Jump to content

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Dan d'Lyon
      Can't believe I missed this one until now.  I didn't have a printer during their previous projects, but I'm definitely in on this one.  Less than 48 hours to go.  Link added.
       
      https://www.kickstarter.com/projects/2nddynasty/starship-iii-fully-3d-printable-28mm-spaceships?ref=user_menu
       
      Seek adventure amongst the stars! Explore strange new worlds, smuggle illicit cargos across the hyperspace lanes or launch a space to ground assault, in your Scout Ship, Transport, or Space Shuttle!
      Somewhere in the outer reaches... Starship III introduces three original, fully 3D-printable spaceships scaled for 28mm play in your favourite Tabletop RPGs or Wargames. Complete with OpenLOCK-compatible modular interiors, the ships are detailed inside and out and a variety of configurations can be used to customise the deck plans.
      Each ship comes detailed inside and out (Scout ship standard interior shown here) As the campaign unfolds, new starship hull variants and modules will be unlocked as stretch goals to bring even more variety to your game and increase the pledge value for everyone.
      Each pledge is designed to be printed on your own 3D printer or via a print service, allowing you to print as many parts as you like, for non-commercial use. Deliverable files will be made available digitally in STL zip packs via DriveThruRPG.com (see Printing Requirements details below for print bed size requirements)
      Hangar 01: Space Shuttle Alpha Need a way to get your units from the ground to orbit? This space shuttle is fully modular and can be configured as a dropship, cargo shuttle, or even a small starship. The stock standard aerodynamic fuselage comes complete with manoeuvring thrusters, sensors, landing gear and articulated main thrusters for VTOL operations.
      The standard layout below is included in any pledges that include the shuttle Modular standard deck plan of shuttle interior. Hangar 02: Scout Ship Beta Explore deep space and final frontiers with this full 28mm scale scout ship, designed stock-standard for long haul endurance scout missions. Includes two manned turrets for defending in rough territory, a full sensor suite package for scanning new systems, a well equipped engineering section, cargo hold, living quarters and a 5-station forward bridge.
      These are the unique parts that compose the scout ship interior, which come as a part of any scout ship pledge Closeup of the Engineering Standard Deck Plan for the Scout Ship Beta Hangar 03: Transport Delta Cruise the hyperspace lanes in this high-speed transport. Haul cargo - legal or illicit - with two massive engines to get you from point A to point B. Manoeuvre with the fluidity of repulsor technology and defend yourself with manned or unmanned turrets and a powerful shield generator.
         
    • By Jasper_the_2nd
      Just noticed this KS was posted here. Only 53 hours left....

      https://www.kickstarter.com/projects/wowbuildings/wowbuildings-further-space-adventures-3d-print-stl/description
       
      Here we are folks, WOWBuildings is expanding further into space, with the infrastructure now for several types of scenarios, this KS will be a mix of vehicles and Buildings so you will have an even bigger range of choices for your tabletops. all will come in STL format and cuts will be made where needed so boot up those 3D printers once again and jump on board for what hopefully will be a great sack full of goodies to enjoy.
      I am adding a couple of special adds that are for personal print use only as a little treat for you top end backers, all files will be initially 28mm scaled (but slightly over scaled to allow for GW sized figures) and optimized for 15-32mm scales so hopefully something for all.
      Again human based faction designs for this KS with other races in the pipeline if all goes well, so hello again and as usual keep the feedback coming and if you want anything specific added then just ask, if it can be done it will be so
      Stretch Goals as you see will start at £1000, and £500, but this time i am toying with adding some £250 jump points too here and there to add to the fun.
      I have tried to keep the pledge level prices as low as i can as well including the licence which is an absolute bargain price for this KS as a thank you for continued support and to help with those after Xmas blues.
      £10 Road Builder
      £30 Asteroid Miner
      £40 Planet Settler
    • By MiniDungeonMaster
      My first show off thread! Not because I am prouder of these than anything else, more that these were close to hand when I considered taking photos and keeping more of a visual record of my mini painting adventures.
       
      OH's dad and partner got me these, amongst other, Otherworld Miniatures for Christmas and I thought these were really fun sculpts! I did these in one evening (and maybe another half hour the next day), and I'm happy with their table-top level quality. I used aquarium plant on the bases and I'm thinking I may go back and paint over that as it is quite bold- but for now I consider these done! 
       
      Unfortunately I can't foresee these swamp-dwellers making an appearance in my City dwelling d&d campaign, but you never know! 



    • By pcktlnt
      Link
       
      About this project
      I've been making miniatures for about three years now, during that time I've made sculpts for various miniature companies as a freelancer sculptor. Now I've decide do to take the plunge and produce some of my own miniatures. That aspiration led me to Kickstarter.
       
      I've been busy sculpting the range of undead miniatures presented here over the last few months. They're predominantly 28mm sculpts, the Undead Heroes are larger at 32mm scale, to fit their powerful status. I consciously made them an eclectic bunch, including animals. My vision of the undead force is a terrifying mix of all forms of life, bent to the will of their masters. 
       
      During the course of this campaign, I'll continue to sculpt miniatures to add to the range. I have a Facebook Group - March of the Dead, where I'm working on suggestions offered by the groups members. The more popular ones will be joining the miniatures here.
       
      The objectives of this project are to firstly see the miniatures produced in white metal by Macrocosm Miniatures and in your possession In a timely manner. 
       
      If things go really well, then hopefully I can also get a shiny website made, so I can continue producing miniatures and offer them online.
       
      Anyway. I think that covers the background. Time to show you the miniatures on offer.....
       
      To select multiple rewards, pick one of your choices, then amend the total to include the grand total. I'll then collect the details of your order with the Pledge Manager.
       

       

       

       

    • By Gadgetman!
      Bunny Girls, modeled by Brother vinnie. Need I say more?
       
      There's also a set of bunnies to choose for those who need a familiar or just to add to a diorama.
       
  • Who's Online   15 Members, 1 Anonymous, 148 Guests (See full list)

×