Recently Browsing 0 members
No registered users viewing this page.
Hi friends! We have another project to share with you in our continuing series where Buglips and I paint the same figure using our own very different from each other approaches to miniature painting. If you're not familiar with this series, you can check out our previous topics:
03100: Thanis the Bonecaller
01614: Con Crud 2017 Convention Zombie
02818: Bugbear Warrior
For this project, we decided to paint Scorpius Rex Dracus, which is an older figure in the back catalog of Reaper - just look at the number! 02017! He's one of the OG's of the Reaper catalog! Our usual method for picking a figure is generally that one of us already owns it and suggests it and then the other of us goes and orders it. However, for Scorpius Rex Dracus, we actually both already owned him because he's a really neat figure with a lot of personality.
I know a lot of people are a bit intimidated by the thought of painting dragons, but I promise they're a lot of fun and this guy would actually be a great starter dragon, as he's on the smaller side. I didn't have a Sir Forscale, but here he is next to Queen Illeosa of Korvosa to give you an idea of his size.
So you can see, he's a far less intimidating size than the dragons you see in Bones. (Spoiler alert, I'm going to assemble him a little later. )
But for now, here he is straight out of the blister:
As we've done with our previous WIP posts, I will be tackling this guy with my method of painting for display and I'll do my best to take y'all through all of the steps that I go through from start to finish and share my thoughts with you as I go along.
As always, please feel free to comment or ask questions - I'm always glad to help out in whatever way I can along the way. I'll try not to take too many blurry pictures....but no promises.
I'm starting to get lost here, so I figured I'd make an index of stuff I've posted. Many of these are loaded with enough pics and text that they're almost mini-tutorials. Questions and comments are always welcome. If you don't get a reply within a couple days, find me on Facebook, or add me on Battle.net (Xumenicus#1118).
ReaperCon Final Photos
2016: https://reapercon.com/mspopen/2016/artist/Joshua Anaya
2015: https://reapercon.com/mspopen/2015/artist/Joshua Anaya
Massive Voodoo Water Base (No Minis)
Pathfinder Seoni Bust (ReaperCon 2016 Open Gold)
Dagon's Emissary (ReaperCon 2016 Diorama Silver)
Grudge Power Armor Bust (ReaperCon 2015 Open Gold, Bronze Sophie)
Dark Sword Mole Alchemist Diorama (ReaperCon 2015 Diorama Gold)
Ork Timberwolf Vehicle (WiP)
14479: Dryad (Heavily adminned because she's female. Haven't gotten around to fixing.) (WiP)
Power Armored Dwarves (WiP, and possibly forgotten and/or lost)
Caddisfly Larva (Fishing)
Completely Failed Tower Implosion Diorama (Dead)
Me hijacking somebody else's thread, and using it to track conventions in Colorado
Standby for massive dump in 3... 2... 1...
Chopping this up into a few pieces for easy posting/consumption.
Where I've been: Video games (Xumenicus#1118, if you're on Battle.net), bought a new house, running a fly fishing tournament for a treehugger non-profit, part-running my treehugger fly fishing non-profit local chapter, some other random stuff, and yeah -- here we are. I promise to paint more. Seriously. I just need to paint and sculpt more. I also need to fish more. And game more.
I guess this is a thing: Apparently, I need deadlines in order to get anything done. This time around, since I couldn't make it to RC2017 (travel budget blown on BlizzCon), I aimed for a couple different challenges over at Massive Voodoo: http://massivevoodoo.blogspot.com/2017/07/mv-challenge-2017.html
Objective: Make a water-themed base. No central miniature, no real focus -- just a base. And it has to be mostly water.
Disclaimer: I'm not at all confident, or consider myself proficient with clear resin. I wasn't sure how good/bad/terrible this piece would turn out, so I didn't spend days painting this. It's got a few rough layers of highlights, a few rough layers of shadows, and basically I just wanted to turn something in, have fun doing it, and not stress about being good enough to win. The MV crowd is amazing -- I was just trying to get closer to touching the sun. :)
Supply List: Wood, coping saw, cyano super glue, wire, green stuff, sculpting tools, paint, brushes, old brushes, Ease Release 200 Mold Release Agent, plastic Solo cups, nitrile gloves, popsicles sticks (fox mixing resin), Castin' Craft® Clear Polyester Casting Resin, small sheet of plasticard, duct tape, Tree House Studio Clear Acrylic High Gloss Coating spray, sandpaper (100, 200, 400, 600, 1000 grit), Woodland Scenics Lichen, Woodland Scenics Water Effects, fly tying thread, level for leveling the curing area
I did a few sketches one night so I could figure out what to do, and this is where I ended up. I thought about doing a waterfall, or something cooler, but I was kind of in a time crunch, and only had 3 weeks, especially since things are still calming down from moving.
Picked out a piece of wood from my scrap pile...
Went to work with a coping saw until I had a pleasing, interesting shape...
Learning from past mistakes with trying to get green stuff to adhere to wood, I opted to seal the wood this time. I used cyano, and 2 old brushes. It actually works really well as a wood sealer ( http://www.woodworkersjournal.com/cyanoacrylate-everything-you-need-to-know/ ), but you need to be extra careful due to the amount being used -- more of a chance to glue yourself to something, glue to project to something, and the fumes will sneak up on you real quick, and burn your eyes or nose. Fair warning. Be careful.
I opted to use green stuff for the project. That's where my comfort zone still is, even though I'm trying to work more with Beesputty and ZBrush. The bit of twisted copper wire there is to support an additional column. Do an image search for "limestone underwater caves", and you'll see where I'm going with this.
A little more...
Starting the tree. Do a search on "limestone cliffs trees roots", and you'll see where I'm headed even more.
So for those that pay the least bit of attention to what I paint, you may have noticed that I paint mostly Ral Partha figures, which is a brand I really do enjoy quite a lot. I've been painting figures for their online catalogue for a number of years, and I just recently tried my hand at my first little tutorial, which was posted over at their site. If you are at all curious, you could find it here:
It is by no means the end-all, be-all of painting eyes, but just shows the way I typically approach painting eyes with four recent examples of figures that I've done. I think it almost feels like a WIP for four different figures. So anyways, have a look, hope you enjoy it, and hopefully somebody somewhere can get a little bit of eye-painting inspiration!
Who's Online 10 Members, 1 Anonymous, 0 Guests (See full list)