Recently Browsing 0 members
No registered users viewing this page.
Hello every body, this will be here not to show off anything amazing or impressive. Just something that took me five and a half hours to do. Nothing to impressive or anything like that. Its a fairly simple paint job for this old miniature. It has been sitting on my portable painting desk for many years now, and I felt like it was time to finally paint it. So I could use it in Dungeons and Dragons if I ever played a Dwarf again or just to use in anything with Dwarves in it really. With the new system of being able to upload photos straight to here from a device, it may be a little weird. I have never used the new Reaper system for photos so lets see how it works. I will still be explaining everything to the best of my ability. All of the paints i used besides one were all Reaper Paints. So, lets get started.
Okay, so these four photos are of the Dwarf miniature as a whole. I had to paint over the entire mini with black because it had taken some damage to the prime that covers it. After i had painted the entire thing I let it dry and took the pictures so I wouldn't forget to take them.
Next I painted on the metallic colors that i knew i was going to do and I could see. This included the small amount of Chain mail showing under his massive beard, the large Warhammer and his shiled. These were done first in Shadowed Steel. Then I did the few detail pieces that I wanted in Antique Gold. After I painted those few things I realized that I hadn't painted the Rune Stone he is standing on. So I quickly mixed up a wash of the color... well Stone. I forget who the Stone wash is made by but I added some water and I think Glaze Medium. Chaoshead will yell at me in the comments to tell me i'm wrong since i was using most of his paints. Anyways, I did a couple of coats of the Stone wash and moved on to let that dry for a while.
While I was letting the Stone wash dry I went on to other colors. I pulled the Rainy Grey out to do the fur that lines the inside of his cape, not realizing I had missed some it will show up later. This step was fairly easy when I was painting it on, but then again the entire thing to me seemed easy and I don't really know why.
After the inside of the cape i moved on wards and started to paint Leather. I used Ruddy Leather for anything leather on the Miniature. I started with the gloves then moved on afterwards.
Alright, in these few photos I painted more leather onto his sleeves, belt pouch, boots and the bottom of his Chain mail shirt. This step frustrated me because I accidentally painted over some of the metal, so I had to go back and paint the metallics again. I then moved on to some detail work that may have taken the most time to do... I think.
On the Rune Stone, I used Breonne Blue to add some color to the... Stone. XD I wanted to paint the runes from the beginning of this small project. I think the Breonne was a good choice for the runes in the first place.
Here I had finally painted his massive beard. I used Mahogany Brown for his beard since it was the only one within my small amount of paints that would work. I liked my choice of color for his beard though.
In these three i painted the trim of the cape with the Ruddy Leather. I painted it very carefully to make sure I didn't get any on anything else. I already had to repaint Metallic colors earlier and i didn't want to do it again.
Continuing with the cape i painted it Leaf Green and had to do it a couple of times to make sure it was one solid color.
Painted the face with Tanned Skin and then used Grass Green to paint his eyes. Again this is all just a super simple paint job for this mini and is just meant to be a good, fun, little thing I like to do.
As a final thing to finish this Miniature off was a nice little touch that I thought of last second. I painted the small heart on his cape with Blood Red.
The Dwarf is done! He is done in all of the simplest ways to paint that I know how. XD If you all enjoyed and have some tips or anything to leave for myself. Please leave a comment and i guess stay tuned to here or another one I post in the future.
My son and I have been on a journey over the last nine months to play a campaign of Gorkamorka. Why so long you ask? Well, we decided that we really wanted to do it right and build terrain and mobs and vehicles from scratch. Sure we could have just played with some of the terrain I already had and lord knows I have enough orks to play a game, or thirty, of gomo but we wanted something to do together.
We started by building a massive amount of terrain, WAY more than we could ever use on even four tables of gomo but we wanted variety and versatility. That thread can be found here, very pic heavy.
After that was finished we started building mobs and playing games to get the rules down before we really start our campaign with our gaming group. I have been starting project logs for a few of them, here are the Diggas where I built their trukk and the mob itself. I have started painting them here but had to briefly put them on hold to build another mob for a test game coming up soon. That trukk and mob build can be found here, they are the Goffs and they are proud of it.
This is probably our twelfth game or so, we are really starting to get the rules down and games are much quicker than our first couple. It had been a solid twelve or more years since I had played a game but once we started most of the rules came right back. This game took us less than an hour total, that was from table set up to post game book keeping. Granted this was a very quick and non bloody game so that helped quite a bit.
Alright, here we go...3...2...1....
The dessert spread out far and wide before Gorbad and crew as they hurtled across the sand in their brand new trukk, it had only been crashed once before the meks sold it to him for only twenty teef. Pretty good deal since the mek had originally said he couldn't sell it for less than twenty-two. Gorbad smiled to himself, he had some hagglin' skills to rival a Deathskull, that was for sure. Sweat rolled into his eyes causing him to snap back to the moment as he wiped the sting from his eyes and the sand from his face. Overhead the sun beat down as relentlessly as ever, it was early day but the temp was already climbing to almost unbearable even for an ork such as himself. There was never a moment of respite on this world he thought. All the hardship,fighting and scraping was good for his lads though, gave them something to do and kept the yoofs out of trouble.
Gorbad was snapped back to reality again as Grimgut, the new spanner and driver of the new trukk, was screaming something that he couldn't hear over the roar of the centrally mounted engine. Grimgut was now frantically pointing in the direction they were headed.
Before Gorbad could turn to see what was out there Snazbad, the new yoof of the mob, was frantically tugging on his arm.
"Wat!?!" bellowed Gorbad at the light green yoof.
"Boss, I seez somethin'!", Snazbad was also pointing in the direction they were headed.
Sneering at the yoof but holding off from smackin' him across the back of his skull for fear of finding a soft spot Gorbad was finally able to turn his attention to the desert in front of them.
A large ramp down into the skid could be seen and right at the bottom of it, some no good stinkin' Freebootas!
A smile crept onto Gorbad's face, "Hit the Red Button! he screamed at Grimgut.
The trukk bounced across the rough desert ground and all the boyz roared in their excitement.
(Here are a couple shots of the terrain we are playing over before anything was deployed.)
(Here are the forces deployed.)
Those git Freebootas was caught out in da desert diggin' scrap like a bunch a grots thought Gorbad, his smile gettin' bigger, and more full of sand by the second.
The thunderous roar of his new trukk and boyz musta scared them no good Freebootas, before Gorbad and 'is boyz could get to 'em and give 'em a good whoopin' they was in they trukk and tryin' ta get away. Their good for nothin' bad mek was behind the controls of the vehicle and hittin' the Big Red Button before he even had the gas engine started! Their vehicle lurched ahead straight toward The Last Rock forcing their mek to slam on the breaks.
Gorbad was yellin' for Grimgut to t-bone them but somehow over the roar of the engine his message was lost and the new spanner skid stopped the trukk sideways, headed straight for the side of the cliff.
Both mobs crammed to the sides of their trukks facing the other mob and let loose with every ranged weapon they could bring to bare.
The bad mek, still without his gas engine started, was smooshing the Big Red Button nonstop! In an amazing turn of luck all this accomplished was that the low ridin' git wagon spun 'round and faced almost straight at the center of a large dune of soft sand.
Gorbad saw that this was the moment he needed and once again he yelled for Grimgut to ram the stinkin' Freebootas while they were in a bad position.
The spanner must have heard this time as he skillfully turned the new trukk 'round the right way and Gorbad could hear the thrusters begin to whine up, the vehicle lurched forward and then stopped.
Gorbad, once again, whirled to see what the new spanner was doin' only to see him pulling out a hammer and beatin' on the Red Button....he must not be strong enough to push it he thought. He ducked just in time as he saw Zogstruk, the new gunner of the new trukk, fire the harpoon gun at the enemy. He wrenched his head around just in time to see the massive harpoon glance off the engine and stick in the sand.
Then the roar of weapon fire was deafening as once more both mobs opened fire with everything they could.
Gorbad's heart jumped in his chest as he saw the Kaptin' fall face first from their low ridin' trukk.
His joy didn't last any longer than a few quick heartbeats as the tough old git crawled back into da trukk, the bad mek started his gas engine and tore off across the desert, followed by blasts from their thrusters taking them almost out of range to even think about chasing after them.
Gorbad screamed at Grimgut to give her everything she had and catch up to them before they were too far away.
The spanner revved the gas engine, threw it into gear, spun the vehicle around to give chase and mashed the Red Button only to loose control and skid to a stop facing the cliff and a tank trap.
Gorbad watched as the no good Freebootin' gits sped off out of sight with a trukk full of scrap....
Needless to say, I(Gorbad and the goffs) did not win this one. My son did exactly what he had to do to win, get off the table with the most scrap, and win he did. It was a fun, funny, orky game, full of awesomely horrible dice rolls for both of us. However, in a game like this sometimes that will actually make for a much more entertaining game.
Gorbad, his back against the side of the armored crew compartment, slid down until his bottom was on the bed of his new trukk. He began fumblin' through his cigar pouch searching for the only thing that may help him feel a little better about his life choices at the moment. At last he found it, the last stump of his last cigar. He brought it to his mouth and began searchin' for his lighter in his chest pocket. He found it, quickly pulled it out, struck it and nothing happened. Gorbad looked at the heavy, metal lighter and saw that it had caught a bullet, at least he could rely on someone in his mob he thought before he roared and threw it at Snazbad, hitting him behind his right ear. The yoof crumpled like a grot under a slavers whip.
Gorbad and the other boyz roared in laughter.
Hope you enjoyed it as much as we did...
This is another mob build for our games of Gorkamorka. This one is a more traditional mob made of orks and vehicles, no grots allowed.
Goffs are pretty straightforward, even for orks. They don't go for subterfuge, most of them don't even know what that means let alone understand the concept or why you would want to fight that way. They are the epitome of orkiness, believing that might is right, that the biggest and toughest should run the show and that arguing the point will just get ya a fat lip with a few less teef behind it. Now all orks view life this way to an extent but the goffs live it. Hand to hand, usually to the death, is their favorite way of settling any sort of dispute. While they understand there is a need for longer ranged combat it is viewed more as a sort of crippling or distracting tactic used to let the goffs get close enough to get stuck in.
Understanding this about them I wanted their trukk to be a sort of ork delivery system. I decided that the ork crew should be right at the front of the vehicle for easy disembarkation into hand to hand. In game there will be no different rules for the trukk but will look truly proppa for goffs.
I had a rough idea how I was going to make this work but as usual I just jumped in without blueprints and started the build. As per the directions the tires and frame are assembled first but this is where the standard trukk stops, I even went with a third party engine.
As with most of my trukks I removed the middle suspension and cleaned up the frame.
This made the perfect place for the engine to sit centrally on the frame.
This made the distance between engine and rear axle super short so I had to cut down the drive shaft to almost nothing.
I ended up cutting even more out of the drive shaft to finally make a fit.
This set the rear axle at a strange angle but with the tires in place you can't tell.
Moving to the front axle now to make sure everything sits at an angle that still makes the trukk look like a hotrod I was fairly certain I was not going to be able to use the axle as is out of the box. Setting it in place proved this to be the case as the front of the trukk was actually higher than the rear end, with the tires in place this would have made it pretty much level. Not really acceptable for this trukk.
Looking at the front axle I could see that just flipping it over may work, which would be great as it would mean an easier fix than trying to rebuild a cut up axle. This had the trukk sitting pretty much level which means with the tires on would leave the rear end jacked up as I wanted.
Alright, with the trukk sitting pretty much as I wanted I could move back to the engine. I needed to set the radiator somewhere and decided to just try to sit it right in front of the engine. This actually worked pretty well with just some very minor removal of some rivets off the frame and some bending of the radiator hose.
I needed to attach the nitrous tank somewhere but this engine has no flat places for any sort of attachment.....what better place than to just have it dump into the fuel tank!
Next up was the exhaust, the right side was perfect for the stock pipes, the left side not so much so.
The problem here is that the pipe is in the way of the tire being able to sit right on the axle.
I had originally thought I would be able to run it just behind and above the tire to come out the rear end like this.
Which would have been cool had it worked. Now I am considering something more like this.
The problem with this is that I was worried that it would be in the way of the central cockpit that I was thinking of building for the driver. In the end I went with this instead.
With this settled I moved on to the construction of the cockpit. I started by cutting the front of the cockpit piece from the trukk kit up into the larger pieces, getting rid of the central connection piece and tracing the shape of the two pieces glued together onto some plasticard. I lost a pic of the front cockpit piece.
It sits nicely onto the frame after cutting all the rivets and bolt heads off and adding a spacer to each of four plates on the frame to give just the slightest bit more height, mostly so the driver could see over the engine.
Time to start adding some of the driver controls to the cockpit. The steering column and the floor mounted gear selector were fitted with the help of the driver.
A rear panel, a windscreen and side roll bars added to get the feel of the cockpit. The driver is not glued and won't be as they need to be removable for game purposes.
I realized at this point that I have no where to put a gunner, I didn't want to put him in the front crew compartment with the rest of the boyz.as he would take up enough space for two boyz that way. Giving some thought to this I decided that using the rear of the drivers cockpit was the only option at this point. More thought and some time playing with some bits I actually found a use for the mostly standard gunners turret of the trukk kit. Playing with this piece and some tubing I created a sort of rear turret that I got involved in the build deep enough to not take pictures of the process. I may need to reinforce this as it just sort of hangs off the back end and is only attached by the pipe frame and the front of the turret plate.
Moving on to the front of the trukk and the crew compartment made me realize that it would have to be a multi level deck with a lower central area sitting on the frame and raised areas over the wheels. I wanted the deck to be long enough and wide enough to be able to hold six to eight orks, With the 25mm bases and the wide orks this meant that the deck needed to be roughly three inches by three inches. With that in mind I cut the central piece to get a feel for how this would look on the frame.
While this appears very long it actually puts the total length of the vehicle at just two inches longer than the digga trukk, which is roughly one inch longer than the standard build of the trukk. At this point I got into the build and forgot that I even had a camera nearby. Here is the final overall shape of the vehicle with some minor details started.
Comparison shots with the digga trukk. Same width and just slightly longer.
The big shoota/weapon connection sorted and magnetized. The gunner is not glued in place as removal may be needed during the game.
A bull skull with big horns is the goff clan symbol so of course the trukk needed one. If I can find a larger one I'll switch it out in a heartbeat.
That is where I left this yesterday and all it needs now is rivets and some plating here and there to look more ramshackle and proppa.
The boyz and nobz will be built after I get the trukk finished. Oh yes, that is another big difference the goffs have to other mobs, they can have two additional nobz in the mob. Other ork clanz can have only a single nob to lead them into battle.
Well, hope you guys enjoy my mad mek workshops as much as I do.
Until next time.
So, in order to play Gorkamorka we need some mobs. The first of these that I decided to build was the Diggas.
The Diggas are humans that think the orks are the greatest thing they have seen and they strive to be just like the orks. This being the case the Diggas trade and fight with and as the orks. They use ork armor and weapons, ork vehicles are also used since the Diggas have very little in the way of technical skills, either to build or maintain such tech, vehicles or otherwise. They rely on the orks for almost all of their tech, making the orks seem even more god-like.
First off here are the two Diggas that I have converted so far, a shaman on the left and a Digganob on the right. There will eventually be more of these but for now this is all I have bits for, more of what I need is on order and should be here soonish.
Next up I wanted to convert the Digga trukk to not be the standard kit right out of the box.
Frame straight out of the box.
The standard kit is a six wheeled vehicle, for this build I will be removing the center set of wheels to make more of a standard four wheeled vehicle.
This is a fairly easy process, using clippers and an x-acto I trimmed all of the support structure from the sides and bottom of the frame. It is important to note that you should leave any detail that is on the top of the frame in tact as the bed of the trukk rests on all of that tiny detail.
The standard six wheeled kit has two rear axles and driveshafts, I will not need the center axle or the two short drive shafts, I will need to build my own driveshaft to make this work.
I'll use just some plastic rod for the driveshaft and use the ends of one of the original driveshafts.
So, with that set aside to dry I moved on to the bed of the trukk. This is the standard trukk bed build, here being held together by poster tack.
I am not a big fan of this tiny trukk bed as it will only hold four or five minis, hardly enough for a real mob.
I plan on widening the bed to comfortably hold six, this could easily be pushed to ten with no problem. I will use some of the original trukk bed bits to do this as well as plasticard.
Simply flipping the sides of the trukk bed to the opposite sides and laying them flat creates a nice flat surface that is very easily glued together.
I used plasticard to fill out the rest of the bed so that it was all roughly the same width.
For the sides I decided to use sides from an ork chariot, leaving the banner poles on to use later.
I used plastic rod to make matching poles in the front of the trukk bed.
I needed a rail all the way around the top to hold a canopy later in the build process. I used plastic rod and some corner pieces from some of the roll bars from the trukk kit to make this.
Leaving that aside to dry for a bit I moved onto the cockpit of the trukk. I forgot to take pics of all the bits that SHOULD have been used in this step but I didn't use all of them that is for sure. I also forgot to take pics of the steps to get to this point but it was pretty straightforward, just followed the directions for this step actually. I did scavenge a second wind screen out of the bits box but I am not sure it will stay as I am not entirely sure I like it.
The next step is a little bit of detailing of the original kit, mostly the engine and additional cockpit details for the gunner, not used in this build because it is an ork and this is a 'umie vehicle. Here are all the bits for this step.
And here is what I will be using.
To make this stuff look better.
Next step bits.
Only bits I will use from this step.
I forgot to take pics of that step or me adding bars for the drivers canopy.
The next step is just about the important bits used for boarding and krumping enemy vehicles. These are all the bits to add boarding planks and a wrecking ball as well as a few bits not used for Gomo and some braggin' decorations. I will add these to this vehicle but they need to be magnetized as they are not always available.
All the bits not used in this build.
Here is the Digga trukk as it stands now next to a mostly standard build trukk.
This was a surprisingly quick and easy build, I was able to finish the vast majority of this in about five hours. With just more detailing left on this it will probably take longer to complete it than I have already put into it.
Hope someone finds this useful or entertaining.
Who's Online 38 Members, 3 Anonymous, 0 Guests (See full list)
- Grumpy Cave Bear
- Dilvish the Deliverer
- Green Eyed Monster
- Cranky Dog
- Chris Palmer
- Balgin Stondraeg
- Adept Legacy
- Froggy the Great
- Sophie was taken
- Xiwo Xerase