Jump to content
SamuraiJack

30mm to 110mm Fantasy Miniatures & Sculptures

Recommended Posts

 

About

Welcome to my Kickstarter !

I am very excited to present my figures to you in this Kickstarter.  This is my second Kickstarter campaign, and I have been busy getting everything ready to show off.

The figures and creatures in this campaign have been lurking in my head for years, and now they are finally being made into reality.  Designed and sculpted by me, Mark (aka Frozen Ninja - 3D Sculpting), I am also making silicon molds and doing resin casts of the majority of the figures.  The 3D printing is being done by the best printers out there, such as Zealot Miniatures and GT Studio Creations.

I am well prepared for this campaign, and I have help and support lined up should they be required.

Thank you for taking the time to view my campaign!  LETS SEE SOME MINIATURES!  First I will show the 3D render, then the Resin Casting.

f5c60696daf2e0a986c02bcb63b8f863_origina

 The Big Guy

The Big Guy 28mm was designed to be a little smaller than the standard 30mm figures, because I wanted him to appear that way when standing alongside the others.  He got the nickname Big Guy because of his large attitude, not his large presence.  However, his 55mm counterpart is ideally suited to be a giant or a boss in a war-game.  He is ready to take on an army!

The Big Guy is available in 2 sizes, and resin casts are in hand and ready to ship out.  The following pictures are of resin copies and were base-coated in white, then they were given a dark wash, and then a white dry-brush.

7ae24fff95b0b7294f4df4418c4f8c26_origina

 

47adf54f8a2f002378668fdd703a1fbb_origina

 TREE GOLEM

Tree Golem is available in 2 sizes, and resin casts are in hand and ready to ship out.  The following pictures are of resin copies and were base-coated in white, then they were given a dark wash, and then a white dry-brush.  There are a LOT of leaves on this guy!!

70a84ebc62f16e0baae7c03e2609c210_origina

 

8fe4bff13b978daf9d48027ed5bc5c22_origina

 Reef Warrior 1

Reef Warrior 1 comes with one dock piece, and resin casts are in hand and ready to ship out.  The following pictures are of resin copies and were base-coated in white, then they were given a dark wash, and then a white dry-brush. 

16eed1ca9f82352570fef447c26aac08_origina

 

db3f1e42be3ed1f7a1d8a0b7b005d326_origina

Reef Warrior 2

Casting for Reef Warrior 2 is currently underway.  Pictures of the casts will be uploaded as soon as possible.

9f702860ed0b66300f63a615d0991c9a_origina

Reef Warrior 3

Casting for Reef Warrior 3 is currently underway.  Pictures of the casts will be uploaded as soon as possible.

7fa5de15157104522cfef119acf7700f_origina

Turtle Minion 

The following pictures are 3D prints of the super cute Turtle Minion!  These pictures were sent to me from the printer, and I should have the 3D print in hand within a week.  

cc46deb8be354ba1091296e939e9ee8b_origina

 

8c885df1ccbe905ffebb249007601304_origina

Turtle Boss

The Turtle Boss has been 3D printed, and the print should be mailed to me within a week.

04da634dbf9c5751f7c157b26abec688_origina

Reef Queen

The Reef Queen has been 3D printed, and the prints should be mailed to me within a week. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SamuraiJack
       
       
      About
      The Wrath of Cichol is the first episodic release for Creatures of the Night.
      Creatures of the Night is a fantasy miniature range (and perhaps, in the future, a game) designed by Krakon Games. Each chapter explores a period from the Lebor Gabála Érenn (Book of Invasions) - an Irish histro-mythology exploring the various races to inhabit and invade ancient Eriu (Ireland).
      Chapter 1: The Wrath of Cichol introduces both the Fomorian adversaries and one of the first invaders - Partholón.
      By backing this project you will help fund the production of Krakon Games' first fantasy range and be "rewarded" with your chosen models.
      All models will be cast in resin and supplied without bases. Most are multi-part models that require a little cleaning and assembly.
      There are 8 large character models available at project launch, with a list of stretch goals that will unlock as funding levels increase. If there's something on the stretch goal list you would like, feel free to include it in your pledge total to help unlock it.
      Pledge levels
      The characters
       Fomorians
       
       
       
      Partholóin
       
       
      Scale shots
      All black bases shown are 50mm diameter. The models average around 40mm to their eyes. Here's the starting line-up and a couple of stretch goals in development:
    • By SamuraiJack
       
       
       
      About
       
      Your RPG adventures develop into a world like no other.  The places, the players, the trinkets and treasures that are discovered.
      These vivid constructs exist in our imaginations in incredible detail - our aim is to bring each element of your RPG experience to life with an all new 3D modular dungeon!
      Not just another STL file sale...
      We're living in exciting times; 3D printing has emerged in a variety of industries for rapid prototyping and one-off on demand prints.
      So far, 3D printing has proven extremely expensive for the average Joe given machinery, materials and equipment rental costs.  Frankly, printing a whole Dungeon is not practical or cost effective for the vast majority of RPG players.  That is, until now!
      At RPG Factory, we do not sell virtual files which you'll need to print yourself - we've done all of the hard work for you!
      We produce fully printed products so that you can assemble, paint and play in no time at all!
       
      RPG Factory is built on talent and vision.  We have a huge amount of artistic, CAD and business experience which we're using to deliver a cost effective product which is durable, easy to assemble and practical for RPG gamers of all ages!
      It's been 12 months in the making...
      We've been developing our ideas for months, working out the kinks in our designs to make sure that our products strike a balance between looking good and functioning as gaming pieces.
      We've taken the time to trial the modular system with gamers to make sure that it integrates properly with the most popular gaming systems.  Particularly ones which house fearsome giant lizards in giant concrete underworlds...
      Finally, we've experimented with a number of different materials to ensure that the final product is extremely durable, captures detail and takes paint without discolouration or de-lamination.
      Section of the Dungeon All of this effort and attention to detail has led us to our first Kickstarter, but we won't be stopping there!  The funding for this Kickstarter will be going straight back into the RPG Factory coffers so that we can expand on our range in the future (and boy do we have a lot of ideas for you!!)
      So, if you want to immerse yourself in exciting new adventures, dive right in and Pledge today!
      Crawl through the twisting corridors, facing terrible foes!  
       
         
      We have designed the dungeons to be as modular as possible, giving you a huge number of options!
      A number of components within the Dungeon set can be used in different ways, further increasing versatility.
      Our clip system allows your set to be assembled quickly, for testing layouts and re-engineering your network or corridors and rooms in minutes!
      Our Dungeon components are supplied unassembled and unpainted.
       
       
    • By SamuraiJack
       
      About
      Miniature lights for all shapes
      Grimlight are tiny magnet-controlled light circuits for miniature gaming, dungeon mastering, model trains, LARP:s and whatever else you can think of. Grimlight has the following features:
      Magnetic control – switch on and off without touching the miniature Easy to hide – 0.2 mm wiring laid either inside or on the miniature  Switchable effects – fixed, pulsating or flickering chosen by magnet Convenient – easy to use and install  Small circuit – 21*2.4 mm fits in regular 28 mm miniature bases  Small led's – 0.6 mm fits in a drill hole  Battery operated – using a CR1216 clock battery  Long stand-by time – over a year  Flexible – 2 led's per circuit  Any colour – paint or cover the light thinly in any colour  SHIPPING INCLUDED, WORLDWIDE! How about that?

      Stretch goals
      SEK 140,000: We add additional effect settings to each Grimlight SEK 150,000: Produce a guide for how to modify the software to change lighting effects. Publish all code under an open license. SEK 200,000: We add some fiber optic cables with every physical Grimlight reward, perfect for added variation. To be continued.... Rewards
      To keep it simple there are only a few different reward tiers. For different amounts of Grimlights, just pledge in multiples of the chosen non-"early bird" tier. The regular one that we believe will be what most want is the 250 SEK tier simply called "five grimlights". For ease of handling and due to shipping cost it is only possible to get Grimlight in multiples of five. If you would like to get 15 for example, just pledge 750 SEK. The reward level "5 Grimlights with larger battery holder" are Grimlights that are modified to operate from three AAA batteries instead of from one CR1216. If you want to add lighting to something big and think it would be good with extended time (about 50 times the capacity) before needing to change batteries this is for you. If you have some special needs and ideas for the lighting you need there is also a tier where we can program custom effects for you (within the constraints of what is possible with the micro-controller we are using).
      What it looks like
       
      What our current Grimlight prototypes look like before installation  
      Example of what can be done with a Grimlight and optic fiber    Our first prototype from Conan by Monolith  
      Prototypes leading up to final version, left is oldest.
    • By SamuraiJack
       
      About
      Epic Cards are colorful, illustrated, and highly modular tiles for creating gaming maps for: pen-and-paper, role-playing, D&D and miniature games.
      The Tiles
      The Epic Cards gaming system consists of a large number of colorful, inch-based map tiles, and also features many loot stickers with magic items, weapons and equipment.
      Epic Cards tiles are beautifully hand-painted and designed to be modular, so that they fit together, in any direction.
      Epic Cards Tiles The tiles are 4 x 4 and 8 x 8 inch (10 x 10 and 20 x 20 cm). The smaller 4 x 4 inch tiles are more modular while the larger tiles have more space for individual designs. 
      Tiles in two sizes (4x4 and 8x8 inch) Endless possibilities 
      The system enables players to design entire Dungeons and Environments before the game begins. Players can create new rooms as they explore and the game unfolds. Players simply add tiles to their map, instead of having to stop, play, and draw new rooms while playing.
       
      The Epic Cards System includes: 
      Dungeon System with lots of modular dungeon tiles  Mine System with lots of modular mine tiles Path system  Village building system  Castle building system  Maze creator Hundreds of weapons, magic Items and object sticker Paper clips to attach the tiles side-by-side Epic Cards make it easy for you to play the table-top games you love, so now’s the time to bring Epic Cards into your favourite games!
      Epic Cards make it easy for you to play the table-top games you love, so now’s the time to bring Epic Cards into your favourite games! With your support of our Kickstarter project, we will make epic things happen!
       
    • By SamuraiJack
       
      https://www.kickstarter.com/projects/1492106834/aeon-trespass-nymphs/description
       
      ABOUT THE PROJECT
      Aeon Trespass: Nymphs is a beautiful series of pin-up style miniatures inspired by Greek mythology and the Science Fantasy genre. Each Nymph is a highly detailed resin miniature in the 32mm scale – perfect for painters, collectors and wargamers alike – and comes with a scenic base, an art print and a hand-numbered authenticity note, everything enclosed in hand-stamped craft box. This Kickstarter is a limited collector’s run, which means the miniatures may not be available outside the campaign or, if they are available, they will be released as an unnumbered Encore edition.
      WHY ARE WE DOING THIS?  
      We are a group of passionate professionals, eager to leave our mark upon the miniatures hobby world. With this first limited collection we wanted to make sure our message was clear: we strive for original content of the highest quality. Our pin-up models were inspired by Greek paintings and sculptures. We’ve taken care to be inclusive, choosing to go for the varied natural body types over photoshopped magazine cover artificial beauty. Bottom line: we want you to be satisfied and awed by the hard work of our fantastic artists and sculptors. 
      WHAT IS AEON TRESPASS?  
      Art doesn’t exist in a void. It needs context to be fully realized and appreciated. The great paintings and sculptures are as much a fruit of the artist’s labor, as they are of the times they were created in. So too, we wanted to root our Nymphs in a world that is more tangible and ‘lived-in’. We love world-building and game design; cool giant monsters, grizzled anti-heroes and epic tales of adventure. All that – and much more! – awaits you in the world and game of Aeon Trespass. 
      The story takes places many years after Olympus fell - an event ominously called the Eschaton - when mortals have to deal with both, an unchecked technological progress and a return to more primal beliefs that precede even the old gods. It is a dark, dangerous world, stalked by kaiju-like monsters and visited by otherworldly entities, but one not without hope: courage, valor, loyalty and a penchant for beauty, they all shine the brightest in the pitch black of night.  
      NYMPHS
      The Nymphs are a group of powerful entities that sprang into being after the old gods of Olympus died. Their motivations are unknown and their methods inscrutable. What is known, is that they like to play with the fates of mortals... Below you will find a short description of each Nymph and their place in the world.
      This is just a small foray into that world: a wetting of your feet, if you will. Inspired by the great storytelling works of Dark Souls, Malazan Book of the Fallen and Kingdom Death, we’ve sprinkled small pieces of lore into those sections that will inform you further on the world of Aeon Trespass and point into the direction of its mysteries and secrets.
       
  • Who's Online   10 Members, 2 Anonymous, 0 Guests (See full list)

×