Jump to content

Sign in to follow this  
SamuraiJack

The Fourth Android Collective! Back With A Vengeance!

Recommended Posts

 

 

About

3b7a53fc171d31eb24b7fbe7133604e8_origina

The Fourth Android Collective

 Welcome to the launch of The Fourth Android Collective.

This campaign, if successful, will see the expansion of the Android range of miniatures produced by Blind Beggar Miniatures,

This Fourth Collective of Androids will offer some of the more extreme versions of the 'Andy' Series, with a new selection of models which show how the Andy series can be customised for almost any role..

3b7a53fc171d31eb24b7fbe7133604e8_origina

The 'Andy' Series....

The 'Andy' Series are based on an original design first conceived and created by Andym Industries (the MK1).

This original design was acquired by the BB Corporation where further research and development saw this pattern evolve into a range of models with differing specifications.

There are currently already twenty different models in production in the 'Andy' Series, This campaign will, hopefully, see the introduction of several more.

3b7a53fc171d31eb24b7fbe7133604e8_origina

The New Models....

The new additions that the BB Corporation would like to put into production are the Mk's 21-26 shown here:

7bed69e7ef913f6ccf0f0546d171a26a_origina
e2cf4f9e8eb91c48af64fdc101fc39d0_origina

Details of the new Models and their functions will appear in regular Updates.

3b7a53fc171d31eb24b7fbe7133604e8_origina

The Mk 27 Stretch Goal...

 Should the Funding Level reach £1200, the Mk 27 will be added to the Fourth Android Collective, taking the total of models in this Collective up to seven.

d22e3e4114b5fa9f9938e983ef62172b_origina
3b7a53fc171d31eb24b7fbe7133604e8_origina

The Earlier Collectives.

Here are the miniatures from the First, Second and Third Collective campaigns.

Any, or even all, of these earlier Collectives can be added to your Pledge parcel if you wish.

The Original Android Collective, featuring Mk's 1-7,

03dfa6f03f7c3be88ca6bee89a42667d_origina

To add the Original Collective to your Pledge, add £22 per set to your total.

The Second Android Collective, featuring Mk's 8-13 (also includes 'Barker', the Android dog, not pictured).

fe1a3d3421f98e7c2cce96f04b22e8b5_origina

To add the Second Collective to your Pledge, add £23 per set to your total.

The Third Collective featuring Mk's 14-20.

71ce705a3404f88a0365f9ed1af43ac7_origina

To add the Third Collective to your Pledge, add £25 per set to your total.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By kodiakbear
      https://www.kickstarter.com/projects/dwarvenforge/caverns-deep-by-dwarven-forge-handcrafted-game-ter/description
       
       
       
       
       
       
       
       
      If anybody here loves cavern terrain and missed DF's first cavern KS KS2, this spring/summer around June DF will have KS6. The theme of KS6 will be Return to the Caverns and should be great fun for those who took part in KS2 or those who are new to DF.

      DF had this to say and showed the below teaser pics

      We're doing for Caverns what Dungeon of Doom did for Dungeons. A whole new batch of fun pieces to enhance your existing collection, but also completely stand-alone.

      Some of the key features:
      New Core Shapes (diagonal wall, convex curves, 1" pieces, etc)
      Passages
      Elevation (with stuff that's impossible on graph paper...)
      Negative Space pieces (and new Terrain Trays)
      Flashy Pieces (Magnets & LEDs)
      Large pieces (4x4 and larger)
       

       

       

       

       

       
    • By Gadgetman!
      Arr...   
       
      https://www.kickstarter.com/projects/656177818/pirates-of-treasure-island
      About
      DEAD MAN'S CHEST
      Squire Olsen, Dr. Edwards, and the rest of the EOE gentlemen having asked me to help promote the whole particulars about this Treasure Island Kickstarter, from the beginning to the end, keeping nothing back but the bearings of the Casting Room, and that, only because there is still castings not yet purchased, I take up my pen in the hope of being paid by John in the year of grace 2018, and go back to the time when John first presented his plan for this Kickstarter and the stained old Salesman with the sabre cut first took up his lodging in the EOE Office. I remember him looking over his desk and whistling to himself, then breaking out in that old Casting Room Pirate Song:
      “Fifteen men of a dead man's chest, Yo ho ho and a Pirate Kickstarter, Drink and the devil had done for the rest, Yo ho ho and a Pirate Kickstarter”
      The first 4 sets include all the named Characters from the book.
      THE TOUGHEST OLD SALTS
      The 5th Set includes the Characters in the book that were not named. I have taken the liberty of calling them The Toughest Old Salts.
      "We got together in a few days a company of the toughest old salts imaginable--not pretty to look at, but fellows, by their faces, of the most indomitable spirit.”
      THE BLACK SPOT DEAL
      "...But what is the Black Spot Deal, John?", I asked.
      "It's a Rare Deal, Mate. People keep their weather eye open for such deals, then buy them on their honor.  
      People who is smart as paint is likely to lose their dead lights if they don't see how good this deal be. A collection of the finest Pirate's Pewter. 30 Dirty Scoundrels, Monkeys, Artillery, Barrels & Treasure Chests and even Captain Flint himself"
      Why are you talking like this John? "Yarrr, I dunno" he replied  
       All miniatures 28mm scale and are cast in fine Pewter. Miniatures are supplied unpainted and a few require a little assembly.
      Risks and challenges
      The Major challenge is time
      Most of the design work has been done eliminating the lion's share of work needed for pre-production.
      We are working with Fortress Figures to do the Molding and initial casting. Jeff and Ben are highly decorated Veterans of the Kickstarter industry and have over a hundred successful Kickstarters under their belts!
      I am very confident that we will meet all deadlines in plenty of time.
    • By odinsgrandson
      The Homestarrunner folks have a kickstarter up for Trogdor!! the Board Game.

      There is an option to get the game with some cute meeples, or a set of miniatures.
       
      https://www.kickstarter.com/projects/1999933720/trogdor-the-board-game?ref=gamesnewsletterJul1818&utm_medium=email-mgb&utm_source=games-newsletter&utm_campaign=games-07182018&utm_content=link
      Anyone think they can make those minis look really good?  It is certainly a challenge.
    • By Orlando_the_Technicoloured
      https://www.kickstarter.com/projects/russrmc/animal-adventures-tales-of-dungeons-and-doggies/description
       



      So you have seen the minis but what about the rules doc? Well, here is just one example of the art quality thanks to the incredible talents of April Prime! Amazingly, this is still work in progress, but she is working on art for every dog and a few bonus pieces as well....hmmm..maybe art prints should be available...


      Here's a small piece of Dungeons and Doggies fiction to enjoy! Every mini will have an associated 'icon character' pre generated in the rules pack,and for the Cleric role we have Cerysse, gentle but determined protector of her friends. Many thanks to Kate, our writer, for providing this and many other story pieces for the project! We will follow up with a rules preview for the Companion Domain soon!
    • By beefcake
      Hi all, 
       
      I feel a bit bad that this is my first post here on Reaper Forum advertising a kickstarter. I used to go by the Moniker Kaybee or Kaybee81 (can't remember) but as I'm known as beefcake on other fora I thought it best to go by the same name everywhere. Anyway here is a link to some STL files for purchase.


      The Wizard's Tower contains stackable tower sections to create your own unique Wizard's Tower. 
      Files have been scaled for 28mm miniatures but, as with all 3d printable files, you have the ability to scale them up or down to suit your gaming needs.
      The initial reward consists of 7 different modular tower pieces and a ladder. All of which have been created on Blender, run through a repair tool, to check for any non-manifold parts and other errors, and printed.

      [li]Tower roof[/li]
      [li]Single window tower section[/li]
      [li]Tower section with door[/li]
      [li]Tower bridge (2 bridge sections link together)[/li]
      [li]Double window tower section[/li]
      [li]Windowless tower section[/li]
      [li]Tower base[/li]
      [li]and a ladder[/li]

      [/li]
      [/list] All for NZD $10 (roughly USD $6.80)
       
      The tower pieces can be oriented in almost any direction to provide a different look each time you game.
      https://www.kickstarter.com/projects/1173449368/the-wizards-tower-3d-printable-modular-tower-syste
  • Who's Online   25 Members, 5 Anonymous, 0 Guests (See full list)

×