Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoticons maximum are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Maledrakh
       
      The 20 resin heroes from wave 1.5 of the  Shadows of Brimstone kickstarter.  I believe there are 12 or so more resin heroes and companions to come in wave 2.
       
       

       
      A note about the resin used. I see that there is a lot of internet-hate directed towards the resin models, mainly because of the greasy release agent used not being easy to remove, and that many people prefer plastic for ease of gluing and such. I think many of the complainers are boardgamers more than miniature modellists, which I certainly can see these models posing problems.
      My experience was that with a good scrub in warm soapy water, most of the release agent went away.
      A few of the models needed an extra coat of primer here and there, as I had not gotten the release grease properly off everywhere, but with that extra coat on I have had no problems. In this they are not really any worse than other resin models I have worked on.
      One problem was that many of the parts were small, and had very small gluing surfaces (e.g. wrists to arms) but I got them stuck together by using activator spray on the  superglue to make it bond quickly. Luckily the resin is lightweight, so gluing a small joint is actually enough to hold the part. (Many of these would not have worked with metal miniatures!)
      I avoided the small feet being small gluing surfaces altogether by using the vent-sprue bits still attached to the feet of the models as pins to fix them to the bases by drilling matching holes in the bases and cutting the vents to size instead of all the way off.
       
    • By Chaoswolf
      This is a giant frog from Mega Minis (you can't get it from there any more, though. He sold the molds to another company; I'm not sure who) that I have painted up as an Ice Toad for use in FrostGrave games.
      Also part of my Morihalda Challenge.
       

       

    • By Chaoswolf
      I'm not sure what this is supposed to be; I got it as part of a figure lot on Ebay. Maybe an Otyugh? Maybe something C'thulu-ish? In any case I painted it for the Morihalda Challenge.
       

       

    • By Chaoswolf
      An old Ral Partha lady warrior I painted for the Morihalda Challenge. I'm happy with her eyes (only two tries!), but she seems kinda washed out in the pictures. I need to play with the light box more.
       

       

    • By Chaoswolf
      This is an old wizard figure from the ChainMail game. I'm including him as part of my Morihalda Challenge; he was already painted, but I did some touch ups, and based him. I was having a bad day, but didn't want to break my streak, so I needed something quick and easy.
       
      Still trying to get the hang of playing with my wife's light box; he's a little washed out.
       

       

  • Who's Online   39 Members, 3 Anonymous, 0 Guests (See full list)

×