ladystorm

Funded
Reaper Bones 4: Information Thread

245 posts in this topic

Ah, it is on the main page.  I was looking at the one in the update and starting to wonder if Narlgauth ate sir forescale...

4 people like this

Share this post


Link to post
Share on other sites

I started up a Reaper Bones thread on Dakka, but, since I'm supporting the Hand of Glory RPG miniatures KS and looking into the Basius one, I'm encouraging Bones supporters to help out on the thread. 

https://www.dakkadakka.com/dakkaforum/posts/list/734379.page

 

fwiw, I've pulled three Reaper comments I think are useful to know, besides the shipping info.

 

EDIT: "@Rosemary Ann - our previous two projects had an 18 and 20 month fulfillment time, respectively. We believe 18 months to be a realistic and informed estimate. As always, there are many variables that go into manufacturing on a scale of these projects. Should we fail to break $1,000,000, we would probably be able to fulfill much sooner should be raise over $3,000,000 (as we have done twice before) we could even have underestimated!"

EDIT: "@William Blackwood - we have some other offerings that we believe qualify as cute. This project has some more unusual models than previous ones, with some very fun devils, demons, dragons, and undead, and a few off the wall offerings. With the foundation of the bones line strong and stable, we have the flexibility to experiment with new ideas, and try new things, like the absolutely massive Narglauth, and more."

EDIT: "@Keith - we learned through these projects that after delivery, sometimes there are problems. It is so much easier for backers to reference a model by # than by "third model form the right, under the dragon's foot" so we pre-populate the images with numbers. it also makes it easier to a sk about specific models."

7 people like this

Share this post


Link to post
Share on other sites
1 minute ago, Reaperbryan said:

We are likely to end up breaking the Core Set up into sub-units later in the project. Early on, it's confusing to people why they would pay $5 each for 6 groups, versus $100 for the whole thing, but if we wait until later when the $100 item is the CLEAR better value, it works ok.

 

Of course, we're doing some things differently this time, and may crate different divisions than we have done in the past, as well.

 

FYI

4 people like this

Share this post


Link to post
Share on other sites

Posted (edited)

How does Reaper select which paints to offer in their Paint Sets?

 

fyi: Here's the MSP paint chart, where you can see the triads of the paints in Set A : https://www.reapermini.com/Paints/corecolors

 

Drives me nuts I don't know how to best use a color of paint, but pick 'em up, nonetheless! :lol:

 

EDIT: "@C- Anne makes the decision. She wanted to choose a balanced set, that would be useful to the largest audience, by having a good variety of useful colors."

Edited by ced1106
3 people like this

Share this post


Link to post
Share on other sites

Posted (edited)

Day 1 Infobits Summary!

 

These are important and/or interesting bits of information from the Reaper team, posted in the KS comments. There will be a lot of stuff these first few days.

 

Quote

@Frencois - Sophie and Friends usually show up later in the campaign.

Quote

@Zombie Painter - yes, we are estimating an 18 month delivery time. This is roughly on par with delivery for our previous projects

Quote

@Rattasak - yes, all rewards ship simultaneously and in as few boxes as we can fit them into

Quote

@Amanda - The Pledge Manager will be open until July 31, 2018

Quote

@Weresheep - whether you add shipping to your pledged amount on the project, or after is entirely up to you.

Quote

There will be both fantasy and sci-fi models in this campaign. We aim to provide something for everyone

Quote

@Keenan Parker - there should be some terrain added in later in the campaign as well.

Quote

@Melhilion - we will ship all European, African, and Russian parcels from our hub in Nottingham, UK

 

Quote

@David Rickey - in previous projects we estimated 12-14 months. This time we are estimating 18 months. For comparison, Bones 2 took 18 months, and Bones 3 took 20, so we feel this is a reasonable estimate.

 

Quote

Nielsen about 14 hours ago

You write any backer outside the UK has to pay their own VAT yet have the EU friendly sticker on? How is that to be understood?

 

@Nielsen - that's a blanket statement to cover us in case "Brexit" changes the import fees in ways we cannot anticipate

 

Quote

@Francesco di Nuzzo - while not all EU or Pacific orders will ship simultaneously, they will not be sorted into waves.

 

Quote

@Rattasak - the fantasy Bones will be in a slightly darker color than our early products, and any Chronoscope models added will be in the newer, "dark grey" material

 

Quote

@Mercurious - it is very likely that we will ship the containers to the EU and AU hubs before US backer shipments begin. However, it is also likely that US backer will receive their shipments before the other two zones, because of global transit times.  also note that the reward levels do not tell you that US Wave 1 will ship first. Only that it will ship before wave 2.

 

Will continue in another post.

 

Huzzah!

--OneBoot :D

Edited by OneBoot
removed blue backgrounds from posts
18 people like this

Share this post


Link to post
Share on other sites

Day 1 Infobits Summary, continued:

 

Quote

@Storm 72 - if you add items, it may cause your shipping to increase. If you change your destination country, it will cause a shipping change, and in some cases (Texas, UK) may add VAT charges as well

 

Quote

@Fab - because our EU and AU facilities will ship parcels in the order in which they unload the container, and we have no adequate mechanism to enforce strict wave order.

 

Quote

@Amanda - you can add add and pay for additional rewards in the pm until July 31, 2018. You may have multiple individual orders, and we will combine them into as few boxes as possible before shipping.

 

Quote

@Fab - we are not experts in EU and Brexit law. We cannot adequately predict what the final terms of the UK leaving the EU will be, and will have to adapt and respond accordingly.

 

Quote

@Benjamin Grady - Facebook would not allow us to create an event with a duration greater than 15 days, so we set it as long as we could. The Kickstarter End date on this site is accurate.

 

Quote

Zombie Painter about 13 hours ago

@reaper Is Victoria Miniature in the future for bones 4?

.

@Zombie Painter - we shall see. Lots of things to unlock and explore.

 

Quote

@Kirke - the majority of models will be new sculpts, with some being new sculpts of concepts we have done before (like a new owl bear, for example).

 

Quote

@Phillaco - about 80% of future goals are decided. We have pool of more ideas and sculpts than we can use, so we use backer feedback, suggestions, and ideas, to choose from among those.

 

Quote

Ant about 13 hours ago

Are the hill giants in scale with the previous hill giants?

-

@Ant - yes.

 

Quote

@Erk - there may be variations in the phenotypes of many fantasy races, to suit the tastes of various groups.

 

Continued in another post.

 

Huzzah!

--OneBoot :D

14 people like this

Share this post


Link to post
Share on other sites

Day 1 Infobits Summary, still continued:

 

Quote

Frances about 13 hours ago

Actual chibi miniatures are coming for the adventurers in the comic, right? Right??? *sob*

-

@Frances - maaaaaaaaaybe

 

Quote

@Chris Renz - no rewards are mandatory. Think of it like when you're at the grocery store - you can get any item you want without being required to buy any other.

 

Quote

@Montyhaul - we had 32mm bases offered in our BaseBoss kickstarter, which fulfilled last month. They will be available in our online store before the end of September.

 

Quote

@reaper how much will shipping increase based on order size Na

-

@lichen - it's a factor of weight. if you add very small things, very little. If you order large things, more. It is possible for shipping to double or more, if you add a lot. We have worked with several postal and delivery services to match their rates, and weight seems to be the number one factor.

 

Quote

Earlier today, in the PM, the graphic had names instead of numbers - Jahenna, for example, instead of '3'. Will that come back?

-

@Pinkymadigan- unlikely. Numbers are how they are referenced in our database, so it helps us to have that.

 

Quote

@Griffonknight - we no longer offer the option to pick up rewards at our factory.

 

Quote

@Holoturie - we do not have a licensing deal with Frostgrave, and so cannot pursue models branded for them, or based on their art. We do have a deal with Paizo that permits us to release Pathfinder branded models based on Paizo's excellent art. 
However, we do produce many models which would be suitable for that game, and many many others.

 

Quote

@Jason Gamble - #9 is not currently available in metal.

 

Quote

Pledging this for the first time, but what is included if I pledge $1?

-

@Zachary - nothing is included. You change your pledge level to the dollar amount necessary to cover the reward(s) you want, and select those models in our pledge manager (ks.reapermini.com/bones4)

 

Quote

We have added the Tabletop Subcategory.

 

Quote

Prediction: The 5th and 6th days tend to be the slowest days of any Kickstarter. Weekends also tend to be slow days. Those two things for this KS coincide this weekend. It will be relatively slow days of this already successful KS, and as a result, there will be a few people here in the comments figuratively screaming at Reaper that they did X to completely ruin the momentum of the KS - despite the fact that said slowdown tends to be the rule.

-

@Royal Blacksmith - our analysis matches that very nicely. We are prepared for such an eventuality

 

Quote

@Brandon - We often provide a way to get parts of the Core Sets later in the project, although we may be structuring those sub-parts differently this time.

 

Continued in another post.

 

Huzzah!

--OneBoot :D

13 people like this

Share this post


Link to post
Share on other sites

Day 1 Infobits Summary, further continued:

 

Quote

@Aegith - the goblins will have integral bases

 

Quote

@Anonymous etc. etc. - DFTBA = Don't Forget To Be Awesome.

 

Quote

Why does the Fire Giant Houndsman look like he has pillows for feet?

-

@Cliff - it's mostly an illusion of angle and positioning.

 

Quote

@Back5 - Later in the campaign we will break the Core Set into smaller sub-sets, and backers can choose to get the full Core, or one or more smaller subsets. It is always a better value, price per model, to get the full core, however

 

Quote

@Crimson King - under "Sales Tax, VAT & Shipping" our shipping charges are explained. No zones have free shipping, and all backers will be shipped form one of 3 hubs, intended to ease the burdens of duties and import tariffs

 

Quote

We might have some unique undead planned.

 

Quote

@Robert - you know we can neither confirm nor deny any pizza dungeons, gazebos, or the like.

 

Quote

It's hard to tell from the picture. Is there a large chain that connects the fire giant to the hound as a leash? Would it always be one piece?

-

@John Williams - it may not be one piece. The mold makers will make cost as determined by the needs of the models and the material.

 

Quote

one observation: the armoured goblins are 6 not five as the latest update mentioned, i am right?

-

@Jose Luis - 6, as pictured. When in doubt, the image is *always* correct

 

Quote

@Paul Berry - We don't expect that every backer will love every goal. It would be silly if we did, it's never happened before!

 

Quote

@Robert - integrated bases are the norm, and we may offer additional bases, which some backers prefer for uniformity of appearance and stability reasons.

 

Quote

@William Blackwood - we have some other offerings that we believe qualify as cute. This project has some more unusual models than previous ones, with some very fun devils, demons, dragons, and undead, and a few off the wall offerings. With the foundation of the bones line strong and stable, we have the flexibility to experiment with new ideas, and try new things, like the absolutely massive Narglauth, and more.

 

Continued in a later post....

 

Huzzah!

--OneBoot :D

11 people like this

Share this post


Link to post
Share on other sites

Is anyone having issues with the pledge manager ? I'm not talking about it not adding stretch goals - I'm not talking about it not turning up at all. Pure white screen, no option to log out, let alone log back in again (Firefox, Windows 10)

1 minute ago, Dr Boom said:

Is anyone having issues with the pledge manager ? I'm not talking about it not adding stretch goals - I'm not talking about it not turning up at all. Pure white screen, no option to log out, let alone log back in again (Firefox, Windows 10)

 

. . . and ignore that - it started working again. Possibly a little tired

2 people like this

Share this post


Link to post
Share on other sites

Posted (edited)

Day 1 Infobits Summary, even more continued (sorry there's so much, the first couple of days there tends to be a LOT of questions and answers):

 

Quote

@Reaper - is there any chance of some cute chibi style kid adventurers (Wizards, Witches etc) to go with the fantastic Bonesylvanian line of minis?

-

@Steve Hall - *shakes magic 8 ball*. Outlook Positive. Perhaps something based off the quartet featured not eh map, or in the introductory comic book? Maybe a few of their friends? I don't know for sure, the future is hazy.

 

Quote

Are the fire giant and hound actually connected or two distinct models?

-

@Ant - distinct models, designed to connect.

 

Quote

As much as I love dwarves, I think the halflings and gnomes are actually doing worse than dwarves in all the Bones available to date.

-

@Arjen Van Loon - you are correct. The standard fantasy races of halflings and bones are under-represented in Bones relative to the taller races, including dwarves.

 

Quote

There is a noticeable lack of dual (or even single) daggers.

-

@Grayfax - one of the things we take into considerations that sometimes the smaller things don't translate as well to Bones. Daggers are one of those things. Also, sadly, many of our existing female sculpts are a little ... waifish ... and would not hold up well. This presents us with challenges in representing these types of models in Bones.

 

Quote

Ugh Texas pays tax. That sucks. I don't remember that in bones 1-2 or shipping for USA. 

-

@Jason, we had to start doing that in Bones 3. The law is the law, and sales taxes for texas residents are mandatory. We collect sales tax on our web store too.

 

Quote

One thing I have noticed with all the previous Kickstarters is the lack of models with spears. There's lots of swords and axes, but few spears and next to no spear/shield models. Any chance we will see some spear action in this Bones?

-

@Ronnke - spears tend to become floppy in Bones. However, we have some ideas, which we will discuss in future updates (probably in the next few slower weeks) that should be of interest.

 

Quote

@Reaper will we ever see textured bases (rocks, industrial, etc) in bonesium?

-

@Montyhaul - Will we ever? I cannot predict the future.

 

Quote

@reaper any chance of seeing any dwarfs or umber hulk like creatures in the upcoming goals?

-

@Christian - there's HUNDREDS of models we have left to reveal, if we reach funding similar to previous projects. Time will tell how far we get.

 

Again, continued in a later post....

 

Huzzah!

--OneBoot :D

Edited by OneBoot
13 people like this

Share this post


Link to post
Share on other sites

Day 1 Infobit Summary, the continuation:

 

Quote

@Anonymous - well, the 4 Sci-fi dinosaurs on the Chronoscope goal I just showed were requested specifically by me, so that's exciting. But no, we expect a similar U curve to last time, with an extended slow period in between the initial 2 day and final 2 day pushes. This give us time to add value, and get the word out, as well as experiment with interesting and fun goal ideas.

 

Quote

@reaper, What is the base size of the wraiths? will they fit on a 20mm base?

-

@Maikel - they are roughly analogous to human size in scale, so a 20-25 mm base would be appropriate.

 

Quote

@Sir Geekjeff - the Chronoscope models will be in the same dark grey as the miniatures you mention. Other fantasy models will be in a slightly darker neutral than normal, bit nowhere near that dark. Still "white to off white"

 

Quote

@Dave Gross - we will definitely have a team meeting tomorrow and discuss all of the suggestions, including the many calls for additional respectful female representation.

 

Quote

@Rx2Web - Warforged, and Eberron are both licenses which Reaper does not have. I would not expect these models to be a part of this project.

 

Quote

@Moose Shepard - any suggestion that comes up from more than one backer and across more than one 15 minute period gets reviewed. about 80-90% of the goals are fixed, but there is some flexibility in what we can offer, especially in the late stages of the project, as the artist might have time to create some of those ideas between now and then

-

@Stephen Buckley - Yes, we listen to suggestions. about 80% of the project is set in stone. Another 15% or so is grabbed form a list of possible ideas - more ideas than can amen it in, so if the crowd advocates for one of those many ideas more than for others, that one is chosen. Another handful are left relatively open, and we see if our sculptors are inspired by these ideas. In Bones 3 this led to the Froghemoth and Hobgoblins, which were both popular requests.

 

Quote

We pride ourselves on making enough variety that there is something for everyone. Rather like a good pizza, you may not like every topping on the menu, but you can choose for yourself what you get There is no need for this to become a fantasy vs sci-fi war.

 

Quote

While many of these models are brand new for this kickstarter, others are Bones versions of miniatures we have produced in metal. We have always had a mix, although this project does have more new sculpts than any other so far.

 

Quote

@VancianNotions - at this time, there is not the ability to pick and choose form the Core Set. We have opened that option up in late stages of the project, and it has never been a retrograde process - it has always resulted in an influx of pledges, not an outflux of funding. Should we decide to do this, it will happen MUCH later in the campaign. Remember we are less than 8 hours into a 33 day campaign. There is plenty of time for us to do lots of innovative things.

 

Quote

More undead, and more monsters! Id love some large/huge eyebeasts.

-

@graham - we'll see what we can do :)

 

Quote

Honestly - "Please make minis like X" is much more useful to us than "please do not make minis like Y". We will resoundly ignore the second statement if such models are already on the slate, but have room to make items like the first statement happen.

 

Quote

Anyone think we have a chance of seeing Game of Thrones themed miniatures?

-

@Alexander Bortz - we don't often comment on future goals, ("we can neither confirm nor deny" is our mantra) but for licensed properties, we do. We do not have that license. Further, George is a miniatures fan, and a friend of some of the owners of the company. He has a license with Darksword miniatures, whose owner, Jim Ludwig I consider a personal friend. 
As such, we will be very very respectful of their IP and rights, and so there will not likely be anything resembling GoT models in this project.

 

Quote

reaper, will there be more stories added for Mr. Bones and his group as we go?

-

@Matthew - it's something new, if it goes over well, yes. We've not gotten any comments about the storyline comic

 

Continued in a later post....

 

Huzzah!

--OneBoot :D

12 people like this

Share this post


Link to post
Share on other sites

Posted (edited)

Day 1 Infobits Summary (last one for Day 1):

 

Quote

Great... we split the party again... Mr. DM Bones is going to punish them for that one of these times!

-

@Grey fax - eventually, yes!

 

Quote

@Matthew - much later in the project. We typically do not break up the Core Set until the final week or thereabouts.

 

Quote

@Bill Meekins - all rewards will ship together. We will not even MAKE the paint for this project unit a few weeks before shipping, since freshness can be an issue with paint.

-

@Kriostopher - yes, the paint is always timed to wrap up production around the estimated arrival dates of the final product form our partners in China

-

@Talae - we have to limit how many paints are offered because our production capacity maxes out at 21 gallons per day. Across thousands of backers, that's MONTHS of paint production just for 12 colors, it might take years just to produce if we expanded the offering to 54 color 0- and that with no paint being made for other sales and products.

 

Quote

@Graham - In bones 3 we experimented with adding on new Stretch Goals in the Pledge Manager, outside of the Kickstarter project. It is possible we may do something similar here, but I cannot promise it at this time.

 

Quote

Well, his real name is Garrick VonScale, The Bold. People just call him sir Forscale.

 

Quote

We've updated many classic characters as part of our 25th Anniversary celebration. I don't see why we couldn't update Sir F. although for consistency sake, we would likely use the same model in any future images and (purely hypothetical) projects. You people nearly gave me a heart attack suggesting Bones 8.

 

Quote

Will the shipping be taken at the time of pledge and "locked in" or will shipping be charged later at fulfillment?

-

@Eric - when you lock in your pledge. It is based off of current shipping rates, and may be updated in the 10 month window the PM is open, so it may be cheapest to lock in as soon as we offer that option

 

Quote

@Reaper: How do you decide what paints to offer in a KS?

-

@C- Anne makes the decision. She wanted to choose a balanced set, that would be useful to the largest audience, by having a good variety of useful colors.

 

Quote

@Cortney - to make it easier for us to reach goals in the middle period, we have made those goals shorter by padding the earlier ones that happen during the early days.

-

@Cortney - You've got it. Saving the most anticipated goals for slower times, to help maintain a steadier pace. The long 30 days in the middle will go by faster if there's something new to see regularly

 

Quote

@Christian - EU backers will ship to our facility in the UK, and they will be processed as one wave. It is expected that they will ship TO the UK before US shipping begins, although they will probably arrive after US shipping has concluded.

 

Quote

Graveyard set: Reaper Bryan : "I have been informed that we have asked for a set of items to put atop the pillars, like gargoyles and torches and such." 

will that be an add on during this Kickstarter?

-

@Daniel - they're on tap for this project, yes

 

Quote

ok Ron, the big teams so far, Team Flumph, Team Gazebo, Team Roc, Team Dino, Team Pirate Ship, Team Flail Snail. There's others, too

 

Note for future self: at this point, Ron joined the comments.

 

That wraps it up for Day 1, whew!

 

Huzzah!

--OneBoot :D

Edited by OneBoot
17 people like this

Share this post


Link to post
Share on other sites

For those that have some odditites with the Pledge Manager, there is a known issue that if you are in it when an Update is released it can cause issues.  Just log out and back in and it should work fine again (worst case you might need to close out your browser as well).

1 person likes this

Share this post


Link to post
Share on other sites

Have there been any changes/tweaks/adjustments to the material the figures are made out of this time around?

Will any/some/all of the new figures be the gray material that some of the Bones 3 figures were made of?

1 person likes this

Share this post


Link to post
Share on other sites
23 minutes ago, Chaoswolf said:

Have there been any changes/tweaks/adjustments to the material the figures are made out of this time around?

Will any/some/all of the new figures be the gray material that some of the Bones 3 figures were made of?

 

Somewhere in the KS comments it was said that the Chronoscope figures will be in grey the fantasy figures in off white. 

 

Check oneboot's summaries in the enthusiasm thread. 

4 people like this

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Ash Adler
      I had a really good time with this kit, and I feel like I learned a lot from it, too.  Win-win!
       

      This is probably my best paint job to date, and it was pretty cool to see those highlights and shades build up layer by layer.  Similar to the skeleton in the first kit, this one was quite fun to work on despite being a fairly simple model.
       

      If the wizard was the best paint job, this one was the most fun.  Sadly, something about the posture just confounded me when it came to trying to take good pictures of it.  Also, those lips
       

      I was a bit sloppy with this one, probably because I wanted to just finish with the kits and get on to doing my own minis again.  Nevertheless, it was a neat challenge to try doing so many layers of colors for this one, and if nothing else, that left eye is probably the best eye I've painted (right one's a bit of a mess ).
       
      On the whole, I'm very grateful for all of the people who suggested getting the LTP kits.  Definitely a great couple of learning tools.  Many thanks!
    • By Guildenstern
      Idk if this is a KS model or one I randomly bought to fill out our need for giant monsters that are not cardboard cutouts. Anyway, he's done. He was going to maybe go in a desert diorama but I decided against (he didn't end up fitting). I might go back over his claw bits again tho, they seem a lot darker in the pic than they do IRL but theyr'e still just not quite right. Anyway, he's based on a couple of RL pics, mostly going for a shiny red carapace kind of idea. He's not in my WIP thread, so just a quick note, I undercoated him mournfang brown (a red brown GW colour) and then built up to the red with reaper's bloodstain red and later clotted red (my absolutely fave triad *ever*)
       

    • By SamuraiJack
       
       
      About this project
       
       
       Behold! Legions of tabletop gamers! The Table of Ultimate Gaming has arrived! 
      Amazing features, accessories and expandability make this the gaming table we all have been waiting for. The Table of Ultimate Gaming allows you to play your games, your way. We create unmatched gaming table systems and accessories, then deliver them right to your door.
       3'x5' coffee table height Table of Ultimate Gaming in natural color
      3'x5' standard height in natural color. Shown with optional decoration packs and full table covers which store inside table and become 4 desks! 
       You are always ready to game on the Coffee Table of Ultimate Gaming! 
      3'x5' table in Storm Grey color set in the deep play position ready for a dungeon crawl. You can build any Table of Ultimate Gaming to offer either a shallow or a deep play floor depth.
      The majestic 4'x6' Table of Ultimate Gaming in pitch black color. Showing optional cup holder/dice tray combo accessories. 
      The Table of Ultimate Gaming is a complete modular and expandable system that puts you in the driver's seat. With unmatched features at a price you can afford, this system gives you full control over your games and events. We design on computers and cut roboticaly so every product is perfectly manufactured. The highest quality materials such as durable European birch hardwood construction and water based paints ensure years of safety, reliability and make these tables and accessories suitable for home use, game stores, gaming events, or game cafes and restaurants.
      Kickstarter table packages start at $599.00 for 3'x5' tables AC power and USB power outlets in two locations. You will have the correct regional power receptacles for your region.  Each table features an adjustable height play surface. Choose a shallow depth play surface of 1.5" or a deep play surface of 3.5".   You can also choose between three table heights: coffee table height, traditional height and counter-top height. Add modular decorations that swich out in an instant. Add full table covers which store inside table and become 4 desks! Many accessories like cup holder, card organizers, campaign screens and more are at your fingertips with the Table of Ultimate Gaming. Intelligent design and community feedback have created not just a game table, but a gaming system that adapts to your needs and style of play. Created from imagination, designed on computers and finished by hand, the Table of Ultimate Gaming is your gateway to a thousand adventures.
         
    • By Gadgetman!
      It's 2 years in the making, and larger than Zelda: Link's Awakening, and still fits in your pocket!
       
      There's still a few Arduventure edition Arduboy pledges left... 
      (The game will work on the Standard edition, also. but the KS exclusive eition looks good... )
       
    • By haldir

       
      http://kck.st/2vPLQ8t
       
      Always have loved this style of mapping ever since Castle Ravenloft came out way back when.
       
      Looks interesting,
  • Who's Online   30 Members, 5 Anonymous, 0 Guests (See full list)