Search the Community
Showing results for tags 'chaoshead'.
Found 3 results
Hello every body, this will be here not to show off anything amazing or impressive. Just something that took me five and a half hours to do. Nothing to impressive or anything like that. Its a fairly simple paint job for this old miniature. It has been sitting on my portable painting desk for many years now, and I felt like it was time to finally paint it. So I could use it in Dungeons and Dragons if I ever played a Dwarf again or just to use in anything with Dwarves in it really. With the new system of being able to upload photos straight to here from a device, it may be a little weird. I have never used the new Reaper system for photos so lets see how it works. I will still be explaining everything to the best of my ability. All of the paints i used besides one were all Reaper Paints. So, lets get started. Okay, so these four photos are of the Dwarf miniature as a whole. I had to paint over the entire mini with black because it had taken some damage to the prime that covers it. After i had painted the entire thing I let it dry and took the pictures so I wouldn't forget to take them. Next I painted on the metallic colors that i knew i was going to do and I could see. This included the small amount of Chain mail showing under his massive beard, the large Warhammer and his shiled. These were done first in Shadowed Steel. Then I did the few detail pieces that I wanted in Antique Gold. After I painted those few things I realized that I hadn't painted the Rune Stone he is standing on. So I quickly mixed up a wash of the color... well Stone. I forget who the Stone wash is made by but I added some water and I think Glaze Medium. Chaoshead will yell at me in the comments to tell me i'm wrong since i was using most of his paints. Anyways, I did a couple of coats of the Stone wash and moved on to let that dry for a while. While I was letting the Stone wash dry I went on to other colors. I pulled the Rainy Grey out to do the fur that lines the inside of his cape, not realizing I had missed some it will show up later. This step was fairly easy when I was painting it on, but then again the entire thing to me seemed easy and I don't really know why. After the inside of the cape i moved on wards and started to paint Leather. I used Ruddy Leather for anything leather on the Miniature. I started with the gloves then moved on afterwards. Alright, in these few photos I painted more leather onto his sleeves, belt pouch, boots and the bottom of his Chain mail shirt. This step frustrated me because I accidentally painted over some of the metal, so I had to go back and paint the metallics again. I then moved on to some detail work that may have taken the most time to do... I think. On the Rune Stone, I used Breonne Blue to add some color to the... Stone. XD I wanted to paint the runes from the beginning of this small project. I think the Breonne was a good choice for the runes in the first place. Here I had finally painted his massive beard. I used Mahogany Brown for his beard since it was the only one within my small amount of paints that would work. I liked my choice of color for his beard though. In these three i painted the trim of the cape with the Ruddy Leather. I painted it very carefully to make sure I didn't get any on anything else. I already had to repaint Metallic colors earlier and i didn't want to do it again. Continuing with the cape i painted it Leaf Green and had to do it a couple of times to make sure it was one solid color. Painted the face with Tanned Skin and then used Grass Green to paint his eyes. Again this is all just a super simple paint job for this mini and is just meant to be a good, fun, little thing I like to do. As a final thing to finish this Miniature off was a nice little touch that I thought of last second. I painted the small heart on his cape with Blood Red. The Dwarf is done! He is done in all of the simplest ways to paint that I know how. XD If you all enjoyed and have some tips or anything to leave for myself. Please leave a comment and i guess stay tuned to here or another one I post in the future.
About twenty years or so ago a game came out that I fell in love with, a game that touched my inner Ork and spoke to me in a nice simple language that I could easily understand. A game of Orks and vehicles, white knuckle speed and vicious combat, mutants and huge explosions all set in an arid desert wasteland. What's not to love, right!?!? That game is GORKAMORKA! Anyway, my son, who is younger than the game by a few months, recently watched a few videos of the game on the mwg youtube channel and decided "Hey Dad, we should play a Gorkamorka campaign." "We have no terrain or vehicles for the game anymore." I said calmly, trying to hide my interest and excitement thinking this would just make the subject go away because even though I love the game, this immediately raised a red flag of me building a ton of terrain and vehicles while everyone else just got to play in the end. "We would literally have to build everything we needed. So unless you are going to help with every single step along the way, its not happening." I figured that would be the end of it because he is not a big fan of the building process, just the playing process. There was a VERY brief moment of silence and then, "Okay....what would we have to do?" We sat down that night with the books, looked at game pics and desert pics on the web, watched some of the videos on youtube from the mwg guys and made a list of scenery that we would need to play the game. Flash forward about two weeks to two days ago when we find ourselves in one of the local home improvement stores and end up coming home with most of what we need as far as the main supplies go. Two 2' x 4' x 1/4" sheets of mdf and one 4' x 8' x 1" sheet of insulation foam. That night we laid out the rough ideas we had for the two cliff faces, this took quite a while actually as I kept going back and forth between depth of protrusion onto the board and playability. I wanted them to not take up too much room but still have enough space on top to maneuver small and medium vehicles while larger ones may only be able to go in a straight line. Each cliff also needed a single ramp for vehicle access. The following day we sketched out the bases for the rest of the larger terrain pieces. I had to remind him that we didn't want to waste the material so we needed to cram as much as we can onto each board. Today we were both off so we decided to spend it working on terrain. First thing we needed to do was to cut out all the bases. An extra piece of mdf from an old project was also turned into a dune. Next we laid out all the bases onto the foam and traced all the shapes, making sure we had enough space to get everything on took some rearranging but we managed it. By a very huge bit of dumb luck when I scored the sheet of foam and broke it in two, so we could get it in the van and home, I made one piece slightly larger than the other. While at the time I was a little bit upset at myself for not bringing a tape measure, this ended up working perfectly. I am not sure had it ended up in exactly half that we would have been able to get everything on the two sheets half sheets. We then cut out all the foam shapes and laid them out onto their respective bases to see what we ended up with. And the extra dune. The space shown is a 4' x 4' chunk of the game table, I think we did pretty good on not wasting the mdf. The bases without foam are not getting a full level, just a small ring around the edge and will represent the tar pits, mine and chem pool. The dunes were all attached to their bases with liquid nails, weighed down and left to dry for the night. That's where we are now, not too bad for one day really. We both had fun and he is already talking about getting a trukk and chopping it up to make it into a lower riding trukk to run over my grots...because I guess that is what I am playing again...probably, I like the little underdogs.
Last Sept my son came to me and said, "We should play some Gorkamorka." "Not going to happen," said I, "because we have nothing except the rules and a few of the models needed. So unless you are planning to help me build all the terrain needed and buy and build mobs it isn't going to happen." I pretty much thought that was the end of it. Without missing a breath he said, "Alright, let's do it." "Shi*." was all I could get out of my mouth. For those of you that may have missed that, here is that topic. After that we needed to start building mobs, here is the build of the diggas. Gorkamorka is a game by gw from 1997, that's the same year my son was born, the game is older than him by about six months or so. It is a game of vehicular combat that pits orks against orks in a never ending struggle for dominance of a desert world under the watchful gaze of the ork Gods Gork and Mork. There are other mobs in the game, thanks to the Digganob expansion, these include muties, rebel grots and diggas. What's a digga you may ask. Well, they are humans that think the orks are the greatest thing they have ever layed eyes on. With that in mind they strive to be just like the orks in every aspect of their lives. Alright, with some backstory out of the way, let's get on to some painting. Here are all of the diggas primed black. This is WAY more than I will ever need for a single mob, in fact it is probably enough for two mobs but having this many gives me good variety for the game. I will be painting these in small-ish batches of 4-8 or so. I am aiming for just over tabletop quality with these, now that means different things to different people so here is what I mean by that, solid base colors with shading or a wash followed by bringing back the base color. Sometimes I will give a few pieces a highlight but that is usually limited to characters or center pieces. That's pretty much what I am aiming for here so nothing fancy. Here are the first batch, a yoof and five boyz, just random picks out of the pile is how this is going to go. Ignore the impetuous yoof with a layer of flesh painted, he forgot how messy it is to paint ork metal....well, at least the way that I paint it. Here is the first step of the ork metal recipe, tinbitz...well, that is what it use to be called, and still should be, but now it is, umm....warplock bronze.(I had to go look at it because I really had no idea what it was called.) It is a nice dark chocolate brown metallic color. Next step is a fairly heavy drybrush of some sort of dark metallic paint. I use to use boltgun metal but I no longer have that so I went with blackened steel. Next was a drybrush of shadowed steel. Last step for the metal, for now, is a light drybrush of polished steel. This is pretty bright for ork metal but will be brought down a little by the wash. I forgot to take pics of this step before moving on to the skin so these pics also have the first layer of the skin done with rosey skin shadow, I am hoping that in the end this will give them a slight look of too much sun. The light and natural light were giving me some weird colors, one of these is probably close to how they really look... That is where I left these for the day, the skin needs another layer before we move along to painting all the clothing and pouches.