Jump to content

Occullus, The Eye Beast Hour by Hour WIP


Recommended Posts

  • Moderator

Well, I've seemed to carve out some time to paint this guy now. For those of you who don't know, this mini is my first ever sculpt. You can read that whole sorted story here. This mini is a resin proof the caster made for me so I can check the model and so I can paint one while awaiting further developments in the casting process.

 

Because this was a proof and because it is in resin, there is a quite a bit wrong with it that won't be wrong in any final minis. You'll see a fair amount of green stuff on it. Some of that is fixing gaps and issues I made while learning how to work with resin (never worked with resin before), some is fixing things that broke in shipping or my own clumsy handling (mostly a few teeth), some is fixing casting errors caused by bubbles or incomplete fills in the mold (the tips of a few head plates and some of the claws on the eye stalks), and some is fixing things that appear to be errors in the mold (the missing tooth on the tongue and the webbing on the right side of the mouth).

 

Anyway, here is the body after much cutting, scraping, gluing, and GS. Note that the redone top of the stalagmite was totally my fault as I broke it off while drilling the pin hole too aggressively. Like I said, this if my first experience with resin.

 

post-140-0-98439900-1337919045_thumb.jpg

 

post-140-0-79296900-1337919046.jpg

 

post-140-0-03844600-1337919048.jpg

 

post-140-0-40668800-1337919047.jpg

 

I'm going to finish prepping the eye stalks tomorrow and will hopefully start the painting over the weekend. I should warn you though, I'm sculpting a lot these days, so if I get a commission, I may have to set the painting of this aside while I work on it, so it might progress slowly from time to time.

 

Let me know what you think. I'm also open to color scheme ideas, as I am still not fully sure where I want to go with it, other than the eyes.

 

Have a good day,

 

Andy

  • Like 2
Link to comment
Share on other sites

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

  • Moderator

Today, I finished prepping the eye stalks and filled in the base. Basically, I spent the hour re-sculpting some eye stalk claws that had either broken or were malformed. After I finished each stalk, I placed it on the body in its place as you see in the first picture. Then tonight, I put them in the same order in a large cork to spread them out so I can paint them. I just washed them and when they are dry I'll prime them yet tonight.

 

post-140-0-98546700-1337992693.jpg

 

post-140-0-70701300-1337992692.jpg post-140-0-34695500-1337992693.jpg

 

 

Have a good night,

 

Andy

  • Like 1
Link to comment
Share on other sites

  • Moderator

Hours 1 and 2:

 

First, I painted the eye and lid in Walnut Brown. Then I highlighted the corners up to Intense Brown in 5 layers. Next I painted the pupil in a mix of Black and Blue Liner. I edged the iris in Walnut brown and then painted the iris with various layers/glazes of Chestnut Gold, Palomino Gold, Clear Red, and Muddy Olive. The reflection dots were painted in Linen White, glazed in Blue Liner, and then finished off with Linen White points.

 

post-140-0-69243500-1338066420.jpg

 

post-140-0-34172900-1338066421.jpg

 

 

Next I base coated the head plates in Muddy Dirt and the body scales in Muddy Brown followed by a heavy wash of Brown Liner.

 

post-140-0-95441500-1338066436.jpg

 

 

I feels so good to be painting again. I haven't touched a brush since January.

 

Have a good day,

 

Andy

  • Like 5
Link to comment
Share on other sites

  • Moderator

Hour 3:

 

One thing I didn't mention is that I am painting this mini to give it to a close friend of mine, who happens to own a few H&R Block franchises. Over the past year he's been advising me off and on on taxes and the like as I have been setting up my sculpting business. This mini is to be his payment for that advice, and for being an all around hoopy frood all these years. Anyway, I was talking to him last night and asked him if he liked red, and he said no, he prefers purple. @*#^& Now what. To switch to purple, I'd have to switch the whole mini from a warm palette to a cool one. So that is what I did:

 

post-140-0-10408700-1338343926.jpg

 

First, I glazed the red and yellow parts of the eye with several layers of Clear Blue. This turned the reds to purple and the yellows to green. I then added some more purple and green to the iris. I repainted the body in Shadowed Stone and the eye lid and membranes in Woodstain Brown, both of which are cool. I then washed both with Blue Liner (though it looks like I missed the upper lip looking at the photo).

 

Oh, and I started the mouth, painting it in Dusky Purple.

 

So I didn't get any further really, just switching the color palette.

 

Take care,

 

Andy

  • Like 4
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...