Wilwarin Posted August 22, 2008 Share Posted August 22, 2008 Alright, I've been lazy and haven't put his pictures up yet but he is finished and I like how he came out! :) Quote Link to comment Share on other sites More sharing options...
mercoutlaw Posted August 22, 2008 Share Posted August 22, 2008 I probably would have done more with that awesome shield, but it looks really nice. Quote Link to comment Share on other sites More sharing options...
Wilwarin Posted August 22, 2008 Author Share Posted August 22, 2008 Thanks! I wanted the shield to look like it was a humanoid's head that was stretched out, hence why it's rather simple :) Quote Link to comment Share on other sites More sharing options...
mercoutlaw Posted August 22, 2008 Share Posted August 22, 2008 As long as you are happy with it that is all that matters! Everyone has their style and prefrences. Very cool mini! Quote Link to comment Share on other sites More sharing options...
Darius Glenwell Posted August 22, 2008 Share Posted August 22, 2008 A humanoids head even stretched out would still need some shading and highlights. Try using some GW flesh wash and then your fleshtone for highlights adding white after every coat for a really great flesh tone. Plus a wash of either black or blue ink for the shading around the armor would be good as well then give it a sharp highlight with some mithril silver from GW. Just my opinion though. I like the mini. And if you do that's all that matters! Quote Link to comment Share on other sites More sharing options...
Helltown Posted August 22, 2008 Share Posted August 22, 2008 I have to agree that the figure could stand a wash or two to bring out some more details. A great set to look into that give quite a bit of bang for the buck is GW's new Foundation Washes set. There's black for the armor, Devlan Mud and a green wash to be mixed 1:1 to make the shield's face look more like decaying flesh, and a VERY nice red to even out the transitions on the robe and tongue. Quote Link to comment Share on other sites More sharing options...
Nial ap Morai Posted August 23, 2008 Share Posted August 23, 2008 Definately a formidible figure, but I would suggest touching up the armor and the staff they have a bit of red, and adding a wash to the armor at the bottom of the robe and on the hands to define the fingers a bit more. Its very hard to hide the "oops" from the camera, I can't count the number of times I have cussed and fussed after reviewing shots of my folks... Was the guide I sent any help to you? Kit Quote Link to comment Share on other sites More sharing options...
Wilwarin Posted August 25, 2008 Author Share Posted August 25, 2008 A humanoids head even stretched out would still need some shading and highlights. Try using some GW flesh wash and then your fleshtone for highlights adding white after every coat for a really great flesh tone. Plus a wash of either black or blue ink for the shading around the armor would be good as well then give it a sharp highlight with some mithril silver from GW. Just my opinion though. I like the mini. And if you do that's all that matters! True, I wasn't even thinking about that. I did, however, do some shadowing in the creases along the mouth and then went over it again with the flesh color. I think it's because of my flash and the fact I haven't a light box yet (will get around to making it soon enough!) that that's why you can't see it. But thanks though!!! :) Quote Link to comment Share on other sites More sharing options...
Wilwarin Posted August 25, 2008 Author Share Posted August 25, 2008 I have to agree that the figure could stand a wash or two to bring out some more details. A great set to look into that give quite a bit of bang for the buck is GW's new Foundation Washes set. There's black for the armor, Devlan Mud and a green wash to be mixed 1:1 to make the shield's face look more like decaying flesh, and a VERY nice red to even out the transitions on the robe and tongue. I'm still learning how to do washes so that's why there aren't any on there. There is, however, a flesh wash that I used on his hands, it's Formula P3. I just got an armor wash and am going to start learning more about it! :) I'll definitely look into the foundation Washes Set, I thought they just had the paint come out! That's exciting and I'll definitely take a peak! Thanks for the information :) Quote Link to comment Share on other sites More sharing options...
Wilwarin Posted August 25, 2008 Author Share Posted August 25, 2008 Definately a formidible figure, but I would suggest touching up the armor and the staff they have a bit of red, and adding a wash to the armor at the bottom of the robe and on the hands to define the fingers a bit more. Its very hard to hide the "oops" from the camera, I can't count the number of times I have cussed and fussed after reviewing shots of my folks... Was the guide I sent any help to you? Kit Your guide is AMAZING! Thank you so much! I'm actually printing it off to keep in a notebook for future references :D I agree, I need to touch up in some places as I had NO idea that they had red on them, lol. It's amazing what the camera shows you! I actually did put a wash on his hands and I think it's because of how I took the pics that that's why it's not coming out well. I plan on making my lightbox asap! :) Thank you again, though, for the lovely guide! It's so informative and the pictures are amazing!! Quote Link to comment Share on other sites More sharing options...
Star Drifter Posted August 27, 2008 Share Posted August 27, 2008 What impresses me are the small details. The little gold bulb on his chest piece. The rivets on the side of the shield. The bat shaped helmet. The big ones, I think, need a much more patient hand. Glue the mini to an old spool so you can hold it upside-down while you paint. Look at it from every angle and make sure the entire thing is covered. This is the mini that got me into the hobby. And I think that with the same care shown toward where the edges meet (glove against weapon, tongue against inside of mouth, etc...) as you showed toward tiny little rivets then you will be well on your way. Quote Link to comment Share on other sites More sharing options...
Mr.Wizard Posted August 27, 2008 Share Posted August 27, 2008 I can see you had a lot of fun paintin' this dude. Now that he's done, one super-easy thing that would help with handling him and taking photos would be to shoot him with a little Testors Dullcote (comes in a little spray can). You made good color choices, and they'll pop even more with a matte finish. Rock on! Quote Link to comment Share on other sites More sharing options...
Wilwarin Posted August 27, 2008 Author Share Posted August 27, 2008 I can see you had a lot of fun paintin' this dude. Now that he's done, one super-easy thing that would help with handling him and taking photos would be to shoot him with a little Testors Dullcote (comes in a little spray can). You made good color choices, and they'll pop even more with a matte finish. Rock on! Thanks!! I'll definitely do that! :) Quote Link to comment Share on other sites More sharing options...
Wilwarin Posted August 27, 2008 Author Share Posted August 27, 2008 What impresses me are the small details. The little gold bulb on his chest piece. The rivets on the side of the shield. The bat shaped helmet. The big ones, I think, need a much more patient hand. Glue the mini to an old spool so you can hold it upside-down while you paint. Look at it from every angle and make sure the entire thing is covered. This is the mini that got me into the hobby. And I think that with the same care shown toward where the edges meet (glove against weapon, tongue against inside of mouth, etc...) as you showed toward tiny little rivets then you will be well on your way. Thanks! I never thought of gluing a figure to a spool. I'll definitely try that out as it would be a TON easier to paint. I'll definitely work on the larger details as I continue to paint; I'm sure I can make him look a TON better when I get a better hang of all this! :) Quote Link to comment Share on other sites More sharing options...
Star Drifter Posted August 28, 2008 Share Posted August 28, 2008 Don't worry. My wife had to clue me in to gluing your mini to something as well. Anything spool shaped will work. Use Zap a Gap or some leftover green stuff / brown stuff to stick it on. Pop it off with a knife when you're done. It's pretty much standard procedure. You can find little bags of craft spools for about $3 at the humongous chain store of your choice. Pill bottles, 35mm film canisters, or other like-shaped objects also work. I have actually come to love the film canisters. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.