Jump to content


Recommended Posts

So @Zink's thread here...

 

...inspired me to try my hand at creating an Elven catapult with Fusion 360 and my printer.  Rather than hijack his thread anymore, it's time to create its own thread.

 

I'm not anywhere near done, but I went ahead and printed out a prototype of my design so I could get a better feel for things and tweak it. Here is Sir ForScale checking over the construction so far:

15197657176306743138003122266400.thumb.jpg.eb3329485487bf98ae005f40d8451cb9.jpg

15197659108366993873420567016588.thumb.jpg.7d04970b1a06b9f843699006662212f7.jpg

 

I'm glad I decided to print out a prototype now.  I found that my tolerances are too tight for some of the assembly, and that I need to fix how the center piece goes in.

 

I could probably merge it all into one piece, and print it as a single piece, or maybe two, but I am trying to keep the pieces fairly flat so that it can be mailed in an envelope.

 

Trying to figure out what elven looking wheels without spokes would look like, as I think spoked wheels might be too delicate to print at this size

  • Like 9

Share this post


Link to post
Share on other sites

Like how it looks so far. ::): Maybe a bit small but resizing isn't that hard is it? I like the idea of having spoked wheels but understand you've got limits. Would it be possible to make a solid wheel with a bit of detailing to look something like these?

Image result for gw elf chariot

 

  • Like 4

Share this post


Link to post
Share on other sites

Hmm...

The decorations are too fine on those wheels to do, but a similar 3 spoke design might be doable. 

and now I want to to a chariot...

  • Like 4

Share this post


Link to post
Share on other sites
1 hour ago, kristof65 said:


and now I want to to a chariot...

 

Welcome to my world. See one thing which leads to wanting another and on and on. 

 

Even thick spokes based on something like this would look cool.

image.jpeg.418d116f52698601a84939d2cff3ba7e.jpeg

Wheel rim around the outside, fill in the middle of the leaves and add a hub. 

 

You've probably mentioned before but what printer are you using? I'm really interested in getting one sometime but haven't pulled the trigger yet yet. 

  • Like 5

Share this post


Link to post
Share on other sites

I have a Prusa i3 Mk2S.  I'm told it's capable of being tuned to finer details than I'm getting, but I haven't made the effort to tune it further, as I'm relatively happy with what I'm getting. 

 

  • Like 4

Share this post


Link to post
Share on other sites

I completely redrew this to upsize it, and fix some fit and construction problems  New prototype is on the printer now.

IMG_20180228_115616.thumb.jpg.11ad3ebfd44900390b53aa020cb5c4a7.jpg

  • Like 11

Share this post


Link to post
Share on other sites

2nd prototype print finished. The first prototype is in the background.

IMG_20180228_135821.thumb.jpg.41cb4ec9cb514a3030d495c5c8f05ac2.jpg

 

Sir ForScale is telling me I'm almost finished with it, and to just get it done.

 

I'm inclined to agree with him.  I only have a couple of pieces left to make it "workable" (in the sense that it will assemble, and be a reasonable facsimile of a catapult).

 

BUT...I'm growing increasingly unhappy with it. Why?

 

Because the perfectionist part of me wants to  spend the time to really polish it up and refine it as best I can, while the practical part of me just wants to finish it and get back to my Cowboy UV project.

  • Like 9

Share this post


Link to post
Share on other sites

I like it. There's always more little details a person could add but I think the only thing you really need is a roller at the back for pulling the arm down.

  • Like 1

Share this post


Link to post
Share on other sites

This is as done as it's going to be for awhile:

IMG_20180305_092352.thumb.jpg.62e026ab239580321fdd05bac02430bf.jpg

IMG_20180305_092359.thumb.jpg.2ac4e5b1869cfac20d652f3d927212f7.jpg

 

I enjoyed doing this just from the perspective of the learning experience and exploring mine and my printer's capabilities.

  • Like 13

Share this post


Link to post
Share on other sites

So @Zink got the catapult I sent him painted up - you can see it here:

http://forum.reapermini.com/index.php?/topic/82724-siege-accessories/&do=findComment&comment=1760353

I've also uploaded it to Thingiverse, using his photo - you can search for it by elven catapult or my forum name here. 

I only uploaded it this morning, and it's gotten 100 downloads already, which means it's fast on track to becoming my most popular design there - my most popular designs there have only garnered between 400-500 downloads each, and they were posted in Oct of last year. 

I may have to do more of these types of things. 

  • Like 3

Share this post


Link to post
Share on other sites

You did all the work but it still feels good to have a small part in this. Glad it's turning out popular. It really is a nice little catapult and it's sized perfectly for what I wanted.

  • Like 2

Share this post


Link to post
Share on other sites
1 hour ago, kristof65 said:

So @Zink got the catapult I sent him painted up - you can see it here:

http://forum.reapermini.com/index.php?/topic/82724-siege-accessories/&do=findComment&comment=1760353

I've also uploaded it to Thingiverse, using his photo - you can search for it by elven catapult or my forum name here. 

I only uploaded it this morning, and it's gotten 100 downloads already, which means it's fast on track to becoming my most popular design there - my most popular designs there have only garnered between 400-500 downloads each, and they were posted in Oct of last year. 

I may have to do more of these types of things. 

 

Once I get mine running & I know what I'm doing I'll have to try it out. Thanks for posting!!

 

RM

  • Like 2

Share this post


Link to post
Share on other sites
1 hour ago, Zink said:

You did all the work but it still feels good to have a small part in this. Glad it's turning out popular. It really is a nice little catapult and it's sized perfectly for what I wanted.

I never would have created it if you hadn't inspired me.  Given its apparent popularity, I may have to consider doing more pieces based on things I see people asking for here.  It might be time to browse through some of the "________ we'd like to see" threads.

  • Like 3

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MojoBob
      I found this model somewhere on the internet, alone and uncredited, so I have no idea who made it or what it is or anything. People have suggested that it's a Kirby, whatever that is, with a human face pasted on.

      I like it, and I'll print about a dozen of them, and make up some stats to use them in my D&D campaign in some way. I'm leaning towards some kind of waddling tar-baby critter, but we shall see.

      The original model was only about 1.5mm tall, so I've rescaled it by 1500% to roughly 20mm.
    • By Mckenna35
      Impact Miniatures ran a Kickstarter earlier in the year and this Mocking Beast aka Mimic was one of the offerings.  My wife enjoys playing D&D Online with me (she's good at the puzzles and spotting treasure) and finds the mimics amusing, so I painted this for her birthday.
       
      Mocking Beast face by Mckenna35, on Flickr
       
      Mocking Beast front by Mckenna35, on Flickr
       
      Mocking Beast back by Mckenna35, on Flickr
       
      Hard to tell it was 3d printed, other than very fine lines on long oblique items like the sides of the tongue.  All in all it was a blast to paint.  Based it on a Litko 3mm plywood 25mm round and painted the stonework on.
    • By MojoBob
      I made these primitive runestones in Blender and printed them on my little 3d printer. I thought the first one was a bit boring, so I added a bunch of skulls around the base of the second for that cannibal-headhunter vibe.

      They're on Thingiverse at https://www.thingiverse.com/thing:3010064

      The miniature is from Reaper, the figure I use to represent my oldest (surviving) D&D character from back in 1981, Smirnoff the Huge and Ugly. There was one earlier character from my very first roleplaying session, but I don't even remember his name — he was blown to smithereens in that same session by being too close to an overly-curious halfling thief.
    • By Darsc Zacal
      A new kickstarter from the folks at Westfalia coming in August.

       
      An interesting and somewhat different take on elves.
    • By NyarlaBcn
      The project I've been working on for the past two weeks: Ariel and Orion, queen and King of the wood elves from Warhammer fantasy setting. 
      Their background is quite simple actually, clearly inspired on Titania & Oberon of the fey people. Ariel is a mage, Oberon is the hunter. 
      I decided to paint them with opposite schemes: Ariel with an autumn palette (the flow of her dress made me regret it many times: it could have looked great in blue) and Orion with an spring one. Both are classic characters from Warhammer. Both metal models. Ariel's is really old: probably around 4th-5th edition; there was also an Orion model back then, but mine is the rework from 8th edition. While Ariel's original model shows its era aesthetics but it's still appealing, I thought Orion's original model was outdated and not that good. While painting them, Orion took a lot more time (a lot more), since it has a lot more detail. 
       

       










  • Who's Online   14 Members, 1 Anonymous, 0 Guests (See full list)

×