Jump to content

Ironhammer

Converting a half orc ranger for my D&D game (warning, rather pic heavy)

Recommended Posts

So I had an occasion to create a new D&D character after a brief hiatus from playing, and I wound up rolling a half orc ranger named Logar Quickarrow, a vociferously proud member of the Bison Clan.  Naturally, being the conversion obsessed sort of person I am, I was obliged to fabricate a proper miniature for him.  I apologize for a few slightly blurry pictures, as I'm still trying to get used to my current camera (which is cleverly hidden inside my phone).

 

After canvassing Reaper's catalog for half orcs and various iterations thereof, I quickly decided that Skreed Gorewillow by Derek Schubert was by far my favorite.  It was merely a matter of transforming him from a spell caster into a ranger.

 

For reference, here is the miniature as it comes from the factory:

 

60190_w_1.jpg.2899034c4a1e6939a9ee752db570e6a3.jpg

 

The first step was to remove both the dagger and the burning flask and make way for his new weapons.  Rather than dig around in my parts bin for a matching set of new hands or sculpting a pair from scratch, I decided to simply bore out the existing hands and carve away all the pewter I didn't need and shape it to fit his new weapons.  My character uses a shield in his offhand in melee combat, so to reflect this I also cut away the front two flasks on his belt to make room for a shield which will be hung there.

 

185.thumb.jpg.74ca041a1f6d45372105b23330530324.jpg

 

Next, I dug around in my parts bin for some suitable weapons.  I found an appropriately aggressive looking sword blade which was orphaned from its moorings, however after trimming away a portion of the lower half and rounding it out with a file I created a shaft for it which easily fit inside the hole I had drilled in his hand.  I like my figures to have appropriately shaped scabbards for their weapons, so I traced out the outline of the blade onto a sheet of styrene and cut it out as a starting point for making him a matching scabbard.

 

192.thumb.jpg.711d7edda02c7d9d4001dbdee037f140.jpg

 

Next, I selected and appropriate bow and quiver.  I also dug out a small shield, as my character uses a shield in his the offhand in melee combat.  I drilled and pinned the quiver so that it can be mounted on his back where the figure's original sword would have gone.

 

195.thumb.jpg.49f77d7ebd8b32109ffd372290a805f3.jpg

 

After test fitting the shield, I came to the conclusion that it just didn't sit very well on the front of his belt.  So to cover up the damage I did earlier I simply sculpted a satchel where the flasks used to be.  I thought about cutting off the empty dagger sheath from the original figure and replacing it with a completely new dagger, however instead I simply sculpted a small nub at the top and called it a day.  The idea was that the dagger fits almost entirely inside the sheath itself, much like a dark age Seax or a traditional Finnish hunting knife.  At this point I've also drilled and pinned his feet in preparation for basing.  I've also tweaked the shape of his right hand by filing and carving it a bit more so that it closely fits around the handle of the bow I picked out for him.

 

211.thumb.jpg.28fb68ad6c6ae7a1670a920973b61b57.jpg

 

Next, I created a base using a very handy texture stamp made by Happy Seppuku.  Our campaign takes place in a rather wintery sort of place, so I will go back later and add some small piles of snow to reflect this.

 

214.thumb.jpg.3ec016ddc3e002a33512369e0757ab71.jpg

 

In an attempt to mirror the design aesthetic of his dagger sheath, I sculpted the sword scabbard to match with a raised bulge on top of a flatted base.  I left it otherwise plain, as I intend to hang the shield on top of the scabbard much like a medieval buckler. 

 

 

 

Next, I flattened out the nub of his sword with a pair of smooth nosed pliers to create a rough disk shape to serve as the basis for a pommel.  I also sculpted a flap on top of his satchel.

 

224.thumb.jpg.e4f9c9f038e3b42ca7ceaac013594bcd.jpg

 

I then sculpted a fairly basic hilt, using a combination of styles mixing a "viking" type crossguard with a later medieval style disk pommel with a peen block.  I also sculpted a small throat around the top of the scabbard to suggest that it is actually hollow on the inside

 

237.thumb.jpg.9ca544cc0085e316ce8c45f7de99b5cf.jpg

 

After test fitting the buckler, I realized that a portion of the scabbard was just barely visible underneath.  It was probably overkill, but I sculpted a rudimentary belt attachment to fill this gap (because I'm weird that way and can't let things like this go).  I then went ahead and glued the shield in place.

 

229.thumb.jpg.dee56345ba6ac55792fbf658c388a2f7.jpg240.thumb.jpg.e2cf4d6710c91dd7d9748a5d6efd44c5.jpg

 

I then glued the bow into his hand and glued the quiver on his back.  I had filed out the opening in his left hand specifically to fit the bow I had chosen for him, so it didn't take much to get it to fit snugly in place.  The bottom end of the bow rests directly against the lower part of the figure's clothing, which serves as a useful second anchor point for glueing (he is a tabletop figure after all).

 

243.thumb.jpg.92c7eb4fa0ac909f03b0256965f9f49d.jpg249.thumb.jpg.d457ed064b8a6c9a7feb505bb5cd4a68.jpg

 

For the final step, I took the last bits of putty I had mixed and put them in little piles on his base, which I then stippled to make them look like little piles of snow.  Next up is painting!

 

269.thumb.jpg.72dbb5af5adc607e738aade49de66c62.jpg282.thumb.jpg.02f4354d2e1aa3f1b45b098e0c2d3aa2.jpg

215.jpg

Edited by Ironhammer
Removed duplicate picture
  • Like 20
  • Thanks 1

Share this post


Link to post
Share on other sites

Good stuff!

This conversion really personalizes the character.

I like the commitment you have put in there.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By ChaoticBlues
      About
        The Origins of the Lost Lands
      For almost 20 years, glimpses into the world of the Lost Lands have been revealed in the publications of Frog God Games and Necromancer Games. The Lost Lands contain locations now legendary in the annals of roleplaying, from the depths of the massive dungeons of Rappan Athuk, to the city of Bard’s Gate, the Desolation of Tsar, the Blight, the demon-tainted Sundered Lands, the chaotic tumult of the Borderland Provinces, and the fabled Northlands. These publications offered hints of the sweeping scope, deep history, and epic grandeur of the Lost Lands.  But only hints.
      For well over a decade, a Lost Lands campaign world has been our customers' most requested project...
      ...and the time of the Lost Lands has now arrived!
      The Primary Reward
      Over 42 years in the making, this is the definitive guide to the world of the Lost Lands!
      This massive volume includes the history of the Lost Lands, a wealth of detailed maps, cultural information about its nations and peoples, and a huge gazetteer containing descriptions of the world's countries, cities, waterways and geography. For the first time, readers can explore the length and breadth of the great continent of Akados, including regions never before described, and far Libynos, home of the Desert Kingdoms and many ancient cultures alien to the folk of Akados.
      The book weighs in at approximately 700 pages in full color, with maps by award-winning cartographers and beautiful, original artwork to place you directly into the world itself in all its glory and terror.
      Entirely system-neutral, the guide can be used with any game system you choose.
      The Lost Lands are the setting for a tremendous array of over 150 individual adventures and sourcebooks already published by Frog God Games and Necromancer Games, many providing statistics in multiple game systems. All of this material is available to provide an almost inexhaustible resource of ready-made adventures and epic quests! Future Frog God Games products set in the Lost Lands will be built into the ever-growing canon finally revealed in this volume.
      About 4000 example pages of Lost Lands Adventures Pictured Above A small sample of some of these already-existing adventures include Rappan Athuk, Sword of Air, Slumbering Tsar, Bard's Gate, Necropolis, Cyclopean Deeps, The Borderland Provinces, The Blight, and Cults of the Sundered Kingdoms.
      Authors of adventures which have, over two decades, explored the Lost Lands include Clark Peterson, Ed Greenwood, Bill Webb, Gary Gygax, Matt Finch, Jim Ward, Morten Braten, Jeff Harkness, John Stater, Bill Kenower, Nate Paul, Dennis Sustare, and Alex Kammer.
      The authors of the guide to the Lost Lands include Bill Webb, Greg Vaughan, Matt Finch, Vicki Potter, Pat Lawinger, Anthony Pryor, Rhiannon Louve, Mark Greenberg, Ken Spencer, Casey Christofferson, and Thom Wilson.
      Shipping
      International shipping on a book this size may be quite expensive. If you are a non-US customer, please read the shipping information below. We anticipate shipping to be $80 to $100 for most countries, and could even be more. Shipping for the tapestries (and only the tapestries) is calculated into their price for Canada, the UK, the EU, and Australia. 
      The Lost Lands
    • By Loim
      I started this conversion a loooong time ago for a friend who needed a dorf with an axe, and I did not at the time have a dorf with an axe. I was never quite happy with it, and the game died quickly. I forgot all about this little guy until recently, and I decided to finish him, and queue him up for the paints. I initially started with a clay weapon sculpt, but while I was fiddling with it it broke. In a fit of rage I cut a piece of aluminum stock and after a few hours of shaping we got here. I did a bit more shaping after this photo, and I plan on doing a bit of Apoxie Sculpt to blend in where the old weapon was cut away. For the surgery I used a #11 Scalpel. All the shaping was done with a #8 Double Cut Mill Bastard and diamond files. 

    • By Rigel
      An elaborate sculpt, overflowing with detail in the Pathfinder fashion. (I swear, at least one of their artists must have a Thing for buckles and straps). Jigeke here has an excellent mask and a very long spear, a diverse collection of severed hands and paws, and a patchwork kilt of many kinds of hide. I know there's zebra and giraffe in there, and leopard as well. 

      It's Robert E. Howard's birthday today, and without him we probably wouldn't have the Barbarian class as a thing (see: Conan the), or Serpent-folk as insidious infiltrators (see: Kull), or puritan monster-hunters (see: Solomon Kane) as pulp/fantasy tropes. So it seems good to commemorate him with a guy who could be a good stand-in for N'Longa, Kane's sorcerous blood-brother and recurring ally. 




    • By Brianuk
      Converted Gregor the Wizard, who is a druid type character, well wrapped up with a bird as a familiar. I thought the model would look good as a female character and the way the coat bunches up means that a conversion looks OK, in my view. I just cut off the head with a razor saw and swapped it with a reaper bones head for Drys the Dryad. I just stuck it straight onto a blob of green stuff. I didn't need to do much texturing because the beard on the original male model just looks like a scarf following the sawing.
       
      The mittened hand holding the bird just got accidentally bent back while I was sawing the head off (is this forum externally monitored?). It wasn't an intentional part of converting. 
       
      Then a pretty simple paint job, have done the washes in these pics and need to do some basic highlighting and a winter effect on the base. 



    • By dks
      I am playing in the Pathfinder "Ruins of Azlant" Adventure Path campaign.  A few of the PCs have some healing magic, but we didn't have an actual cleric until a PC recently took the Leadership feat, and an NPC cleric joined the party as his cohort.   (Click here for the Show-Off thread about the figure that I use for my character.)
      The new cohort-cleric, Father Kurvis, is middle-aged and acts like a curmudgeon but has a kind heart.  He worships Abadar, the god of cities, law, merchants, and wealth.  Abadar's colors are gold and black, and his holy symbol is a golden key.
      Our GM has an extensive collection of prepainted plastic figures (D&D and Pathfinder), and this Village Priest seemed appropriate.  It is from a 2005 D&D miniatures release.   I offered to repaint it to be specifically Kurvis.
      Two hours of slinging paint got me to "finished" ... and after I took the first set of photos, I saw how bugged and asymmetrical his eyes were, so I just spent a few more minutes touching them up.
       
      Before and after:
       

       

       
      Enjoy,
      Derek
       
  • Who's Online   26 Members, 3 Anonymous, 106 Guests (See full list)

×