Jump to content

Sign in to follow this  
Adrift

WorldWorks/Terraclips/TerrainLinX

Recommended Posts

I've got bunches and have shown off what I've made in my WIP thread. There was no KS for these, probably never will be, as Wyrd is pretty stable financially and did it old school.

 

You do need lots of them, at least 3, to make anything decent and I'd probably suggest 2 of the clip packs as well. I personally have 4 buildings, 3 streets and one sewer and between 2 street packs and 3 building packs I can cover a table.

 

Also, if you buy them, get them from amazon where you're paying $35 a pack instead of $50.

  • Like 1

Share this post


Link to post
Share on other sites

Probably be cheaper to order off of US Amazon and pay shipping. My fiancé orders from Amazon.UK for BBC stuff (like Doctor Who videos) and it's way cheaper then buying from US Amazon even after shipping.

 

And just so people dont have to go searching though my WIP thread, including me, here's one of the Terraclip things I did.

 

430120_471271892906422_1400023991_n.jpg

  • Like 2

Share this post


Link to post
Share on other sites

WOW.

 

Okay I may be investing in some of these afterall.

 

Did anybody check out the video on their site? That hand thing is awfully familiar...

Share this post


Link to post
Share on other sites

And just so people dont have to go searching though my WIP thread, including me, here's one of the Terraclip things I did.

 

430120_471271892906422_1400023991_n.jpg

 

... too late. >_<

Share this post


Link to post
Share on other sites

I wondered if your other pictures were the terraclips. That stuff could get really pricey, really quick. I really appreciate the advise on what/how many to buy.

Share this post


Link to post
Share on other sites

Ya, they get pricey. My work only gives bonuses/awards as gift certificates so that dictates all my non-miniature spending. This summer was fairly good spending wise.

  • Like 2

Share this post


Link to post
Share on other sites

Ya, they get pricey. My work only gives bonuses/awards as gift certificates so that dictates all my non-miniature spending. This summer was fairly good spending wise.

 

I get those too sometimes. I keep forgetting to get Amazon instead of Barns and Noble though.

Share this post


Link to post
Share on other sites

I have close to a dozen sets myself. They are really nice sets, but as stated earlier you really need more than one set of each. I haven't cleared out a work space to build anything approaching the rather impressive setup already showcased. I'm lucky enough to have a store that stocks them locally so I was able to pick them up over several months.

  • Like 1

Share this post


Link to post
Share on other sites

That's 2 streets and 3 buildings. The park was scratch built from extra street tiles I have from a 3rd box.

 

Connector wise I think it's 4-5 boxes. This setup is two folding tables that I set up in my guest room\gaming room and the tables, while the same, are a bit unlevel so I needed extra connecors to make sure it was pretty strong. If I was on a table that size that was one piece I would have been able to use one less box I think.

 

All the buildings had removable roofs and stories. Here's a shot of the inn

 

229341_471276269572651_2074555378_n.jpg

 

And here's a shot of something smaller I made, about 2 and a half street sets, that's some bridges over a river.

 

47951_475778199122458_203434174_n.jpg

Share this post


Link to post
Share on other sites

One more shot of me using 2 street sets, this was before I had bought more, as a modular dungeon crawl. I've had larger ones made before where there are doors that once you open I place the room but this particular one was very windy and it would have taken 5-6 sets to make. The downside to these really is it's hard to make a traditional D&D dungeon with them so after this I started building to the strengths of the Terraclips and remaking the maps which is what you saw with the previous photos I've shown.

 

 

554955_434862373214041_1321110522_n.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Talae
      Clorehaven & the Goblin Grotto, via @Kickstarter https://www.kickstarter.com/projects/printablescenery/clorehaven-and-the-goblin-grotto
       
       
      The picturesque town of Clorehaven  
      A lively tavern, a variety of interesting and useful stores and fine lodgings is all the weary adventurer could ask  for.
      The locals seem polite and friendly. The beautiful stone and wood buildings tell you this small town is prosperous and will someday grow into a much larger city. But under the surface of the town, Clorehaven keeps a dark and foreboding secret.  
      Beneath the neat hedgerows and well-kept homes there lies a sprawling complex of caverns. 
      The deep goblins are a sniveling race of green-skins, plying their trade in the strange flora and fauna they gather from around mysterious pools. 
      Design and build your own medieval buildings using the Clorehaven OpenLOCK system. From simple houses to huge complex structures, anything is possible. 
      Explore the Goblin Grotto using the modular Grotto cavern system. Walls and floors can be combined to create a huge variety of underground caverns or above ground structures. 
      Who knows what’s in store for those above and what lies in the depths below. Clorehaven and the Goblin Grotto - By Printable Scenery - the best 3D printable scenery in all the worlds. 
      All the models from Clorehaven & the Goblin Grotto are delivered as optimized STL files to print on home 3D printers.
      If you take the All-In Pledge, you also receive the free bonus items.   
      Clorehaven Pledge :   Clorehaven is constructed using the OpenLOCK tile system where quality detailed modular and functional buildings can be constructed in any shape and size whilst maintaining the true 1" grid system used for most role playing games. 
      This pledge contains the models to build the Townhouse, Cottage, Homestead, Grand Hostel, Cabin, Tavern, Chalet, Watchtower and Schist Stone Fences.  The Clorehaven Pledge includes the stretch goals labelled Clorehaven.
       As the Kickstarter progresses the free stretch goals will grow and expand Clorehaven from a town into a city.
      Goblin Grotto Pledge:  The free form caverns create natural and expansive cavern maps and tunnel systems quickly and dynamically. The cavern floors are designed to have a comparable 1" grid system for RPG whilst still maintaining the natural rock form.
       PLAY This pledge contains the Moon Effigy, the Goblin Cavern Floors, The Cavern Walls, The Cavern Tunnels, the Cavern Bridge, Rickety Bridges and the Gloom Creeper. The Goblin Grotto Pledgeincludes the stretch goals labelled Goblin Grotto.
       All of our 3D-printable models begin their life as hand drawn concepts. From there we digitally sculpt the models to create high detail STL files. The models are test printed and painted before released so that you know each model from Printable Scenery will print perfectly. 
       Printable Scenery created the OpenLOCK system in 2016. Since then it has become the standard. Its innovative seamless locking system revolutionized dungeon system. Printable Scenery open-sourced the design and it allows for free commercial use to third party designers such as Open Forge.
      The Free Stretch Goals are a big part of our Kickstarters. The more stretch goals we hit, the more models you will get. So join us in this grand adventure and discover the stretch goals beyond.  
       



         The bonus items listed below are free with the All-In Pledge.   
        If you want  an add-on you need to add the amount to your pledge or you can add it in the pledge manager at the end of the campaign.
      Note: If you want to get Add-Ons but not any of the main pledges then you can make a pledge for the amount for the Add-Ons only. To do this: 
      1. Select 'Back this Project'  2. Select '$1 or more -  Add-Ons Only' 3. Enter the amount for the Add-Ons.  Once the campaign closes you will be sent a link to the pledge manager to select the add-ons that you picked.
        Ruined Winterdale II Add-On NZ$30
      Back by popular demand, the Ruined Winterdale II Add-On contains 5 never before ruined buildings. To claim this add-on package you need to add the amount NZ$30 to your pledge or you can add it in the pledge manager at the end of the campaign.
      Dungeon Booster Add-On NZ$50 
      The Dungeon Booster Add-on contains walls and floors that are designed to boost your Rampage dungeon encounters.  To claim this add-on package you need to add the amount NZ$50 to your pledge or you can add it in the pledge manager at the end of the campaign.  
        Previous Kickstarter add-ons are bundled items that have been requested by backers from previous campaigns. 
      Click on the links below to see the list of models that are part of each Add-On.  (eg. the Lost Tribes contains 13 models)
    • By ultrasquid
      I didn't see this listed so:
       
      https://www.kickstarter.com/projects/archonstudio/dungeonsandlasers-plastic-tabletop-rpg-scenery
       
      I received an engineering sample of the product today. They're made of hard gray injection-molded plastic, my guess would be ABS from its hardness and density. The floor and wall ties fit together tightly, though it takes a bit of effort that likely would wear at paint on those surfaces had they been painted. Due to response from earlier sample recipients, the production tiles will be slightly larger than the samples.
       
    • By SamuraiJack
      https://www.kickstarter.com/projects/aus30k/3d-printable-space-elf-buildings?ref=discovery_category_newest
       
      About
      Welcome to our fourth project and one which is a little different to the previous two. While our projects for the resin models will be continuing latter this year and early next, we decided to run a small kickstarter alongside some other projects which we are doing.
      One of the things which our local gaming community has always been big on is the creation of great looking gaming tables and key to that is to have great looking terrain. While there is an abundance of Imperial terrain now available both through various stores and a tremendous amount online, there is often a significant lack of xenos/alien themed terrain to suit the non Imperial factions.
      Sadly terrain is also one of the more expensive things to ship internationally and so has always been a hurdle for many players and groups. With the growing popularity of 3D printers and prevalence of print hubs scattered around the world these hurdles are starting to break down.
      With this project we hope to provide people with some nicely detailed buildings with a strong Space Elf feel. The buildings are quite large and should provide both lines of sight blocking terrain and areas for more mobile units to land on higher ground. The pledge rewards are for the STL files themselves to allow you to go and print your own, there are no physical rewards, however if you need help finding a print hub to get your files printed, we will certainly try and help you with that as well.
      There are three buildings in total, backers pledge for one (AU$15), two (AU$30) or all three (AU$40) buildings. The rewards are for personal printing, not commercial or distribution.
      Exiled Space Elf Compound
      Shrine of the Brilliant Lance
      Shrine of the Soaring Eagle
       
    • By SamuraiJack
      https://www.kickstarter.com/projects/mysticrealm/mystic-realms-qcs-quick-cave-system-3d-tabletop-terrain?ref=discovery_category_newest
       
      About
      Mystic-Realm's Quick Cave & Cavern System
      In this campaign we deliver to you a stand alone wall-less terrain system that will work with the terrain you already have.
      QCS terrain is designed to get the tabletop adventure assembled quickly! Each chamber ranges in size all the way up to nearly 8 inches x 8 inches.  Lay down one chamber sections [encounter] at a time as your players progressing though the adventure [fog of war style] or pre build the entire adventure with a quickness. 
      The wall-less design and large pieces make for easy painting, easy transport and playable in any direction.   Playable in any direction? YES! Aside from being able to play off any edge each chamber is double sided! 
      This Kickstarter will include the Base System set 1, Stalagmites set 1, Pools set 1 and the 6 pieces Junctions set 1.  For stretch goals the QCS will expand to include - Twist & Turns set 1 and Bridges set 1.  Each set includes 4 double side themed chamber pieces.  Printing two of each double sided chamber will give you 8 unique playable chambers for each set.  So each set is pretty big and provided more than enough encounters for an evening adventure.
        QCS Base System
      QCS Stalagmites 
        QCS Pools 
      Junctions Accessories
      Stretch Goal LOCKED QCS: Twist & Turns 
      [UNLOCKED]
         
    • By SamuraiJack
      https://www.kickstarter.com/projects/lorazam/apocalypse-fortress-3d-printable-fortification-and-terrain?ref=discovery_category_newest
       
      About
      From the calm arid deserts, we move on to a new more dramatic scenery. Worlds engaged in prolonged sieges and defensive endeavors have developed unique fortifications and barriers to block the enemies advance or break them entirely. 
      Bunkers, Forts, Walls and classic defensive material are the theme of this grim campaign. Looking at the diverse range of uniquely designed defensive structures you might find yourself familiar with a few of the designs. 
      Spreading the word and sharing the Campaign's Web-Link will result in more content for each of you, but more about that in the Stretchgoal section down below.
      We also greatly improved our file delivery system (more about that at the bottom).
      The Full Pledge Level already gives you access to all models of this Kickstarter including all reached Stretchgoals. Additionally, to the 6 Buildings, the Fortress Walls and the modular Trench System below, much more content will be unlocked through the Stretchgoals.
       -> Pictures of actual Print-Outs near the bottom of the page!
      Command Center Infantry Command The Fortress with Modular Wall System The Fortress with Modular Wall System The Fortress with Modular Wall System (pitched roofs are optional) Gun Emplacements Modular Fortified Trench System Modular Fortified Trench System Pillbox Infantry Bunker 2 Watchtower
  • Who's Online   12 Members, 0 Anonymous, 208 Guests (See full list)

×