link to post
Share on other sites

Aah, I don't need to get into another genre and/or Kickstarter...

Share this post


Link to post
Share on other sites

I like some of the female figures, but some of those legs are very long, even with the high heels.

Share this post


Link to post
Share on other sites

The sculpts look good but I am not really interested in the western theme and they are resin not metal.  Will save made.  I wish them luck,  but I wont be joining in on this one.

Share this post


Link to post
Share on other sites

I'm on the fence. I would be in if there were some nice town citizens to go along with them. There are definitely a few that could be converted to such though. I have a few Black Scorpion western minis in both resin and metal and they are among some of my favorites.

1 person likes this

Share this post


Link to post
Share on other sites

I find I like one or two from this set, one or two from that, same for another. But in those same sets there's usually one or two that I have no interest in at all.

Guess I'm on that fence with you.

2 people like this

Share this post


Link to post
Share on other sites

No, I agree. In all sets, there is at least one figure that I would not normally pick up. But each pack of 4 figures for £9. That is a pretty darn good deal, even if one particular figure isn't what one desires. E-bay the ones you don't like. :) The stretch goals are spaced out pretty wickedly insane, though. I wonder if they are really calculating to reach this high. I don't know how popular their pirate game is, or how large their fanbase is. But it looks like they have worked harder to prepare a lot in advance, so this should really be a smooth and fast fulfillment.

Share this post


Link to post
Share on other sites

Take a look at their website. The figures are only slightly higher cost, free shipping at 50 pounds, and some non-western miniatures as well. Still have four packs.

Share this post


Link to post
Share on other sites

Wonder what time this is going to launch?  Supposed to be today, but still preliminary.

Share this post


Link to post
Share on other sites

and it's live, and funded!  I failed my will save and went for the full meal deal + book.  I've been wanting to do a Wild West game for a while now, and I like the look of the figures.  <sigh>  Now to explain the charge when it appears on the card to the missus!

Share this post


Link to post
Share on other sites

That female deputy is sweet. I may go in for the "mix and match" option.  I think I have Billy the Kid from a previous KS or something. Or a very similar sculpt. 

 

 

Share this post


Link to post
Share on other sites

Watching for now....but I'm sure I'll be in for something.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Orlando_the_Technicoloured
      https://www.kickstarter.com/projects/674003445/resin-rolljordan-necro-and-volmarian-dwarf-fantasy

      WHAT IS THIS KICKSTARTER ABOUT?
      This KickStarter is a joint venture between Royal Art Games and Impact! Miniatures to bring two incredible looking metal Fantasy Football teams from Rolljordan into affordable resin for about half the price of the metal teams to give more gamers the opportunity to own these great models. The resin versions of these models will be molded from the re-touched masters that Rolljordan produced to make this a better more pitch-worthy team than when it was first released. The miniatures will be offered in Standard team which have everything you need to have a full team and Deluxe versions that will give you sideline characters (like cheerleaders) and star players.

      The KickStarter is bringing the Necro Undead and Volmarian Dwarf teams into resin. The KickStarter is also offering the teams from the last joint venture KickStarter at great prices.

      Here are the team and pack selections for the KickStater.



      The Deluxe team is the Standard team plus this Deluxe pack





      The Deluxe team is the Standard team plus this Deluxe pack





      The Deluxe team is the Standard team plus this Deluxe pack





      The Deluxe team is the Standard team plus this Deluxe pack






      The miniatures in the four teams are the new resin that Impact! started using this year that is stronger and able to be painted much easier than our past resin. The miniatures all come with bases and are provided unpainted. The miniatures will require light clean up and some assembly (although many of the models are one piece). Impact! Miniatures has created several KickStarters and delivered to all backers on all our previous KickStarters so bid with confidence. We are keeping this KickStarter small and focused so that we can quickly produce the teams and get them shipped out on time. NOTE on shipping: Shipping options are displayed when you pledge for a reward. Shipping is free to the USA, $5 to Canada and $10 to all other locations.
    • By Gadgetman!
      https://www.indiegogo.com/projects/ambionics-unique-prosthetics-as-seen-on-tv/
       
      About Ambionics
       
      My name is Ben.  I’ve been on an extraordinary journey over the past two years which started when my son was born.  Sadly, Sol lost most of his lower left arm due to a blood clot following an injury at birth.  
      I responded as any parent would have. I looked into how Sol would be treated and what support we could expect.  I quickly learned that many toddlers abandon prosthetics early on and I wanted to know why so Sol would stand a better chance. Calling on my psychology background and my passion for engineering, I started doing my own research.  I noticed big gaps in what was being offered and saw lost opportunities at several key stages.  Rather than complain, I decided to do something about it and set up Ambionics. 

      (Above) Dressing change at Alder Hey Children's Hospital post-amputation
      We deliver a totally new kind of online service and are currently developing unique functional prosthetic solutions (including our world famous hydraulic technology) for children with upper limb differences everywhere.    
      Our first press release (March 1 this year) went viral.  The response was truly out of this world and our story was covered in every Country and in every language. Most of the media attention centred on the hydraulic prototype we are working on. 
      It's inspired by the way spiders use fluid to move their legs (to find out more please follow the press links below). However, there is much more to Ambionics besides this.  Let me explain...
       
      Early Intervention

      Children are usually given their first prosthetic arm between 6 and 12 months of age. We introduce prosthetics much sooner - one month after an amputation (as in the case of my son) or from the moment a child with a limb difference arrives home from hospital.  The director for innovation at NHS Wales described our research based approach as ‘potentially revolutionary’. 
       
      Replace casting with scanning

      Normally parents must take time off work to attend appointments at specialist centres which might be hundreds of miles away from where they live.  A prosthetist then creates a plaster cast mould of the affected arm and this is used to make a crude socket.  Young children often find this stressful.  They can wriggle and resist when the cast is taken and any sudden jerk can result in a poor fitting socket and a poor first experience of prosthetics. 
      At Ambionics, parents simply scan their child’s arm while they are asleep then upload the file to our online platform. We do the rest and deliver the prosthetic through the postal service! Simple! It takes about five minutes to do the scan and 40 minutes for us to model a socket. It’s worth noting that within two years all phones and hand held devices will come with a scanning application built in.

      (above) The first 3D printed prototype, April 2016
       
      5 Day Turn Around (compared to 6 - 11 weeks)

      A traditional prosthetic can take as long as 11 weeks to make. 
      From a fresh scan, we can produce a new arm within a matter of hours
       
      Backup Copies

      If a traditional prosthetic is misplaced or damaged it can take five weeks to get an appointment for a re-mould, and another 11 weeks before the replacement arm arrives (that’s four months without an arm!).  At Ambionics we just print another from the digital copy we keep.
       
      Reduced Waste

      Traditional prosthetics are discarded after use.  To help keep costs down and reduce our carbon footprint, Ambionics only replace parts that need replacing or upgrading – this is usually just the detachable socket.   
       
      Managing Growth Rates

      Traditionally, children receive two arms per year (based on NHS service) which means that for a lot of the time the socket is either too tight or too loose.  Plaster cast arms are designed to be slightly oversized so children can grow into them. This is a false economy in our opinion because loose or unsecure arms and ones that are too tight don’t inspire confidence. It’s easy to see why so many children stop wearing them. We recommend at least four or five sockets per year depending on the needs of the child.   
       
      Making Devices More Accessible

      In most cases, cosmetic arms are made of fibre glass coated in varnish with a functionless silicone hand (often described as creepy looking).  These are surprisingly expensive for what they are! In the US, a cosmetic arm can cost as much as $5,000!  Our knowledge of 3D printing and scanning has the potential to seriously reduce these costs, making prosthetics accessible to children everywhere (and anywhere!)
      We also believe in customising the look of the hand.  We want to help break the stigma of 'cosmetic' prosthetic devices by offering bold colours and a choice of designs for infants. 
      We even encourage older children to take part in the design process.  What better way to meet a young person's needs than to enable them to produce their own assistive devices and accessories!
       
    • By arc_lich
      Hi, this is project of my friend, she is a talented artist.
      I`ll be glad for your help to make this project to life.
       
      Kickstarter

    • By Knight of the Dinner Table
      That company is quite busy on Kickstarter, always nice miniatures with a certain character. The idea of getting one miniature in standing and "sleeping" / "dead" position is unique I think ... though I don't know if it's useful. On the other hand, a couple of sleeping halflings might go well with my hafling village ...
    • By Smokestack
       
      This project is designed to fund the production of a plastic injection mold, which will enable us to mass produce 32mm fantasy table top fauns.  
      Summary
      After rgdgaming's first initial production runs with the Ghoul King and the Minotaur Brute, we wanted to create our first ten man box set, featuring our faun renders in plastic. 
      Our goal is to provide a ten man box set so players have the option to field tribal archers, javelin throwers, and miscellaneous warriors using fauns.  
      Initial Sketches of Fauns Based off our sketches, our renderer proposed that we use a 3 in 1 pose for the torso, which allows the faun to be armed with a bow, a javelin, or a sword and shield. We initially played with the idea of rocks underneath, but for the convenience of the player we eliminated them. We loosely based the fauns off the idea of thracians, whom were valued for their skirmish warfare. 
      Faun  
      Faun without Rock The project was promising, but we knew that modelers would eventually want a variety of options to choose from. We started with some different heads and a female counterpart. This led to some sketches below. 
      Faun Add Ons Females are sorely under represented in many tribal type armies, so we tried to combine huntress concepts, such as the cloth along the thighs, longer hair, and agile frame. We are looking for multiple head types to go with the torso, and a new female torso to match the male counterpart and weapons
      Proposal for the Sprue
      We have been given multiple quotes for the .CAD design and we have two options: a simple sprue featuring two torsos, with all the options for bow, javelins, shield, heads and accessories for around $200-$300 designed, or we can try one sprue with ten times the amount of accessories for around 2k. The larger we make the design, the more we have to account for the mold design. One sprue with ten models would be ideal. 
      Who are We Making These For?
      The faun box set is intended to offer Kings of War players the ability to field tribal archers and javelin throwers for their Herd army. Though the other is the apparent lack of faun miniatures on the market.
      We wanted to open up an opportunity later for a new box set, which would allow the fauns to adapt the thracian Rhomphaia, the miniature version of the deadly falx. With the lack of armor they would make an ideal spirit walker. Put this together, and you have an incredible table top army in the works. 
      How are These Being Made?
      When weighing resin vs plastic we had to pick and choose the option that allows us to provide a great model set at a price that people appreciate. Resin is cheaper to make a mold for, but costs several times more material wise than ABS plastic for example. So we decided to shoot for an injection mold.
      Injection molds allow machines to make plastic impressions at a rate that is far faster than resin casting. As a result, it is far less labor intensive. This makes it relatively cheap to use no matter which country you enlist to make the product
      To design the mold blue print, we are enlisting a .cad designer from http://camppixel.com/. To make the injection mold and miniatures, we are working with http://www.kamings.com/ (has done work with previous kickstarters, and work for our minotaurs) A professional renderer and 3D sculptor.  To avoid wasting the funds on a bad mold, we will be testing the .cad design with a rapid prototype in the US, giving us a good clue to the viability of the sprue. From here we can refine the mold. 
      What Do We Need? 
      $2900-$4000 for the mold
      $200-$2000 for the .cad design
      $500-$800 for the option of extra bits, heads, and torsos
      Cost of materials and shipping of the product will be handled by RGD GAMING LLC to satisfy the minimum order needed to make this project happen. 
      What Do You Get?
      For a $1 or $5 contribution
      Personal credit will be given in this products production 
      For a $25 contribution 
      1 10 Model Faun Box Set (Retail SRP 34.99) (separate shipping and handling applies).
      For a $50 contribution
      3, 10 Model Faun Box Set (separate shipping and handling applies). 
      For a $100 Contribution
      6, 10 model Faun box set (separate shipping and handling applies).
      Availability of Shipping
      If we can mail it, we will try for you, whether you are in Canada, or Cambodia. Do note that postal performance varies from country to country and tracking may not be available for lower end shipping. Customs may be required. 
      Mainland US and territories $6
      Canada $16
      Europe and rest of the world 
      Per Quote
      Timeline
      A realistic estimate is somewhere between 4-6 months. We have cut down the time it takes with our initial renders, but we have to take into account production time of models, changes, and revisions of the mold. There will also be the communications and forwarding of shipments. 
        Risks and challenges
      Our biggest challenge is funding the initial plastic injection mold for this project. Plastic injection molds are cheaper than steel molds but offer comparable precision, is ideal for mass production, and pairs well with plastic models. Resin offers cheaper molding opportunities, but is not ideal on a cost per model basis.
      What we have done to make this project relatively easy is carefully vetting companies and partners for quality. As a result, we have many of the crucial elements a wargaming company needs.
      A concept artist
      A professional 3D sculptor (for the renders)
      A .CAD designer (blue print for the mold)
      A production company who can make the injection mold and produce the miniatures
      Initial renders and sketches paid for in advance
      Most importantly, a retail company who is dedicated to timely results
      To insure funds for the mold are not squandered, we will be prototyping the .cad files with local production companies, before green lighting the injection mold. The process is cheap and offers a quick turn around (5-7 days).
      We estimate the project will take 4-6 months to allow time for the design and production of the mold, add ons for the miniature sprue and shipping from mainland china to the US. From here we can label and ship products from the United States. A lot of the time will be cut down because of the initial time and investment we have already committed toward the faun project.
  • Who's Online   30 Members, 2 Anonymous, 0 Guests (See full list)