Jump to content
Sign in to follow this  
SamuraiJack

The Path of Osiris Extended : Egyptian Dungeon Game Tiles

Recommended Posts

 

 

About

You asked, we provide.

After the undreamed-of success of our first campaign, The Path of Osiris : Egyptian Dungeon Game Tiles, many asked for more pieces, more designs - and even the 3D-printer files themselves.

We still have our sights on a new environment for Spring 2018, but due to popular demand, we had to revisit Egypt with many new pieces and a brand new expansion : « The path of Osiris : The Tomb Entrance. » Like the first kickstarter project, these will be available in our personal recipe of very durable sandstone with a perfected time-worn look.

We have ideas for many pieces and it can be very costly to mass produce them all, that’s why we are now offering the complete collection The Path of Osiris in 3D file format ready to print yourself. That way, you can print all the parts you need from home. 3D printers now go for less than 250$. Our most tech-savvy backers should be primed to take full advantage of this since printing a tile can cost only a quarter or two !

Options, options, options. Once again, you may order them hand-painted for a genuine Egyptian dungeon feel. Those of you who want more of the original tileset in hand-crafted sandstone, you got it. The full package, new and old tilesets, painted or not, anything goes. Just see the options and we'll set you right up.

*I will be constantly working on new models throughout the whole campaign; please come back frequently to see new pictures or renders.*

Planned Stretch Goals (3D files) :

  • 3K - Free SG : Obelisk
  • Free SG : Corner Sarcophagus
  • Free-SG : Floor trap door
  • Free-SG : Corner Sarcophagus 2
  • *Upgrade : Magnetic ready tiles - 3D files*
  • Free-SG : Large winged scarab 4x4 floor tile
  • Free-SG : Egyptian Brasier
  • Free-SG : Throne
  • Free-SG : Large 5x5 Pyramid
  • Free-SG : 4x4 Sand tile
  • ... want more ?

Add-on Bundle 2 is still in development and more stretch goals including :

  • Futuristic Egyptian portal room
  • Ramp and stair to second floor
  • Puzzle tiles
  • Raised tiles
  • Water pool
  • The Path of Osiris Adventure PDF

*You must pledge "The Tomb Entrance" or higher to get access to all free stretch goals*

The 3D files pledges and add-ons :

Statues and Coffins Statues and Coffins

 

The Ancient Tomb The Ancient Tomb

 

The Throne Room The Throne Room

 

The Tomb Entrance - Include all free stretch goals The Tomb Entrance - Include all free stretch goals

Add-on Bundle 1 :

Addon Bundle 1 - 15$ CAD Addon Bundle 1 - 15$ CAD

Add-on bundle 2 : Will be announced during campaign

Some Free Stretch Goals :

Some Free Stretch Goals Some Free Stretch Goals

 

A large 5x5 pyramid WIP A large 5x5 pyramid WIP
  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SamuraiJack
       
       
      About
      The Wrath of Cichol is the first episodic release for Creatures of the Night.
      Creatures of the Night is a fantasy miniature range (and perhaps, in the future, a game) designed by Krakon Games. Each chapter explores a period from the Lebor Gabála Érenn (Book of Invasions) - an Irish histro-mythology exploring the various races to inhabit and invade ancient Eriu (Ireland).
      Chapter 1: The Wrath of Cichol introduces both the Fomorian adversaries and one of the first invaders - Partholón.
      By backing this project you will help fund the production of Krakon Games' first fantasy range and be "rewarded" with your chosen models.
      All models will be cast in resin and supplied without bases. Most are multi-part models that require a little cleaning and assembly.
      There are 8 large character models available at project launch, with a list of stretch goals that will unlock as funding levels increase. If there's something on the stretch goal list you would like, feel free to include it in your pledge total to help unlock it.
      Pledge levels
      The characters
       Fomorians
       
       
       
      Partholóin
       
       
      Scale shots
      All black bases shown are 50mm diameter. The models average around 40mm to their eyes. Here's the starting line-up and a couple of stretch goals in development:
    • By SamuraiJack
       
       
       
      About
       
      Your RPG adventures develop into a world like no other.  The places, the players, the trinkets and treasures that are discovered.
      These vivid constructs exist in our imaginations in incredible detail - our aim is to bring each element of your RPG experience to life with an all new 3D modular dungeon!
      Not just another STL file sale...
      We're living in exciting times; 3D printing has emerged in a variety of industries for rapid prototyping and one-off on demand prints.
      So far, 3D printing has proven extremely expensive for the average Joe given machinery, materials and equipment rental costs.  Frankly, printing a whole Dungeon is not practical or cost effective for the vast majority of RPG players.  That is, until now!
      At RPG Factory, we do not sell virtual files which you'll need to print yourself - we've done all of the hard work for you!
      We produce fully printed products so that you can assemble, paint and play in no time at all!
       
      RPG Factory is built on talent and vision.  We have a huge amount of artistic, CAD and business experience which we're using to deliver a cost effective product which is durable, easy to assemble and practical for RPG gamers of all ages!
      It's been 12 months in the making...
      We've been developing our ideas for months, working out the kinks in our designs to make sure that our products strike a balance between looking good and functioning as gaming pieces.
      We've taken the time to trial the modular system with gamers to make sure that it integrates properly with the most popular gaming systems.  Particularly ones which house fearsome giant lizards in giant concrete underworlds...
      Finally, we've experimented with a number of different materials to ensure that the final product is extremely durable, captures detail and takes paint without discolouration or de-lamination.
      Section of the Dungeon All of this effort and attention to detail has led us to our first Kickstarter, but we won't be stopping there!  The funding for this Kickstarter will be going straight back into the RPG Factory coffers so that we can expand on our range in the future (and boy do we have a lot of ideas for you!!)
      So, if you want to immerse yourself in exciting new adventures, dive right in and Pledge today!
      Crawl through the twisting corridors, facing terrible foes!  
       
         
      We have designed the dungeons to be as modular as possible, giving you a huge number of options!
      A number of components within the Dungeon set can be used in different ways, further increasing versatility.
      Our clip system allows your set to be assembled quickly, for testing layouts and re-engineering your network or corridors and rooms in minutes!
      Our Dungeon components are supplied unassembled and unpainted.
       
       
    • By SamuraiJack
       
      About
      Miniature lights for all shapes
      Grimlight are tiny magnet-controlled light circuits for miniature gaming, dungeon mastering, model trains, LARP:s and whatever else you can think of. Grimlight has the following features:
      Magnetic control – switch on and off without touching the miniature Easy to hide – 0.2 mm wiring laid either inside or on the miniature  Switchable effects – fixed, pulsating or flickering chosen by magnet Convenient – easy to use and install  Small circuit – 21*2.4 mm fits in regular 28 mm miniature bases  Small led's – 0.6 mm fits in a drill hole  Battery operated – using a CR1216 clock battery  Long stand-by time – over a year  Flexible – 2 led's per circuit  Any colour – paint or cover the light thinly in any colour  SHIPPING INCLUDED, WORLDWIDE! How about that?

      Stretch goals
      SEK 140,000: We add additional effect settings to each Grimlight SEK 150,000: Produce a guide for how to modify the software to change lighting effects. Publish all code under an open license. SEK 200,000: We add some fiber optic cables with every physical Grimlight reward, perfect for added variation. To be continued.... Rewards
      To keep it simple there are only a few different reward tiers. For different amounts of Grimlights, just pledge in multiples of the chosen non-"early bird" tier. The regular one that we believe will be what most want is the 250 SEK tier simply called "five grimlights". For ease of handling and due to shipping cost it is only possible to get Grimlight in multiples of five. If you would like to get 15 for example, just pledge 750 SEK. The reward level "5 Grimlights with larger battery holder" are Grimlights that are modified to operate from three AAA batteries instead of from one CR1216. If you want to add lighting to something big and think it would be good with extended time (about 50 times the capacity) before needing to change batteries this is for you. If you have some special needs and ideas for the lighting you need there is also a tier where we can program custom effects for you (within the constraints of what is possible with the micro-controller we are using).
      What it looks like
       
      What our current Grimlight prototypes look like before installation  
      Example of what can be done with a Grimlight and optic fiber    Our first prototype from Conan by Monolith  
      Prototypes leading up to final version, left is oldest.
    • By SamuraiJack
       
      About
      Epic Cards are colorful, illustrated, and highly modular tiles for creating gaming maps for: pen-and-paper, role-playing, D&D and miniature games.
      The Tiles
      The Epic Cards gaming system consists of a large number of colorful, inch-based map tiles, and also features many loot stickers with magic items, weapons and equipment.
      Epic Cards tiles are beautifully hand-painted and designed to be modular, so that they fit together, in any direction.
      Epic Cards Tiles The tiles are 4 x 4 and 8 x 8 inch (10 x 10 and 20 x 20 cm). The smaller 4 x 4 inch tiles are more modular while the larger tiles have more space for individual designs. 
      Tiles in two sizes (4x4 and 8x8 inch) Endless possibilities 
      The system enables players to design entire Dungeons and Environments before the game begins. Players can create new rooms as they explore and the game unfolds. Players simply add tiles to their map, instead of having to stop, play, and draw new rooms while playing.
       
      The Epic Cards System includes: 
      Dungeon System with lots of modular dungeon tiles  Mine System with lots of modular mine tiles Path system  Village building system  Castle building system  Maze creator Hundreds of weapons, magic Items and object sticker Paper clips to attach the tiles side-by-side Epic Cards make it easy for you to play the table-top games you love, so now’s the time to bring Epic Cards into your favourite games!
      Epic Cards make it easy for you to play the table-top games you love, so now’s the time to bring Epic Cards into your favourite games! With your support of our Kickstarter project, we will make epic things happen!
       
  • Who's Online   29 Members, 4 Anonymous, 0 Guests (See full list)

×