ladystorm

Live
Reaper Bones 4: Enthusiasm and Commentary Thread

5156 posts in this topic

Hm, I added the expansion and the tree to my pledge manager. Somehow, shipping went down? :blink:

9 people like this

Share this post


Link to post
Share on other sites

Added in the tree. Still on the fence on core and dreadmere. There's just a lot extra I don't want to the point where it would be cheaper to get just what I want from the core and just what I want from dreadmere at retail. But who knows, may end up going all in on both before this is over. I suppose that's why $$ goes drastically up near the end. I'm going to need the box of good will to come by my house after receipt of this Kickstarter if I do end up getting either one of those. Would love to trade minis for basing bits...

11 people like this

Share this post


Link to post
Share on other sites

The only question for me with the tree is how many I will be buying...

11 people like this

Share this post


Link to post
Share on other sites

hmmmm. uncertain about the tree. I do like the little vultures...

4 people like this

Share this post


Link to post
Share on other sites

Anyone who doesn't want the tree of woe should re-contemplate this...on the tree of woe!

9 people like this

Share this post


Link to post
Share on other sites
1 minute ago, Darcstaar said:

Anyone who doesn't want the tree of woe should re-contemplate this...on the tree of woe!

can I just get double wheel of pain instead?

5 people like this

Share this post


Link to post
Share on other sites

Posted (edited)

1 hour ago, Nunae said:

Well, after how many people claimed they needed this tree (or even multiple of it) we should be moving along quite through the weekend. 

1 hour ago, Dr_Automaton said:

"Contemplate this on the Tree of Dispair."

 

I donno.  Doesn't quite have the same ring to it. ::P:

Yah doesnt have the same ring. Fortunately Reaper is saving me money with the last two reveals:) It's great that everyone loves the tree, and thats what Reaper does best, give variety for everyone. For me, I am more just into painting and hardly,if ever game BUT I love painting the minis! So the tree, aside from trying where to display it if I got it, is not something I would use BUT everyone else has great ideas for it. I like the wraiths and High rollers (which is what I am getting NOW), plus before July definitely Rocky and the Core set. Then If budget permits, both statue sets, Chronoscope expac,, trolls (I want that battering Ham), giants, Narglauth, fire giant, extra sets of Wraiths (I need nine right::P:) rocky and high rollers(gift ideas on those two), and if I haven't honked off the family spending all that::(: MAYBE the dreadmere expac (If it gets bigger, then maybe not) and whatever else is left. But definitely want to shoot for everything up to the extras I listed If I can:) YMMV.

 

P.S. Ohh and I just figured out, 3 sets of wraiths will give me nine riders:)

 

Edited by Ratmaster2000
6 people like this

Share this post


Link to post
Share on other sites

Numbers Based on 1800-1900 Reaper time today:
Total Gain Today: $39,382
Total Gain 24 Hours: $50,920
Total to Next Goal: $35,430
New Backers This Hour: 4
Gain in last Hour: $4,256
Current Average Pledge: $116.68
Average Hourly Backers Today: 5.4
Average Hourly Backers 24 Hours: 5.3
Average Hourly Pledges Today: $2,276
Average Hourly Pledges 24 Hours: $2,122
Hours to next goal based on gains this hour: 8.3
Hours to next goal based on 24h Avg: 16.7
   
Current Total Pledges: $1,214,570
Current Total Backers: 10,409
Previous Hour Total Pledges: $1,210,314
Previous Hour Total Backers: 10,405

 

 

Very nice!! I guess people really want that tree!

6 people like this

Share this post


Link to post
Share on other sites

So am I correct, did I hear them say that the chronoscope expansion is done, there will be no more additions? Just trying to figure out what I will budget for and knowing this will help (well budget from here to July 2018 haha).

5 people like this

Share this post


Link to post
Share on other sites

Ooo. I want that tree.

Haven't dared yet to dink with the Pledge Manager, though. Keep hoping more fun things will be revealed.

7 people like this

Share this post


Link to post
Share on other sites

Numbers Based on 1900-2000 Reaper time today:
Total Gain Today: $41,752
Total Gain 24 Hours: $52,280
Total to Next Goal: $33,060
New Backers This Hour: 5
Gain in last Hour: $2,370
Current Average Pledge: $116.86
Average Hourly Backers Today: 5.3
Average Hourly Backers 24 Hours: 5.3
Average Hourly Pledges Today: $2,281
Average Hourly Pledges 24 Hours: $2,178
Hours to next goal based on gains this hour: 13.9
Hours to next goal based on 24h Avg: 15.2
   
Current Total Pledges: $1,216,940
Current Total Backers: 10,414
Previous Hour Total Pledges: $1,214,570
Previous Hour Total Backers: 10,409
4 people like this

Share this post


Link to post
Share on other sites

Oh snap, dat tree doe. I have to get a tree of despair.

7 people like this

Share this post


Link to post
Share on other sites

I do like that tree. I have time to decide yet, but I suspect I will end up with Dreadmere and the tree. Spent a bit extra today on giving my brother and his GF going away/congrats gifts sooo.... I shall wait. 

9 people like this

Share this post


Link to post
Share on other sites
46 minutes ago, Ratmaster2000 said:

So am I correct, did I hear them say that the chronoscope expansion is done, there will be no more additions? Just trying to figure out what I will budget for and knowing this will help (well budget from here to July 2018 haha).

 

 

While I am not an official source, I would say the Chrono. Expansion is complete.  All expansions in past Kickstarters have only had three sub-set additions; and the fact there is no more blank space on that Expansion's graphic is a sure sign.

9 people like this

Share this post


Link to post
Share on other sites

I thought I recall reading a One Boot recap in the official info thread confirming Chronoscope is done.

7 people like this

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SamuraiJack
      About this project
      Welcome to our next Kickstarter project.
      Why this project? We need your help to construct all models ready, this takes a lot of time and is also very costly.
      Why should I support the project? 
      Be the first to receive the files. Some files will be downloadable later in the shop but not all. The packages will be more expensive than here, so save them now and save up to 40%.
      My project shows ships for the different periods /ages. These can be printed on the scales for the different figure sizes from 6 mm to 30 mm (the larger scales could also require larger print areas).
      The models are high quality and highly detailed. You can all models print with ABS or PLA.
      Miniatures and scenery are not inculded.
      There are 7 Pledges:
      Pledge: Longboat:
      Model can printed with our without sail.
      You can place 2 x 2 cannon on it, or you can it use as fisherboat.
      Later regular price in the shop (STL Files): 9,95 € (Save over 50%)  

      Details:
      Pledge: Pinnace
      You can place 2 x 4 cannon on it. It Comes in parts for better printing.
      Later regular price in the shop (STL Files): 14,95 € (Save over 50%)  
      Pledge: Sloop
      You can place 2 x 3 cannon on it, or you can it use as fisherboat.
      It Comes in parts for better printing.
      Later regular price in the shop (STL Files): 14,95 € (Save over 50%)  
      Pledge: Junkboat
      You can place 2 x 3 cannon on it. It Comes in parts for better printing.
      Later regular price in the shop (STL Files): 14,95 € (Save over 50%)  
      Pledge: greek. Triere / roman galley
      It Comes in parts for better printing. With different round shields.
      Later regular price in the shop (STL Files): 17,95 € (Save over 50%)  
      Pledge: Bark
      You can place minimum 2 x 6 cannon on it.
      It comes with different decks and rooms and in parts for better printing.
      Later regular price in the shop (STL Files): 24,95 € (Save over 50%) 
      Pledge: Full Set
      Full Set this set included all models (over 6 ship models) from all the pledges sets. You get all the files from the pledges and the unlocked stretch goals. Plus 2 exclusiv models: 2 different ships (picture comming soon...). This models are exclusiv in Full Set and on Kickstarter:  
      Later regular price in the shop (STL Files):  not available (only here on Kickstarter) 
      Caution: The details of the models are dependent on the scale and the available nozzle of your print.
      Example Scale factor:
      10mm = 66 %
      15mm = 100 %
      20mm = 133 %
      28mm = 166 %
      The Stretch Goals:
      unlocked stretch goal #1: different Bases for your miniatures
      unlocked stretch goal #2: 3 different cannon or ballista for ships - sketch (model may differ)
      unlocked stretch goal #3: 2 different carts
      unlocked stretch goal #4 goods - Barrel, basket & crates - sketch (model may differ)
      locked stretch goal #5 2 chest with gold and without- sketch (model may differ)
    • By SamuraiJack
       
       
      About this project
      HEX is a new kind of dice that merges the best of magic and minimal design to create an all new gaming experience!
      The Ultimate in Minimalist Design
      Each HEX die is machined from two standard 16mm dice blanks. The finished die is placed in an acetone environment to smooth out any ridges or imperfections (note: the prototype is not final and has a visible seam, the real deal will look great, I promise!)
      Features
      21 LED's 16mm Standard Dice Size Ultra-low-power Accelerometer (MMA8491Q) Ultra-low-power Microcontroller (MSP430G2101) 2 LR44 Batteries Leave it to Chance!
      Get skill and psychology out of the way -- there's no way to tell which side is which in HEX mode until the roll is over!
      Two LED Modes
      HEX mode - the die remains blank until the roll has been made, then the result fades into view. Right now I have the opposing side light up too, should that be in the production version?
      Full Color mode - all LEDs activate when the die is shaken and remain on for about 10s after the roll
      LED Color Options
      Based on feedback I am introducing color options! You'll now be able to opt for single color LEDs (all green, all orange, or all red) if you're not too keen on the standard multicolor configuration. You'll be able to choose the desired quantity of each type if you order multiple dice!
      Long lasting performance
      The microcontroller, accelerometer, and battery chemistry were selected for ultra low standby current consumption and will easily last a year of casual gaming and a shelf life of several years. However, avid users may need to replace the batteries every few months due to high LED light use. (Note: the dice may be opened with heat to soften the glue)
      Moving Forward
      Although the current prototype is good, there are some adjustments that I would still like to make before production.
      Keeping the lights in well-defined circles so they don't bleed across the surface of the dice. I plan to accomplish this by using reverse mount LEDs that would shine through holes in the circuit board Optimizing the program logic to ensure glitch-free operation Potentially having the shell of the dice injection molded instead of milled from off-the-shelf dice blanks (this might also allow for a snap fit enclosure for easier battery servicing) Of course, I look forward to incorporating feedback from you all as well!
    • By SamuraiJack
      About this project
       Well... We are back again! With Our 3rd Kickstarter for STL Files! 28mm Sci-fi Buildings and Scenery!
      First up is our main Pledge, For £40 you will receive all of this!
      Stretch Goals!
       
      Missed Our last Kickstarters? 
      For £130 You can get all three Kickstarters!
      28mm Modular Buildings - STL Files - OpenLOCK
       28mm Universal Tile Kickstarter - Modern
       
    • By SamuraiJack
       
       
      About this project
      It's not easy running a team in a violent Fantasy Football league. There's riots when you win, riots when you lose and I'm just talking about the coin-toss. To help you out on match day, we've assembled some of the finest staff in the Old Kingdoms:
       
       
       
       
       
       
       
      Please note that the finished figures will be cast in white metal with trace amounts of lead and as such are not suitable for children. The miniatures will also be supplied unpainted, unless the highest amount is pledged.
      Hopefully this project will be a starting point for a whole new range of accessory figures and maybe even teams but we can't do it without your support. It's a bit soon to start talking about stretch goals but we do have a few ideas up our sleeves that we will hopefully get a chance to present to our wonderful backers!
      Shipping is not included in pledge price, however all postage + packing costs do include insurance for lost parcels.
      All images and figures are the copyright of Northumbrian Painting Services.
    • By SamuraiJack
       
       
      About this project
      Check the comments on this project for sneak peeks, Darklands lore, hints, tactics, painting advice and general insanity! The community that builds during these Kickstarter projects is amazing, and even if you just read the comments, you'll gain so much more from Darklands: Starter Hosts!
      Backing Darklands: Savage Hordes IV is a great opportunity to get into the dark fantasy world of Darklands for the first time, to expand your existing Darklands collection or maybe just to grab some fantastic miniatures to paint.
      Warriors of Cantwaraburg, Jutgār Unit We'll give you the option to purchase everything in resin, too, if you're more of a painter than a gamer!
      Darklands is a tabletop skirmish wargame in which YOU command the hosts of man and beast that your ancestors once did for glory, power or simple survival.
      You can play Darklands with all of our amazing miniatures, including our incredible monsters and anything produced by this project, in a wargame designed specifically for them in a setting that you already know a lot about... for the lands of darkness, the "dark lands" as we call them, are in fact the north and west of Europe and of course the sunken lands still remembered, yet no longer seen, from ancient times.
       
      Intrigued? Download the Darklands: First Edition Quick Play Guide to learn how to play very quickly, and have a good look at the Lands of Darkness Kindred Guide to give you an insight into the lore behind the game.
       
      Additionally, have a look at the bottom of this project's page for more information on Darklands the wargame!
      New to Darklands? Choose your infantry host, and get the "STARTER BUNDLE" reward!
       
      It's the easiest way to get playing!
      To keep things as simple as possible, this project’s rewards are based around the concept of a Starter Host. All Starter Hosts contain a small Darklands host of around 499 gold - so Encounter Host size - where possible, and you can add the Darklands: First Edition rule book, order tokens and D10 dice to your pledge to ensure you have everything you need to get started!
      As well as the hosts listed in the stretch goals, you can purchase any of the Infantry Starter Hosts in metal or resin from the graphic below - either as single purchases or as part of the "FIVE INFANTRY HOSTS" reward.
      Each Infantry Starter Host almost always contains:
      1x Commander 1x Infantry unit of 10x miniatures, including champion, banner bearer and herald where appropriate 1x Monstrous Infantry unit of 5x warriors (50mm) or 3x warriors (60mm) Note that 60mm monstrous infantry units (such as the Srónax) can only be produced in resin regardless of whether your purchase is for a metal host or a resin host.
       
      ADD NEW WARRIORS OF BAALOR / SLEANAGH / WIHTSWEORDS ETC.
       
      Most of these Infantry Starter Hosts are already released to the public; new ones will be released to the public in similar format either later on this year or early next.
      Support Starter Hosts are exactly the same as Infantry Hosts in terms of costs, and always contain:
      1x Support Commander 1x Support Unit of 10x miniatures, including champion 1x Monstrous Support Unit of 3x warriors, including champion  Note that 60mm or 80mm monstrous infantry units (such as the Bholg of Acaill) can only be produced in resin regardless of whether your purchase is for a metal host or a resin host.
       
      Some of these Support Starter Hosts are already released to the public; new ones will be released to the public in similar format either later on this year or early next.
      As well as the Infantry Starter Hosts and Support Starter Hosts we have a number of Monstrous Infantry Starter Hosts, based around the same principle of 499 gold or Encounter Host size, where possible.
      Each Monstrous Infantry Starter Host almost always contains:
      1x Monstrous Commander 1x Monstrous Infantry unit of 5x miniatures, including champion, banner bearer and herald where appropriate 1x Monstrous Beast Note that 60mm monstrous infantry hosts and all of the monstrous beasts will only be produced in resin regardless of whether your purchase is for a metal host or a resin host.
       
      Most of these Monstrous Infantry Starter Hosts are already released to the public; new ones will be released to the public in similar format either later on this year or early next.
      We're also introducing a new type of host this time around - the Monstrous Beast Starter Host, which will bring some excellent punch to your hosts! These are based around units of 3x 80mm monstrous beast units, such as the Felljötunn Host.
      Monstrous Beast Starter Hosts can only be produced in resin. Each of these Monstrous Infantry Starter Hosts will be released to the public in similar format either later on this year or early next.
  • Who's Online   11 Members, 0 Anonymous, 0 Guests (See full list)