Jump to content

Corporea

Corporea's Desk of Progress

Recommended Posts

You may be all over this already, but don't forget that the mirror would cast light "up", making its surface a light source for both "pictures"; but I'm not sure how pronounced it would be for your work here.

 

wey-bridge-light_reflection-rtalibart550

 

It seems like that would be very tricky to pull off with the color/monochrome switch. I wonder how it would work?

  • Like 1

Share this post


Link to post
Share on other sites

I'm not sure either.  I may have to play with light on the mirror to see what it does to my reflections.  :wacko:

Share this post


Link to post
Share on other sites

Probably subsumed under "secondary light source". The painting does it quite simply. The bauble shows a little, but fairly sharp, light from the reflection, just above the waterline, and some bright white hot-spots on the right hand side. I was happy to find that, since it was the effect that was preying on my mind as I looked at your progress so far, simply represented. It would be like a subtle OSL.

 

I think it was in my head from movies where the effect is often exaggerated, and the character's faces lit from below by the reflections off the water, so I was worried it was not-real.

 

Perhaps the greyscale side could have a simple, warm/yellow OSL "shining" from the coloured side, and the coloured side a washed out pale grey-white light "shining" from the monochrome side?

 

I offer this idea in all humility, as you are an infinitely better painter than I am. I am just trying to imagine what might defeat/enhance the illusion. Also it is possible that if only one side got the OSL, that side would register as more "real", since the shapes would have true lighting, making them 3D, whereas the other side would seem flatter.

  • Like 2

Share this post


Link to post
Share on other sites

ah!  I see!!  Hmmn.  I was going to try to keep everything monochrome up top, but I could do a test spot and see how it looks with a hint of color-cool idea!  It might work better if I just do it with white highlights on the feet- I still haven't painted them yet, so there's no contrast there at all.  hmmmn.... must consider....  I get what you're saying and it makes perfect sense!  thanks!!!

  • Like 1

Share this post


Link to post
Share on other sites

Probably subsumed under "secondary light source". The painting does it quite simply. The bauble shows a little, but fairly sharp, light from the reflection, just above the waterline, and some bright white hot-spots on the right hand side. I was happy to find that, since it was the effect that was preying on my mind as I looked at your progress so far, simply represented. It would be like a subtle OSL.

 

I think it was in my head from movies where the effect is often exaggerated, and the character's faces lit from below by the reflections off the water, so I was worried it was not-real.

 

Perhaps the greyscale side could have a simple, warm/yellow OSL "shining" from the coloured side, and the coloured side a washed out pale grey-white light "shining" from the monochrome side?

 

I offer this idea in all humility, as you are an infinitely better painter than I am. I am just trying to imagine what might defeat/enhance the illusion. Also it is possible that if only one side got the OSL, that side would register as more "real", since the shapes would have true lighting, making them 3D, whereas the other side would seem flatter.

 

That's an interesting notion. I understand Corporea's concern about breaking the strict monochrome / color divide. I'd hate for her to break the core concept of the piece.

 

On the other hand, a subtle warm highlight on the figure, mirrored by a subtle cool highlight on the reflection could tie them together into a single whole. (Since it is a painting, and not a real mirror)

 

A challenge for the cool lighting would be that cool colors against warm tend to look more like shadow than highlight, and I really don't know how to solve that! This whole project is way beyond my own artistic acumen. It's cool to see somebody else pull it off. ::):

Edited by klarg1
  • Like 2

Share this post


Link to post
Share on other sites

:wow:

 

I...I have no words. It's like you're channeling the pure essence of awesome. Which, granted, you do all the time, but for this project, it's like you've channeled ALL of it. Your mirror idea is mind-blowing, and it's already looking incredible!!!  :wub:

 

Huzzah!

--OneBoot :D

  • Like 4

Share this post


Link to post
Share on other sites

Everyone be jealous of me for a moment, okay?

 

It turns out that Corporea and I have mutual friends who live in my town. She came to visit them and we all had a paint party this afternoon. I was able to see this piece live and in person and it is stunning. Absolutely stunning. Cannot wait to see it when it is finished.

  • Like 11

Share this post


Link to post
Share on other sites

All I can say is "I AM GOBSMACKED BY THIS"

How Flippin incredible to see this coming together.

Corporea, this is music, its a symphony, its just plain incredible.

You have created MAGIC.. Brava !!!!!!!!!!!!!!!!!

Edited by Jasonator
  • Like 4

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Xiwo Xerase
      BattleTech is one of my long time loves for games and it's what got me into the miniature hobby.  I have actually been avoiding painting my BattleTech minis for a while so I'm hoping this will give me some amount of momentum.
       
      The four miniatures featured in this WIP thread are, from left to right:
      Catalyst Game Labs Cyclops, plastic, from the Fire Lance Pack. Iron Wind Metals 20-200, Griffin GRF-6S, metal (standing in for a Griffin GRF-3M). Iron Wind Metals 20-211, Archer ARC-8M, metal (standing in for an Archer ARC-2R). Catalyst Game Labs Catapult, plastic, from the Fire Lance Pack.  

       
      These make up the Fire Lance of the Marik Militia company I have painting off-and-on (mostly off).  The colors of the Marik Militia are purple, with blue highlights on one side and red highlights on another.  Here's an example I've already painted:
       


      The metal minis have been based using Iron Wind Metals hex bases.  The plastic minis have been removed from their integral plastic bases and based on Proxie Models plastic hex bases.  All of the minis have been glued via glue gun onto little holders I made from spare parts (PVC pipe, a wooden dowel, and washers).  These are mounted via magnets on my normal painting holders (plastic tubes with a squared base).  The point of the holders is for easy removal from the holders for photography.  (This was actually my first time using a glue gun so if some of the minis look crooked compared to the base, that's why.)
       
      The minis have been primed white using Reaper Brush-On Primer and then painted with a mix of Brown Liner, Brush-On Sealer, and water to show details.  (All of them but the Archer were painted using a 1:2 mix of Brown Liner and Brush-On Sealer.  The Archer was painted using a 1:1:1 mix of Brown Liner, Brush-On Sealer, and water.)  The bases have been covered (or filled) with paver sand glued down with superglue.  (I'm pretty sure I picked this up from @Weird-O.)
       
      Here's an obligatory picture with Sir Forscale:

       
      I've included pictures of the minis in spoilers:
       
      Archer
       
      Catapult
       
      Cyclops
       
      Griffin
       
      I'm going to point some of the obvious mistakes to get those out of the way:
      There are some mold lines that didn't get filed down. There is some detail that should probably have been enhanced (for example, filing down more on the Griffin's missile pod and recreating that detail, or drilling some of the missile launcher holes deeper). Some detail in the Archer's missile launchers has been obscured by CA glue and will need to be recreated with paint.  (Gluing on the missile launcher doors was painful.) When the Catapult was removed from its integral base, it's outside toes were mangled. Neither of the metal minis are pinned.  This is a pretty big mistake and will be painful if either of then fall.  
      Some of these mistakes won't be addressed.  I'm going to live with that.
       
      So let's talk painting.  The guiding principle, beyond the Marik Militia parade scheme is "rule of cool".   It doesn't make sense for weapon barrels and joints to be metallic but it looks cool.  The planned colors are:
      Primary purple: Amethyst Purple Blue accents: Cyan Blue Red accents: Phoenix Red Weapon barrels: Honed Steel, enhanced with the Bones metallics Joints: Tarnished Steel, enhanced with the Bones metallics Hands and other rubbers: Stone Grey Base sand: Yellowed Ivory Base rim: Gem Purple  
      I'm still trying to decide the cockpit glass color.  On the other Marik Militia minis I've painted (like the Black Knight above), I've just used Adamantium Black.
       
      (An aside about base rims: When I paint BattleTech minis associated with a particular fashion, I paint the rim of the base a color based on the faction.  Since the Marik Militia are part of the Free Worlds League Military (except for when the League doesn't exist), the base color is purple.  I have a spreadsheet of faction colors I made some time ago, before the Bones paints came out.  It uses some HD paints that aren't going to be rereleased, so I'll need to revisit that.)
       
       
      The challenge here is to paint all four minis to tabletop, in a timely manner, and without drybrushing (except the base sand, which will be drybrushed).  Let's see if I can finish this by, say, the end of July.
    • By Arimaythea
      My husband and I are about to join a campaign to play through the Curse of Strahd adventure for 5e.  My husband is playing as a half-orc sorcerer and I am a human fighter.  We decided to go with 03879: Gon'Tarr Orc Shaman and 14604: Joeliyn Sister of the Blade as our respective PC minis.  They will be the third and fourth minis I have ever painted, the other two being from one of the Learn to Paint kits.
       
      My mini hasn't arrived yet but my husband's has so I've made a little progress on him.  I cleaned him up, glued to a square base, used some green stuff to smooth out his integrated base, primed him, and put some of the base coat colors down.  I've used all Reaper paints so far - their white primer along with Leather Brown for the leather bits, Harvest Brown for the wood, and a hobbled together mix of Camouflage Green, Military Green, and Warrior Flesh for the skin. 
       

       

       
      I plan on doing a base coat of all the colors first to make sure we are both happy with the choices before moving onto washes and highlighting.  My shipment with my mini along with some bone colored paints that I need for Gon'Tarr's skull accessories should be here tomorrow!
    • By Rahz
      Let's see if I can finish one of these for a change...  Of course I neglected to take good pictures of the early steps... 
       
      Mossbeard assembled, "primed" with Sepia Liner, which after a year was kinda gloopy...  Thinned with a little airbrush thinner, it went on fine though and gave really good coverage and gave the figure a nice brown on top of the grey bones.  The green then got an overbrush with Jungle Mist and then a wash of Vallejo green wash.  The brown got a wash of Vallejo dark Grey Wash and some spots with Vallejo Rush Wash.  I've since started with a over/dry-brush of Wolf Grey over the wood.  Torso, head and one arm done.  He's a big one! 
       

       
      Thanks for looking. 
    • By SilenzZzz
      Good day, i have been painting for a little while, but recently i have tried to push myself further... this is my second mini to do for LGS painting contest (i won the first one they did) .... have about a week left to finish him. so i am planning a little more highlights and more work on the weapons....
       
      if it wasn't for a local friend i would still be painting in blocked colors and calling it done, but he keeps pushing me to try more hah! 
       
      i am open for input and criticism on him... :)






    • By Silvervane
      Ok, Here I go starting another WIP.  I had the hankering for Frostgrave only no one around who wanted to try.  So I decide to finally give the Dark Alchemy solo scenarios a try.  I had skeletons, rats, and a stand-in for the alchemical monstrosity.  I looked around and thought, hey those WWWOZ Tin man painted up red and gold would look cool as the FIre-Flingers for the final scenarios.  I also decided I only wanted to paint them as gaming pieces.  I haven't really posted anything cause my camera broke, and I really haven't wanted to pick up another.  So I'm starting this WIP to practice with my phone camera, as well as post here a little more often.
       
      Here was the first of four I need for the scenario, as it stands at the moment.  Photo work still in progress as well:

       
      Unfortunately, I had a TPK in scenario 2.  The scenario called for Wizard or Apprentice and 4 of soldiers for the mission.  They all went down, and I rolled unbelievable less than 5 for all of them on the survival roll.  I'm less than inspired to complete these guys now.  but I'll carry on and hope that the apprentice can survive the final encounter with whats left of the warband when I finish.
  • Who's Online   40 Members, 3 Anonymous, 51 Guests (See full list)

×