Jump to content

Orlando_the_Technicoloured

3D printable Sci-Fi Tanks by Duncan 'shadow' Louca Kickstarter

Recommended Posts

 

got a 3D printer, or access to a friends, or one at a library or university this might be for you


About


With this project I will be bring you a collection of Sci-Fi Vehicles and Artillery to be used in whatever tabletop game you choose. With more vehicles being added as stretch goals are hit. All sculpts will be supplied as 3d printable STL files.

Why am I doing this project?

My passions are sculpting, 3d printing and wargames. I wanted to be able to field the sort of armys I wanted without breaking the bank. So I started sculpting the sort of models I needed. After sculpting quite a range I decided to bring it to Kickstarter to enable me to further expand the range.

I have a Patreon page were I produce sculpts for my backers each month as well as a website where you can see some of my past work. So you can be sure I have the knowledge required to deliver printable files, and can be trusted to deliver them in a time frame.

Patreon: www.patreon.com/Duncan_shadow

Website: https://www.duncanshadow.com

Scale: The default scale of my files is 32mm / 28mm Heroic, but Being 3D Files they can be scaled up or down.


What do I get?

As soon as the kickstarter has ended and funds cleared you will receive 3d Printable files in a stl format. You can print as many of the figures on your home printer as you want, or send the files to a external printer to do the printing for you.

The kickstarter includes 7 vehicles 1 walker and 2 artillery pieces, with extra weapon options, (see below) to start with, more sculpts being unlocked in the near future.

0646b68d1b0456bdc99ef9b79daec542_original.jpg?w=680&fit=max&v=1518103927&auto=format&q=92&s=2215c923d42828e3503996a5008f587f

a2e1270922344a4df0984f549b3733f8_original.jpg?w=680&fit=max&v=1518105727&auto=format&q=92&s=c4495f428044ca47ac6bfd5376ce3ac9

Main battle tank comes with multiple turret, hull and sponson guns.

ffbf0f7473902f6c77c864a131e485f8_original.jpg?w=680&fit=max&v=1518106005&auto=format&q=92&s=b72543c5b5420b6e6794a83cbd438dd3

c78f0de4c17c0aec7b489ca0c545e018_original.jpg?w=680&fit=max&v=1518103541&auto=format&q=92&s=1d0f45c4cb61f39134dac5f8e34a0ee1

TERMS AND CONDITIONS. When you contribute to This campaign, you will receive STL files for the models as per your selected pledge. The pledge files will be delivered May 2018, with successful stretch goals arriving later. You can print these files for your personal use, but you may not sell the printed items for profit or distribute the digital 3D models/files to other parties.

  • Like 1

Share this post


Link to post
Share on other sites

One of those tanks looks surprisingly like a Leman Russ...  But like a tank actually SHOULD look like, instead of "hey, look at our exposed tank treads that are exposed all around"...  The flame tank looks rather looks to the Hellhound, and the APC looks pretty close to the Chimera as well, but with tweaks... 

 

Hmm.  Wonder if auperheavies like the Baneblade are on the docket too... 

  • Like 2

Share this post


Link to post
Share on other sites

Most of what's here has a fairly strong resemblance to GW vehicles.

 

 

  • Like 1

Share this post


Link to post
Share on other sites

update time, they're doing well

 

"Thanks everyone for making this project a amazing success already, and the campaign has barely begun. Hit 7 stretch goals so that's an extra 7 sculps everyone on the commander level tiers will get files for. Lets hope this keeps up so even more sculpts can be added :) 

Would really appreciate it if people could share the project with friends and people they think might be interested.  

Thank you all so much. 

Stretch goals
  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Gadgetman!
      I've been a fan of this comic for nearly a decade now... And now its finally going to end up in my bookshelf!
       
      https://www.kickstarter.com/projects/novil/sandra-and-woo-10-years-anthology-art-book/description
       
      About
      10 years! Over 1000 comics! One book! ... No, wait, two books!! (+ art prints) And I’m super happy with how they turned out!
      Update [11 November 2018] International shipping of the books is now available!! Scroll down to the chapter “International Shipping” for all the details!
      Sandra and Woo readers have been asking me for a printed version for years. Now, it’s finally here, the Sandra and Woo: 10 Years anthology! It collects all 1031 comics that have been published so far. Check out the following infographic for all of its features:
      I guess that almost all visitors of this page are familiar with Sandra and Woo. If not, here is a short introduction to the comic strip:
      Sandra and Woo is a comedy webcomic about love, food, raccoons and other important stuff. Written by Oliver Knörzer (“Novil”) and drawn by Puri Andini (“Powree”), it mostly consists of short story arcs about the adventures of middle-schooler Sandra North, her talking raccoon, Woo, and their friends. You can see some of our best comics on the following pages: [1], [2], [3], [4]. Here you can see six sample pages from the anthology (pages 19, 184, 265, 334, 444, and 547):
      6 sample pages from "Sandra and Woo: 10 Years" I carefully selected sketches and illustrations by Powree to fill the “holes” in the layout left by the irregular sizes of many comics. The anthology features a preface about the history of Sandra and Woo. Many of the comments below the comics include web links for further reading. Our editor Chris made sure that the English text contains no errors.
        But that’s not all! I also decided to publish an art book that collects illustrations of Sandra and Woo characters drawn by Powree and 50 other artists, The Art of Sandra and Woo. Most of the artwork by other artists was drawn as commissions or as entries for our yearly fanart contests. Check out the following infographic for the features of the art book:
      Here you can see six sample pages from the art book:
      6 sample pages from "The Art of Sandra and Woo" Powree and Fredy Siloy are currently coloring over a dozen drawings for the art book that have only been available in black and white until now. A few drawings will stay in black and white because they look better this way. I carefully arranged all illustrations so that all adjacent pages have a common theme, art style or particularly pleasing color scheme. All featured artists are listed in the preface. They will receive a fair share of the profits of the art book which they agreed to beforehand.
        The special editions of the books come with a sketch in form of a stencil, a good fit regarding the graffiti theme of the cover. For this, I will use undiluted high-quality acrylic paint and apply it to the interior side of the cover page with a sponge brush.
      Beneath the stencil, I will add my signature and my favorite catchphrase from the comic: “Freedom! Justice! Cookies!”
      Hand-made stencil inside the special editions Several reward tiers include the PDFs of the books. The PDFs will be DRM free. The resolution in each dimension will be half of the resolution of the original PDFs used for printing. As a little goodie, I will also include the PDF of our first book that was published in 2009, Sandra and Woo 1: The Woo.
       
      If you not only want to put Sandra and Woo into your bookshelf, but also on your wall, you can get a set of art prints (mini posters). The art prints are 17 x 11 in (43 x 28 cm) large and UV coated.
      The set of 5 art prints contains the following ones:
      The set of 11 art prints contains the ones above plus the following ones:
      All books and art prints will be printed by Ka-Blam, a print-on-demand comic book print shop. Over the years, they have shipped over 150,000 orders and printed more than 3 million comic books.
      I’ve received sample copies of the anthology and the art book and I’m very pleased with the print quality! I’m particularly fond of the black and white line art of the comics. The lines are sharp, have the correct thickness and no aliasing effects. In addition, the paper is thick and has a pleasant, slightly shiny, white color.
      Before receiving the sample copies, I was concerned about the binding of the 550 page omnibus. But the binding also makes a very solid impression. Therefore, I saw no need to publish the anthology in two volumes.
      My sample copy of the anthology Ka-Blam will also be responsible for shipping all orders. I’m sure they can do it much faster and better than I could. The anthology and the art book will be ready to be printed before the end of this Kickstarter campaign! If all goes well, Ka-Blam should be able to ship the first books just a few days after the end of this Kickstarter campaign.
      Note that the covers for the special editions first have to be sent to me so that I can add the sketch and signature. After that, I have to send the covers back to Ka-Blam. Since Ka-Blam is located in the United States and I’m located in Germany, this will add at least a month to the total fulfillment time. If fast delivery is your top priority, you should rather get the standard editions of the books.
      Why does the campaign last longer than the usual 30 days?
      The weeks before Christmas are always very hectic. Ending my first Kickstarter campaign right during the most stressful time of the year just didn’t sound like a good idea. I wouldn’t have been able to promise a delivery in December anyway.
       
      International shipping outside the U.S. is available for the books as well! These books won’t be printed by Ka-Blam, though. Instead, they will be printed by the well-known German print shop Wir-machen-Druck.de. They will then be sent to the backers by the German fulfillment agency Aimplify.com. The shipping costs of all reward levels are:
      Germany: 5€ (~ $6) European Union: 10€ (~ $11) Other countries: 15 € (~ $17) In comparison, sending the books from the U.S would have cost 46€ (~ $53)!
      The art prints are not available for international shipping since Wir-machen-Druck.de doesn’t offer this product category.
       
      The profits (after all expenses for printing, shipping, etc.) will be used in the following order:
      Pay the shares of the artists featured in the art book. Pay Powree for her work on Sandra and Woo and Gaia. Increase the prize money for the upcoming massive Sandra and Woo 10 Years Artwork Contest! Risks and challenges
      Since the books are ready to be printed and Ka-Blam is an experienced comic book publisher, the risks involved in this project are very low. I currently see the following risks:
      • There’s currently no backup plan for the worst-case scenario of Ka-Blam’s printing plant burning down (or Ka-Blam going bankrupt). In this improbable case, I would look for alternative printing companies located in the United States that could fulfill the Kickstarter campaign.
      • I don’t know yet how sturdy the plastic piece used for the stencil is. If it breaks (multiple times), this will lead to a delay of the special editions.
      • I’ll go on a month-long vacation to Japan from the mid of March 2019 to the mid of April 2019. In case we get a very large amount of orders for the special editions, this could lead to a further delay.
    • By NecroMancer
      https://www.kickstarter.com/projects/2036377947/samael-the-raven-demon-dark-whisper-the-chronicles/description
       
      I would say this is a dream; in particular, it’s a project born 3 years ago, initially as a role-playing game (written and played successfully) but now the most important characters in this setting will come to life for collectors and painters. Every month a new story will come out and it will tell the events in this world and the Background of the various characters.
      I want to create a series of high quality models with a thrilling story telling that is constantly evolving.
      The Dark Whispers project includes a total of 8 characters, the first of these is Samael, The Raven Demon.
       

       
       
    • By Smokestack
      https://www.kickstarter.com/projects/1327314385/barbaric-splendor-kickstarter-two-ophidian-menace/description
       
      Just saw this.
       
      Warning for snake woman nudity.
       
      About
      Barbaric Splendor Kickstarter Two: Ophidian Menace offers serpentman warriors for your wargame, skirmish game, RPG, or simply to paint and collect. These miniatures are not new - they are already sculpted and molds are already made. They were sculpted by Nicolas Genovese of Blood Moon Miniatures, who has made a special offer to Barbaric Splendor Miniatures. This Kickstarter will, if successful, fund this purchase and casting of the required amount of miniatures. I am offering the miniatures at a reduced price from their planned retail price to help facilitate this process. This will be a short Kickstarter, with the only goal to add these miniatures to the Barbaric Splendor line. If need be, I do have a stretch goal planned, but do not wish to make this a complicated project so it will not grow beyond that.
      These will be the start of an extensive line of serpentmen - both the serpentmen, who have human bodies and legs with snake heads (much like those in the fiction of Robert E Howard) and the primeval serpentmen who have snake bodies and human torsos with snake heads.
    • By Knight of the Dinner Table
      https://www.kickstarter.com/projects/1612773283/riders-of-the-storm-elves-dwarfs-miniatures-and-dr?ref=hero_thanks
       
      Interesting idea - you can pledge for either STL-files or "the real thing". Lots of things to choose from, I like some of the dragons and the houses ...
       
      EDIT: This KS NO LONGER offers "the real thing", but it's now STL-files ONLY.
       

       
       

       

       

       

    • By NomadZeke
      https://www.kickstarter.com/projects/portablewarfare/the-sergeant-20-miniatures-storage-bag?
       

       
      A minis/painting station transport bag from Portable Warfare with modular selection of foam insert trays. I'm interested...though I've never been one for the rigid transport cases (personal opinion) and hey mobile paint station possibility too.
  • Who's Online   40 Members, 3 Anonymous, 0 Guests (See full list)

×