Recently Browsing 0 members
No registered users viewing this page.
Tiny Furniture's "Inserts 25mm - Village garbage" is a five-piece set of 1" circular garbage base inserts for your miniatures. They may also be used as terrain, objective markers, etc, with or without bases. Like Tiny Furniture's other miniatures, they have the high level of detail you expect, and can be painted easily by beginner players. Like Tiny Furniture's "Dungeon Garbage", the miniature bases have an assortment of garbage suitable for dungeons, city states, and villages. Each heap pile is a collection of smaller distinct items, so, like "Dungeon Garbage" you have the option of giving as much attention (and time) to the details as you would like. The bases are available unpainted. While I didn't see a painted version in the catalog, you can contact Tiny Furniture and see if a painted version is available.
The five bases have different garbage:
* Rat with barrel, plate, and bone.
* Chest with broken plate.
* Broken wheel, urn, and skull.
* Broken barrel bottom, wood, and urn.
* Broken pottery and wood.
Color Scheme : Realistic and in the Background. Unlike Tiny Furniture's "Garbage Debris" miniature set, you may not want the garbage bases to be so demanding that they take the focus of the viewer's attention from the miniature on the base. This may result in the overall miniature and base looking too busy, as each element of the miniature and base is demanding the viewer's attention. At most, maybe the rat might be painted to be more noticeable by the viewer. Real garbage is a homogenous mess, typically brown, so I went with painting the miniature with that in mind, still painting the features differently if the viewer picks up the miniature to look at it closely. One of the photos has the "Garbage Debris" set next to the inserts.
Painting Tips. I primed in a brown colored primer, followed by a dark brown wash, such as Army Painter's Strong Tone wash. I then painted the wooden pieces the same brown color, more or less. Skulls and bones were painted ochre. Optionally, you can then drybrush or paint ochre as an undercoat for lighter or different colors. Besides paints, you can use washes for a faded coloring. Both the Army Painter and Secret Weapon Miniatures has a range of colored washes you can use. To unify the base, I then used a brown wash, Secret Weapon Miniature's Sewer Water. You can then edge-highlight wood, etc. with a lighter brown and ochre. For the rat, I painted it grey, with flesh tone paws and ears, then black for its eyes. To make the rat stand out a little, I did not wash it.
Conclusion. Most painters considering Tiny Furniture's "Inserts 25mm - Village garbage" are probably intermediate painters, but the set should be accessible to beginners with some terrain experience as well. The inserts can be used as garbage piles for a variety of other uses, such as objective markers, rough terrain, garbage piles, and so on.
Designs include cobblestone, cobblestone, green 40K, and yeah I'll pick up more cobblestone.
Made in the USA. Economic disruption in China has shut down non-essential production, including plastic injection figures.
Q&A on Dakka : https://www.dakkadakka.com/dakkaforum/posts/list/0/785873.page
By Jordan Peacock
I put in for a bag on the Black Friday sale, because ever since I was a kid, I had a certain fascination with the surprise element of grab bags ... and there's something especially fun about the assortment of random bits from SWM: "How can I make use of this oddball base / terrain bit?"
Basically, the story behind the "Bag o' (Crud)" (that's not what it's actually called, but Wendy would be disappointed in me if I used that word in casual conversation) is that it's a bag of whatever assorted bits are on hand that aren't quite up to Secret Weapon Miniatures's usual production standards -- so there might be some bases with warping, or bubbles in the base near the edge, or breakage, etc. I also notice a lot of variation in resin color, so maybe some are the result of testing out different resin types for casting. Sometimes the bases show no discernible flaws at all, but that might simply be because he throws in a few random spare bits to fill out the bag if there's not enough "trash" around.
In particular, I got some more "Shattered Ritual" bases of assorted sizes and styles. (I got a big oval "Shattered Ritual" base, and actually bought one 120mm round-lipped "Shattered Ritual" base last Black Friday circa 2018. I thought I could use the latter to base an Iron Kingdoms mini project, but never got around to it, as the campaign had already ended, and noises about possibly starting it up again got well snuffed out.) I *love* this style, even though it's rarely a fit with the sorts of games I typically run. Basically, each base has an intricate collection of "magic circle" designs with a ruinous look, like some wizard's tower had circles-upon-circles interlinking with each other, and then SOMETHING WENT HORRIBLY WRONG. (And thus the "shattered" part.)
The surface of the flooring is fairly smooth, but with lots of finely scribed detail that would be a pain to try to paint out by conventional means. However, I found a method that works for me: 1) Spray-paint it with white primer, right out of the bag. It seems as if there's just a tiny bit of residual mold release that collects in the "scribed" areas (or perhaps there's some other "surface tension" effect taking place), and the end result is that the paint tends to collect on the flat, top surfaces, but DOES NOT pool into the sharp scribed lines, so this actually *brings out* the detail more. 2) Once it has fully dried, I smear the surface, section by section, with Apple Barrel paints "Pewter" acrylic, then wipe it off, allowing the paint to "stain" the surface and especially the recessed areas. "Pewter" is a strange "dirty grey" color that has an ever-so-faintly yellow-green shift to it. It ends up turning the white-primered surface into what looks (to my eyes) something like aged porcelain, with a faintly grimy yellowish tint to the surface, and a dirty-grey "stain" that brings out the scribed lines. Sometimes in the course of wiping off the excess, I will catch some of the paint in the recesses, so I go back later (after it has dried) to do some touch-up work where needed. 3) I apply some brown wash to the exposed "ground" areas where cracks between the "magic circles" have given way. If some of this brown splashes onto the surface, I just wipe it away, and any resulting "stain" just adds to the grimy effect of the ruins. 4) Using a fine liner brush, I trace the thicker border lines around the circles with Golden Yellow (not a particularly BRIGHT yellow), and then go back with a very little bit (at a time) of watered-down Pumpkin Orange to tint random parts of the golden-yellow for a little color variety. (Burnt Sienna would probably work well, too.) 5) Also using a fine liner brush, I go in and do some spot tinting of some of the circles, symbols, and other shapes (but not all!) with various pastel or otherwise reduced-saturation paint colors (Barnyard Red, French Blue, Denim Blue, Pewter, Olive, etc.), slightly watering down if necessary, as I want a *hint* of color, not solid, garish spots. It's perfectly fine if the colors are "dirtied" a bit, or the coverage isn't complete, since a bit of *wear* would be appropriate.
Here's "Fiametta" (Soda Pop Miniatures - "Relic Knights" - heroine from "Doctrine" faction) painted up and based on the rounded-lip "Shattered Ritual" base I got from the latest Bag o' Crud ... on top of the oval base I got in last year's Bag o' Crud ... on top of a Tablescapes "Forgotten City" tile set. "Doctrine" is basically this faction centered around a "magical academy" in Relic Knights, so the "mook" forces are a bunch of magic-school kids (boring looking guys in school uniforms, and girls in really short skirts, all waving wands), with most of the heroes either being "teachers" or other "staff" at the school, plus a few special "graduates" ("mahou shoujo" types, mostly). The faction color is yellow/gold, so I used it for the base rim, and also used it as a recurring element for the magic circles on the Shattered-Ritual bases.
After a successful 1st kickstarter project earlier in the year I am back with a second.
This time I am looking to extend my existing range of 28mm scenic bases with 3 further lines. I already make bases as part of my business and have paved bases, lava bases etc. along with various bits of terrain in my range already.
Moonkraft is a fairly new start up and I am looking to add many many more goodies to what I already sell. I have a brain overflowing with ideas, the only trouble is deciding which to do 1st.
If you are like me and are a miniature painter and gamer, then you already know that a good base will give you miniature the finish you want and can really make or break a good bit of painting. Also this bit of modelling can be a little tedious and time consuming and if you are painting a new army those minutes soon add up and turn into hours.
I have created 3 new sets of bases, Rocky outcrops, Skulls and Rocks and my personal favourite Atlantian Temple Ruins. I need to raise just £500 for the moulding costs to produce all 3 of these sets of bases. which I will add to my growing range of terrain and bases.
The bases were sculpted by myself and I have made them in 3 sizes, 25mm, 30mm & 40mm so they should fit all the sizes you require.
The pictures don't do them justice.
25mm Temple bases 30mm Temple Bases 40mm Temple Bases 25mm Skull & Rock Bases 30mm Skull & Rock Bases 40mm Skull & Rock Bases 25mm Rocky Outcrop Bases 30mm Rocky Outcrop Bases 40mm Rocky Outcrop Bases I do things the old fashioned way, no 3D printing or computer software, I build and sculpt, then I make moulds, then I cast. If necessary there may be a 2nd mould made to improve casting after any adjustments have been made, but this is a rarity as I am an old hand at the process.
The funds will be used for the silicone to make the molds (the expensive bit) and also go towards the resin.
Postage. We will be shipping the set out as soon as the funds come in and the prices are set to the following 3 zones: UK, Europe & Rest of World. Prices are based on Royal Mail to calculate the cost.
This is another clix project. I picked up a bunch of plastic figures for cheap, cut them off the original clicky base, and made new ones. The bases are by Reaper, turned over and filled with putty and then stamped. Simple base coat and wash and those were done. A few of the figures got paint touch ups to clean them up and bring them all together in a blue and black color scheme. They've been sprayed and are ready for the table.
Who's Online 8 Members, 1 Anonymous, 39 Guests (See full list)