Jump to content

Caleb

Bones Supporter
  • Content Count

    50
  • Joined

  • Last visited

Everything posted by Caleb

  1. I was so confused when I tried to pledge about 20 minutes ago and there were no options. Then suddenly waves 5-8 were there AND someone dropped their wave 3 pledge so I grabbed that! Dang so now I am in on Wave 3! Good times.
  2. "Your Bones 4 Kickstarter shipment has received postage!" Oh man. I am really looking forward to the Dreadmere expansion. Really goes well with the campaign concept I have in mind.
  3. I have a great deal of enthusiasm towards Reaper Bones Miniatures.
  4. Update video on waiting for the Reaper Bones 4 Kickstarter. https://youtu.be/xvz4balCnxk
  5. I was very happy with the earlier dungeons and doggies Kickstarter so I backed this as well. I recently did a video about the dogs. https://youtu.be/6gEwd22j3dI
  6. I have had mine primed and painted for a couple of days and there has been no issues. Here is my full video review. https://youtu.be/SR-g8mifZRM
  7. Kringle the puppet is very helpful, you just gotta ask in the right way.
  8. I take a look at different methods of priming Reaper bones for durability. And there is a puppet. https://youtu.be/ZaqOulF6tm0
  9. Ooooh it's time to start speculating! All that PVC sitting in my living room is gonna be worth millions! I missed out on Bean Babies but I am gonna be on the ground floor for this one!
  10. Has anyone talked about cleaning the Bones off with 90% rubbing alcohol after normal washing? That has been the process I have been using lately and it's worked out pretty great! For far either Vallejo Surface primer or just plain Reaper HD seem to work the best for durability. I still haven't had a chance to test out some primers but I have just not had any luck with spray primers and I am going to limit any further tests to Brush on. I did a video on it!
  11. Hello! So my YT channel was really focused on cheap miniature videos and whatnot but I think I need to expand my base a bit. I know I am not the best at painting but I could try some painting videos now that I have my Reaper Bones 3. Also I have been doing more vlogging stuff lately. Not as popular as my miniatures content but still a mostly positive response.
  12. With Bones stuff my priming experiments have pretty much shown that liner, no primer or Vallejo brush on primer work best. I had one really nice spray day with Army Painter grey that worked out well but that was under optimum weather conditions that I haven't been able to replicate. I have also had good luck with slightly diluted Vallejo brush on sealer matte sealer to help protect the minis.
  13. 3rd thing I tried. 2 different spray conditions. Did not work. First attempt seemed to work fine and I painted. Paint flaked off by merely picking up the minis. 2nd attempt in letting it dry for several days it just flaked off with a handling test. Other spray primers included Testors Dull Cote, Krylon Primer, Army Painter Primer and glossy outdoor furniture primer from the hardware store. I honestly think anyone who says they painted these specific skeletons without the paint flaking off are simply lying or barely touched them after painting them. Or they might have gotten
  14. Wow thanks for all the great responses! It was just such a weird suggestion I briefly wondering if there could be anything to it. I doubt hairspray would be useful in anything I would want to do. And certainly I wouldn't recommend those God forsaken Tim Mee skeletons to anyone. They are most certainly made out of something that won't take paint and I don't feel like sandpapering them. I think a lot of the people who have said they painted them didn't actually try to handle them for use in D&D or simply omitted the fact that the p
  15. Hey! So I did a video awhile back discussing the issues with using very cheap minis in terms of not being able to prime them properly. (My point being that it's sometimes better to just spend a bit more money to get miniatures that were made to be painted than to waste time with cheap miniatures that will never be able to handled without the paint flaking) I got a batch of those Tim Mee skeletons where I used EVERYTHING to try to paint them. Literally everything I ever heard of excluding car primer and minwax. I assumed they must have had mold release in the actual plas
  16. As always it ended up looking goofy. I wasted a bit of rubber mold because I was using a plastic container that was too big. Take a look at my process in the video below. Overall using foamboard for the mold was a messier solution but those cubes looked better. https://youtu.be/xILQoipjfSM
  17. So the liner stuff still seems to be the most popular method of "priming" Bones. In my own tests it seems like a coat of HD seems to stand up to the thumbnail test a bit better. But maybe I will mess around a bit more with liner considering everyone else has had good luck with it. So far the pathfinder goblins have taken the most punishment of all my reaper bones and they were base coated with HD and sealed with two layers of watered down brush on acrylic.
  18. I did a test where I painted one bones with Reaper brown liner. (newer bottle) Then I did another with red RMS HD. I tried the thumbnail scrap on both of them. The Brown liner came off much easier than the red HD. I will finish painting them and give them another fingernail test or maybe just leave them with the prepainted miniatures in the travel case. (A fate worse than death!) So far it seems like diluted vallejo acrylic varnish seems to be the best protection. It's 100% acrylic resin so I don't know how it could react badly to anything. The varnished bones pathfinde
  19. So I have been looking around and it seems like the consensus is that washing the bones and then using straight RMS HD or Reaper liner is the best option. I actually tried the older red liner and was able to scrap it off relatively easily. But regular HD paint didn't. I will have to do more experiments once I get some newer brown liner that everyone seems to favor.
  20. Hey I took some of your suggestions and made a quick video about Legendary Encounters.
  21. I dunno. I tried regular Krylon primer and it's hit or miss when it comes to plastics and PVC. But apparently this has plastic fusion? And is specifically formulated to be used on plastic parts. I can't wait to try it out on some of the Tim Mee cheap cavemen and skeletons.
  22. Huh. So that just weird that with all the discussions about Bones not priming that nobody is talking about this product. When I bought from Amazon it was a $5 add on item. I will have to maybe try it out.
  23. So this stuff seems interesting. I wonder if it would bond with bones? I know for a fact that most other Krylon brands do not at all. It's still too cold here to try a can out. Has anyone else used this stuff? https://youtu.be/O5Re9jTuWPk
  24. The best results I got were from diluted acrylic matte Vallejo varnish. The brush on stuff from small bottles. My pathfinder goblins have been through heck and back and none of them are missing any paint. but again I dunno. It depends I suppose. I have spray sealed some bones and some of those have had terrible flaking afterword. But it could have been a lot of things. Larger bones just don't seem to need any sealer or varnish. I probably won't bother with spray on sealer and maybe varnish a few select minis that will have heavy use. I want to know what kind of GOD pain
×
×
  • Create New...