Jump to content

  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Chaoswolf
      This is an old Mage Knight figure that I slightly converted and repainted. He was holding a comically undersized flail in his left hand, so I cut it off and replaced it with a halberd from an old GW Chaos Warrior I had in my bits box. After that, it was just a matter of repainting him for use on the tabletop. He'll make an interesting BBEG in some game I haven't created yet.
       

       

       

       
      Thanks for looking.
       
       
    • By Chaoswolf
      These are 3 little imps/demons that I pulled off the melt table at Reapercon last year. I'm not sure of manufacturer, so if you recognize them, please let me know. I think they may be from a 15mm figure range.
       
      I bashed these guys out over he course of a couple evenings about a week ago. Thanks for looking.
       

       
      With (in need of a touch up) Sir Forscale:

    • By Maledrakh
      “Off to off the wizard”
      The figures are from Reaper Bones KS3, “Chronoscope Wild West Oz”.  Since they all were armed, I see this as a sort of hit squad, hence the title.
      I based them on 30mm round display bases from Reaper, and I 3d Printed a 20mm round in a similar style for Toto.
      Since not only the Tin Man, but also the flying monkey are obvious metal robots, I think “Weird West Oz” or even “Steampunk Oz” would be a more fitting moniker.
       
      The miniatures are made in the slightly harder Bonesium, henceforth to be known as Better Bones™. Since the third Bones kickstarter, all Chronoscope Bones are coloured grey,
      The Flying Monkey, Lion, Tin Man and Scarecrow are sculpted by Bob Ridolfi, with Dorothy and Toto by Julie Guthrie. Only the Scarecrow seems to be released in Bones as of yet.
       
       
       
    • By Maledrakh
      This set was delivered as part of the third Bones kickstarter campaign, but is not sold by Reaper. There seems to be no mention of it here on the Reapermini-site at all, which I find a bit strange. It does not appear in any search I have tried. However, it is to be found on the Victoria Miniatures site, so I assume it was only made by Reaper for Victoria Miniatures and not as a joint product even though it was in the Bones KS.
       
      That aside,
       
      IT'S SLEDGEHAMMER TIME!
       

       
      I have not actually painted any large vehicles or similar kits like this in a very long time, and have never really tried my hand at weathering or any of that lark. So the results are not all that either. In hindsight, I think I should have done the piece in a different color more consistent with the uniforms I ended up doing, maybe added some camo netting or something. Also I probably should have looked into how to do weathering properly -I don’t even have a sponge. And maybe I should get my airbrush up and running again. Oh well.  It is perfectly servicable for the tabletop.
       

       

       

       

       

       

       
      the backside pictures all turned out too blurry to be usable.
       
      The gun and carriage are in hard polystyrene HIPS plastic, and quite straight forward to build. Parts fit together fine with little or no flash to speak of.
      The crew are in bones material, and the rubbery type at that. Only the wrench and the rangefinger piece needed the hot water treatment to straighten anything out. All (apart from the range finder part) are one piece, with tabs beneath their feet to fit seperate slotted 25mm round bases in a similar style to 40k. There is also a large oval base for the piece, but I did not use that here.
      The tabs needed slight trimming to fit the slots in the bases. Apart from this the minis only had very slight mould lines, which can be ignored unless they, like for me, trigger your OCD and need to go. I carve them off with a sharp scalpel.
       
      The range finder-piece was completely wonky even after boiling, and I ended up having to drill through it and insert a pin to get it to be something approaching straight, The crew are slightly smaller than similar models from the Imperial Guard, sorry, Astra Militarum from Warhammer 40k which this model clearly is meant for.
       
  • Who's Online   24 Members, 5 Anonymous, 0 Guests (See full list)

×