Jump to content

Mckenna35

Scenic Grass Tufts and Flowers Kickstarter

Recommended Posts

On 6/1/2018 at 12:41 AM, Talae said:

Alright you guys win. I went for all of these plus the Muddy Debris Tufts.

 

Now that's rolling a 7 on a d6!  

 

On 6/1/2018 at 12:59 AM, Talae said:

P.S. 

My wallet hates all of you. No hard feeling, though.

 

The hating will continue right up until you start using them.  Mine at from other companies but tufts are one of the best scenery ideas ever!  Trying to do that with static grass is painful and messy.  I hope these turn out well and I will see them at retail.

  • Like 3

Share this post


Link to post
Share on other sites
21 hours ago, TheMandolin said:

I really intended to get some grass tufts, or irregular tufts but I ended up getting all flowers. 

I'm not certain, but you can snip off the flowers and still use the grass if you want. 

 

DH wanted yellow flowers and mossy irregular, and I picked spring mix and muddy tufts.  With the dry grass from a different vendor, and summer static grass I think we have a pretty good mix of choices now. 

  • Like 2

Share this post


Link to post
Share on other sites

I went for the Spring Mix, Warm mix, Black flowers, Purple flowers. 

Can't say that I've ever seen black flowers from anyone else. 

And purple because you can never have too much purple... 

  • Like 5

Share this post


Link to post
Share on other sites
On 5/31/2018 at 2:18 PM, Talae said:

Got my email, but can't decide at the moment. I may have to wait to choose.

 

So far leaning towards one of the following:

  • Mossy Irregular Tufts
  • Spring Flower Mix
  • Cool Flower Mix
  • Warm Flower Mix

I only pledged for one, so this is going to be tough.

I'm going to add one or two more, but i need to wait until mid month. I'm glad the backer kit doesn't close until July.

  • Like 1

Share this post


Link to post
Share on other sites

If I'd have known there was a BackerKit one could add more to I would have found a way to get in at even just the basic pledge, doubly so with it being an early July close.  Oh well, means waiting for retail.  I'll live ^_^

  • Like 1

Share this post


Link to post
Share on other sites

I ended up with Burnt Debris tufts (for western models), Black Flowers (for my Jutes horde), Mossy tufts, and Warm Mix flowers.  Have a feeling that I'll need many more when these hit retail.

  • Like 3

Share this post


Link to post
Share on other sites
2 hours ago, Dan d'Lyon said:

I ended up with Burnt Debris tufts (for western models), Black Flowers (for my Jutes horde), Mossy tufts, and Warm Mix flowers.  Have a feeling that I'll need many more when these hit retail.

 

About my thoughts too, but I can wait until then with my single pack of flowers. If I have a figure that goes "ooooh these would be perfect!" I know the option is there. 

  • Like 3

Share this post


Link to post
Share on other sites

In response to a question asked on the last update, they're currently looking at beginning fulfillment in August.  Couple months past the projected delivery date, but I think they got taken by surprise with how popular this ended up being.  They've also show pictures in the updates of the production versions of the flowers (which is all they've been making so far).

  • Like 3

Share this post


Link to post
Share on other sites

If their shipping location is Sheffield Lake, OH, I believe I will be getting a package by the 10th:) Sometimes Informed Delivery is useful:)

  • Like 4

Share this post


Link to post
Share on other sites

Aww snap. Mine may or may not be arriving in Oregon to my mom's place before I take my stuff from her garage to the great north. Eh, if so, no big deal. But I hope they get there before the 14th!! 

  • Like 3

Share this post


Link to post
Share on other sites
42 minutes ago, Cyradis said:

Aww snap. Mine may or may not be arriving in Oregon to my mom's place before I take my stuff from her garage to the great north. Eh, if so, no big deal. But I hope they get there before the 14th!! 

Well I am in California and mine says the 10th, so chances are good you'll get them around the same time:)

  • Thanks 1

Share this post


Link to post
Share on other sites

Got my shipping notice as well. Man, they pulled this off quick! I'm looking forward to seeing how they came out. Love projects like this.

  • Like 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Mr Effin
      Hello everyone we are venturing into the Kickstarter realm again with a fully digital to cast project. Warning this one is on the artistic nude side, so be careful if at work or sensitive area...
       
      "In the desert realm of Tharaa, summer’s heat lies as heavily upon the lavish court of the Sultana as it does upon the simple shops and homes of her subjects. Yet they are the ones who rejoice with the cool evening zephyrs that race refreshingly through their markets stalls, tents, and villas; breezes that never seem to reach the perfumed halls of the Sultana’s court. On those stifling, windless, near endless days; comfort, pleasure, and even mere distraction elude the powerful ruler. Her great wealth, her many servants, and her countless possessions seem more burden than blessing. On those days when clothing itself seems a pointless effort, the beauty and power of the human form acts as reminder that modesty can be a needless vanity..."
       
       
      https://www.kickstarter.com/projects/497254986/court-of-the-sultana-by-effincool-miniatures?ref=5vt7of
    • By Dan d'Lyon
      Didn't see a thread for this one yet, so....
       
       
      Sculpts by Roberto Chaudon and art by Danny Cruz.
       
      I backed simply to help a new company.
    • By Knight of the Dinner Table
      https://www.kickstarter.com/projects/1614906331/maidens-of-the-dragon-28mm-quality-pewter-miniatur/description
       
       
      only a small selection (namely four) of miniatures, but I like them and I also like the idea of using plywood bases instead of plastic.
       

       

       

       

       
      Base:

    • By Sae
      Sentinels of the Multiverse: OblivAeon
       
      The final Sentinels of the Multiverse Expansion adds a new mission deck in addition to new heroes, villians, and the use of multiple envirnments.
       
      The kickstarter also includes the compiled alternate hero cards, a complete hero foil card set, a collector's box, and a canvas poster.
    • By Gadgetman!
      About
      The concept for Mother of Dragons was born a few years ago.
      I still recall seeing the beautiful illustration made by Stéphane Wootha Richard posted on his Facebook profile and I fell in love with her immediately – I knew immediately that I wanted to bring her to life in miniature form.
      Fortunately, Stéphane was also very excited about the idea of a collaboration.
      We were inspired and driven to start working on the project that we both felt so passionate about and now, with much pride we can finally share this project with you all.

      What you see here required 2 years of committed development, during which time, our team has created and implemented many variants until we made of it a full range, indeed in addition to the varied scale of the main subject , you will find unique versions such as the bust or the lovely "super deformed" miniature. In fact, this is the characteristic of all of our Kickstarter campaigns — we always enjoy experimenting with new products and offering you something you've never seen before.
      Every successful kickstarter campaign enable us to share our dreams with the most supportive community in the world.

      In Mother of Dragons you will find exciting new figures as well as numerous artefacts (artefacts? – I hear you say. Exactly)! Be ready for an ancient Dragon Jar, or a real dragon’s tooth. One thing is certain. They will not be the only exclusives to catch your attention.

      Now with your continued help and support; it’s time to bring this project to life!
      So why support this project?
      Well, first because you’re a hobbyist and a modeller and you can’t wait to lay your hands on a new figure.
      Second, because the Mother of Dragons will also appeal to your collector’s side; she will be the “queen” of your showcase, no matter the scale, you choose.
      Apart from the main subject of this campaign, as usual, we’re offering great deals, rewards, add-ons and freebies, indeed Kabuki Studio places great importance to Kickstarter and for this reason the benefits/conditions offered will never be seen again outside the campaign, not even in the pledge manager/late backer's option.
       
       
       
       
       
       
       
       
       More views of our 1/8 Mother Of Dragons
       
       and some close-up
       
       
       
       
       
       
      In PDF format, you will qualify for guides related to your pledge’s scale; i.e. If you backed “Baby Dragon” pledge level, you will receive the painting guide for the 1/50 version; if instead you backed for “Dragon Host” you will receive them all. The artists in charge are:
      Riccardo Agostini (Italy) – 1/50 scale
      Keigo Murakami (Japan) – 1/24 scale
      Arnau Lazaro Azcarate (Spain) – bust (1/8 scale)
      Keigo Murakami (Japan) – 1/8 scale (full figure)
      You qualify for the guide even you have required the painted versions. Please be sure to provide a valid email address.

      No extra shipping costs for that reward. It’s a digital content. This is a FREE reward.
      A5 (21,0x14,8cm) print, each copy is hand numbered and signed by the character designer Stéphane Wootha Richard.
      Printed on a lavish hard-paper it will look terrific framed and hanging on the wall of your hobby room!

      No extra shipping costs for that reward.
      This is a FREE reward.
       
      Your support is awesome! We want to thank you by offering the awesome “Dragon queen” at a crazy price:
      KUBP16 Dragon Queen full retail price 30,00euro - vault price 15,00euro You just need to add the amount of money for the extra model(s) to your current pledge.

      Extra shipping costs, if needed, will be calculated at the end of the campaign through our pledge manager.
      This reward will be offered ONLY during the Kickstarter campaign
       
      This reward upgrade your Mother Of Dragons to a mini diorama perfect matching the original artwork.
      Get the dragon bones and dress-up your base!
      This reward is available for all the scales (but not for the bust), you will receive it accordingly to your pledge.

      No extra shipping costs for that reward.
      This is a FREE reward.
      Made of real beech wood, then hand finished and painted they are the ideal “frame” for your Mother Of Dragons; offered for the 1/50, 1/24 and 1/8 scale versions.
      Each plinth comes with a little extra:
      1/50 scale +5euro (plinth measures: 6x4cm 1,8cm height)
      1/24 scale +8euro (plinth measures: 14,5x8,5cm 2,3cm height)
        1/8 scale +19euro (full figure only, not the bust - plinth measures: 28x15cm 2,3cm height)

      You just need to add the amount of money for the extra items to your current pledge.
      No extra shipping costs for that reward.
      An awesome real metal tag to attach on your wooden plinth.
      We will create 3 different tags in order to perfectly match each one of the 3 different plinths.

      This is a FREE reward if you have the wooden plinth in your pledge. Otherwise you can buy the display background by adding 1euro to your donation.
      No extra shipping costs for that reward.
        EDIT: REMOVED €12000 Stretch Goal Picture.     Your support is awesome!
      You’re showing you really love our figures, so we give you access to a selection of 75mm models offered at a crazy price!

      KUB7502 Ky-rà full retail price 50,00euro vault price 25,00euro
      KUB7503 Dark Siren full retail price 60,00euro vault price 30,00euro KUB7504 Anne Bonny full retail price 50,00euro vault price 25,00euro KUB7505 Vixen Lord full retail price 50,00euro vault price 25,00euro
      You just need to add the amount of money for the extra models to your current pledge.

      Extra shipping costs, if needed, will be calculated at the end of the campaign through our pledge manager.
      This reward will be offered ONLY during the Kickstarter campaign
       
      A beautiful and useful pine wood box with sliding cover, measures are: 21x21x11cm that’s an ideal display solution for you 1/24 and 1/50 Mother Of Dragons also the 1/8 bust fits in very well.
      Each wooden box costs 9,5euro.
      You just need to add the amount of money for the extra item(s) to your current pledge.

      Extra shipping costs, if needed, will be calculated at the end of the campaign through our pledge manager.
       
      Taken directly from the original artwork it’s the ideal background for your Mother Of Dragons!
      Printed and die cut in order to fit the wooden box it will be the perfect frame for your precious model.

      This is a FREE reward if you have the wooden box in your pledge. Otherwise you can buy the display background by adding 3euro to your donation.
      No extra shipping costs for that reward.
       
      “It is said that few mortal souls ever dared to drink that foul liquor and that even fewer survived to tell about it!”

      This unique reward is made of a precious Japanese glass bottle.
      We will post the bottle empty and ready to be used with any liquid.
      The rear label will be customized with your name as one of the few mortals who drank it and still breathe.
      Due to the very particular nature of this item we can offer only one, it will go to a random backer (except for pledge level 1)
      This is a FREE reward.

      Extra shipping costs, if needed, will be calculated at the end of the campaign through our pledge manager.
       
       
       
       
       
       
       
      Community stretch goals unlock things on the Kickstarter campaign when we reach social media milestones.
      For example reaching a certain amount of supporters, or likes and shares will open up a new stretch goal.

      Everyone who backs the campaign is encouraged to take part in all the community stretch goals because the more people pledge in the Kickstarter, the more cool things people will get!
      PVC sticker “Mother Of Dragons” for all the backers.
      This is a FREE reward for all the pledge levels except the first.
      No extra shipping costs for that reward.
      KICKSTARTER EXCLUSIVE!
       
       
      What is this, and how does it work I hear you say?
      Well it’s simple. At some point during the campaign we will show some super-secret stuff that isn’t quite ready yet. You, as Kickstarter backers will have the exclusive first chance to grab some of this cool stuff.

      Any funds gathered from this boost will be added to the total campaign fund and will also go towards unlocking goodies for the qualifying pledges
       
       
      It’s simple, we need your support in order to fund the project and unlock all the amazing items we’ve designed!
      To donate, select a pledge amount and reward on either the right-hand side of a project page or after clicking the “Back this project” button and selecting “Continue”. From here you’ll be taken to a page where you can continue as a guest, or login if you already have an account.
      If you would like to continue as a guest, just enter your email address and select “Continue as Guest”.
      Next, fill in your payment details and take a minute to review your pledge details. When you’re ready, just click the green “Pledge” button and the job is done! Easy, isn’t it?

      During the campaign, thanks to your help, we will unlock several new rewards so you may want to review your current pledge, well how do you do that? To change your pledge amount, visit the project page and click the “Manage your pledge" button that appears next to your pledge amount and then select "Change your pledge" on the following page.
      From here, you’ll be able to adjust your pledge amount or choose a new reward tier you'd like to pledge for and your pledge amount will update automatically.
      If you don't want to receive a reward, select "Make a pledge without a reward" and enter your new pledge amount. Alternatively, you may change your pledge amount within the reward tier modal.

      Note: you are not adding to your existing pledge; the amount you enter will be the total amount collected if the project is successfully funded.
      Everything will be dispatched from Roma (Italy).
      You don’t have to be worried about customs tax because we’ll provide a special invoice for that purpose.
      All the pledges will be posted through DHL Express and the delivery time is brutally fast!
      18-24 hours for Europe
      2-3 days for rest of the world (customs clearance included)
      So even the delivery time is a “problem solved”.
      Average costs:
      up to 1kg to Europe 14.50 Euro
      up to 1kg to USA/Canada 19.50 Euro
      up to 1kg to Asia 31.50 Euro
      up to 1kg to Australia/South America 38.50 Euro
      We removed “Poste Italiane” from the carriers choice because the price difference is almost zero and the reliability of that carrier is particularly low, that means you could save 3 or 4 euro from shipping cost, but have great delays in your delivery or pay more in custom taxes, or even have the parcel lost.
         
  • Who's Online   14 Members, 2 Anonymous, 0 Guests (See full list)

×