Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By 72moonglum
      Hello all you Reapernauts!
       
      So just finished these two up, keep working on Shadowrun stuff for a bit of variety.
       
      These two are either Deckers as per their original packaging, or Young Deckers when you look at the Iron Wind Metals page nowadays.  Either way, some pretty fun figures to paint, a guy and a gal. After taking photos, as per usual, I found a few glaring errors, but I'm not sure if I want to go back in to repaint some parts and rephotograph.  Out of everything, I'm just pretty happy on how the little rat came out.
       
      So anyhoos, here they are, enjoy!

      and of course I always giggle that the eighties imagination never conceived small little phones you could do virtually anything you ever needed with, but rather had their guys carrying around big, long laptop/keyboards to get their tekkie stuff done.   I wonder if newer editions of Shadowrun (assuming they exist) compensated for this in the future.
       
      Hmmmm...
       
    • By Orlando_the_Technicoloured
      https://www.kickstarter.com/projects/yetlblack/corvus-corax-miniatures-sons-of-yetl-black
      Story
      Corvus Corax Miniatures is a small hobby project created in 2013. Since then, four projects have successfully funded on Kickstarter and all have been fully delivered on time without any delays. The feedback from the backers have only been positive!
      The goal of this project is to raise funds for the production a total of four (4) miniatures for the Sons of Yetl Black. The miniatures will be cast in high quality, non-toxic resin. The scale of the miniatures is 35mm (measuring to the eyes in a standing, straight pose, although some characters may be slightly larger because they are supposed to be large characters).
      Strendu Bodaway Pachoa Niyol  (Actual copies of the resin miniatures. Note that the resin miniatures below are not 100% in scale with each other, but resized for editing purposes.)
        Grefven always makes lovely things and is a reliable KS creator
    • By BLZeebub
      So after too many years of painting with my bottles just in boxes or standing around on my shelf of shame or in various drawers, I have finally at much cost of labor made paint organizers!  BEHOLD!  I made these to hold up to 204 Reaper dropper sized bottles (Army Painter and Vallejo fit too).  They aren't the only ones I use by any means, but they're the bulk of my paint collection.
       
      Wasn't the hardest thing in the world, but honestly I might try another method if I do this again.  Right now the units are loose, probably going to lean them on the wall--eventually I would put supports on the backs so they can stand up at an angle (think picture frames).  The insane super duper bonus feature is that I can put the two together and transport, or more importantly, SHAKE all my paints at once!  The main purpose was organization though and being able to see each of my paints and, when I've organized and sorted them, see the spectrum at a glance rather than digging through a drawer as I have been doing.  For the chromophiles out there I'll post pics when they're sorted and in their proper places.
       
      To make them, I sized the bottles and figured out the hole size and spacing (bottles are about 1" diameter, I used a 1 1/8" hole saw (paddle bit blew out the back side) and drilled 102 holes (sandwiched the 3/4" boards together).  It took hours as my drills' batteries kept dying and the saw lost its good edge by the 60th holes or so.  I used the "holes" I drilled out as supports (had to chisel the middle supports in half) between the silver parts and the 5mm (yes, civilized world, in the US we know how to use proper/metric, and certain sizes of wood are specified in metric!) plywood base (black, not really visible).  I carefully glued and screwed these together.  Decided to use up some spray paint I had lying around.  Enjoy and be inspired!

    • By 72moonglum
      And another Shadowrun figure, the third figure from what was originally a three piece set of Elven subtypes.
       
      This dapper gentleman is a Wakyambi, which from what I read on line (haven't ever actually ever played Shadowrun or own any of the gaming books), he's an African Elf Subtype, tall and thin.  He was fun to paint, but his dingly dangly stuff eventually just made me cry for mercy in the hopes I would someday finish. His necklace and his little staff had quite a bit of details to it, as well has his funky monkey belt buckle.
       

       
      and here is the set in its entirety, not completely great focus, but it's hard to get three figures to focus nicely:
       

       
      So three more finished, I wonder how many more I can get done before I go to the great beyond?  Hopefully 50 or more per year for another thirty to forty years, but we'll see....
    • By 72moonglum
      Hello to all you bovine aficionados!
       
      So a while back ago I did a normal minotaur, Greek-type mythological beast with an axe on two legs.   This one is a little different, it's a Shadowrun Minotaur which has a bull's body and a "primate" face.  I think Jim Johnson sculpted it back in the nineties, as usual forgot to check for a date on the bottom.  Pretty straight forwards colors, and it's actually kind of a big and heavy model. Put him on an oval base because there was no way he was going to fit on a normal size circle one:
       

       
      Anyhoos, hope you guys all enjoy him!
       
  • Who's Online   6 Members, 1 Anonymous, 33 Guests (See full list)

×
×
  • Create New...