Search the Community
Showing results for tags 'How-to'.
Found 1 result
A lot of times, I see people asking for advice on how to do a conversion, or expressing uncertainty about having the skills to do one. So, I decided to create (what I hope will be) a helpful topic to cover that area. I'm aiming this primarily at beginners, or those that 'don't think they can', but hopefully everyone will find something useful or interesting here. First off, let's dispel the 'I can't/I'm not good enough' myth. Nonsense! If you can operate simple mechanical devices, you have all the skills you need to perform simple conversions. It's easy and fun, all it takes is some practice. Just remember, you're going to want to practice on some inexpensive figures before you start in on anything really crazy. Bones figures are great for this. So, here's what you'll need: 1.A hobby knife with a new blade--new blades are easier to use, and safer. Caution: these are sharp, please be careful. 2.Some green stuff, or whatever type of sculpting putty you prefer. This will be used for filling gaps and/or sculpting new details. 3.Some victims volunteers figures you want to convert. In this case, I'm going to be using some Bones Goblins (remember the practice on inexpensive figures part?) for 2 reasons; they're cheap, and I have a horde of them and don't like having a bunch of clones on the table top. 4.Super Glue; the stuff in my picture is the best that I've found for working on Bones, and it's not too shabby on other materials, either. There are many other types out there; find the one that works the best for you. 5.Something to pin parts with; in this case I'm using paperclips. They're plenty strong enough for what I'll be doing. Again there are a lot of things you can use, go with what works for you. I use brass rod for bigger and/or metal miniatures; it's stronger. Not pictured: A razor saw for cutting metal figures. Mine is missing right now, but the one I use is made by X-Acto. 6. A drill and bits for making holes for pinning your figures. 7. A bits box. This is where you keep all of your spare parts for conversions. I've got around a dozen of these things, all full of weapons, shields, body parts, and all sorts of other things.If you buy a figure that has different head or weapon options, the pieces you decided not to use go into your bits box. Got a figure that you've already cut the head and both arms off of to use elsewhere? Keep it. You might want those boots for something next summer. Never throw anything away. Here we go! The first conversion will be a simple weapon swap; a spear into a halberd. Here, you can see I cut off the spear head in order to replace it with something else. This brings up a good rule: try to find a 'seam' to make your cuts at, if possible. Here, the 'seam' is where the head of the spear meets the shaft. Other good 'seams' are wrists, especially if there is a sleeve/gauntlet/wristband that will provide a guide for cutting and leave a nice flat space to attach the new part. Not quite as good of a seam here, mostly because the top of the hand/fist isn't entirely flat. It's still a very good spot to use for weapon swaps, though. (I'm sorry, I forgot to take pictures of these guys, but you can see them completed in the group pictures down below.) Now, let's do some shield swaps. This is the spear goblin. What I want you to notice here is that I was careful to cut the shield off in such a way that the straps were left intact on the goblins arm. Sure, you can just chop the shield off however you want to, but: a) you'll have to re-sculpt those straps, so why make extra work for yourself, and b) that shield might come in handy somewhere else. Never throw anything away. Here he is with his new shield: : This is he mace goblin; I couldn't get a decent shot with his shield removed. This shows the new shield in place. Note that I made certain to preserve the straps on the shield arm again. And from the front: 'Wait a minute!' I hear you cry, 'I just started this hobby 5 minutes ago, I don't have a bits box with lots of neat stuff in it for me to do conversions with' No problem, the next 2 are for you. These 2 goblins got a literal weapon swap. I cut the weapons off (again, I tried to do the cutting at a 'seam') of each figure and reattached them to the other figure. And here they are all glued back together: The sharp eyed among you will notice that the bottom of the spear is a slightly different color than the rest. I accidentally cut into the bottom portion when i was trying to clean up the points where it was attached to the figure.(See? I make mistakes, too. No matter, carry on! That's why we're practicing.) I used a little bit of modeling putty to smooth it out. These next 2 are actually the first 2 that I did, before it occurred to me to document the process for others, so I don't have in progress shots of them.They are included just to provide more examples of what can be done in a few minutes. You'll notice that these fellows have some green stuff on them. The goblin on the left has had his arm from the elbow down swapped with one from a pathfinder goblin. I made some wrappings out of GS to hide the join between the 2 parts. The goblin on the right had his shield and arm from the elbow down removed and the arm from the first goblin grafted on. The 2 parts did not align very well, so I gave him a chain mail sleeve from GS to hide the join. Detail of the added armor. And finally, here they are all together. Added weapon, swapped spear for mace,swapped shield, changed weapon tip pathfinder goblin arm, shield swap, weapon swap, swapped mace for spear Was this useful/helpful/informative for you? Is there anything I could do better? Is this something that you'd like to see me continue doing? Please note that I made this an open thread; I'm not the only person that does this, and I am by no means a master at it. If you've got some tips/tricks to add please do so. Step-by-step pictures of what you're working on would be great; I'm still learning, too! I hope that this inspires at least one person to give converting a try.