Jump to content
  • Optionally enter a message with your report.

    ×   Pasted as rich text.   Restore formatting

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Cygnwulf
      WIP Thread here
      I finally finished this dragon. I took a lot longer for the base because I got a little carried away, but I'm really super happy with how it came out.  To begin, this was a request from my mother in law to take inspiration from a set of china she has.   
      Here's the plate
       
       
      In the end though I'm really happy with how the dragon come out and took lots of pictures:

       
      I'm going to do my best next time to rein in the base a bit, but I'm super happy with how this came out.
    • By GodOfCheese
      Awesome random encounter, paraphrased:
       
      DM describes a green, toad-like beastie.  It--
      Me: "Is that a GREEN SLAAD?"
      DM: "Well, roll a Knowledge: the Planes..."
      Me: "No, no, I mean does it look like THIS?" [reveals recently-painted Green Slaad]
      The Rogue: "Isn't this like a miniature painter's dream?  Having just the right mini for a completely random encounter?"
      Me: HUGE HAPPY SMILE.
       



    • By GodOfCheese
      I'm painting a mini with a light source, and decided to rebase the beastie with some water effects, probably epoxy resin.  I'll probably try to make the water at least slightly rough, creating interest for the eye.  I woke up in a cold sweat this morning realizing that the light source should be reflected (or possibly just highlighted) in/on the water. 
       
      My initial thought was to:
      lightly (heh) color the bottom of the pool as if it were dry and lit by the light source pour and texture the water highlight the water by drybrushing from the light source out.  
      My concern about this is that if the viewer looks toward the light, the surfaces of any wavelets will be highlighted on the opposite side from the POV.  In other words, the viewer will see the undersides or backsides of any highlights through the translucent wavelets, and this might not look the way the viewer expects.
       
      Has anyone done this?  I looked around for a few examples but although there are plenty of doing wave effects (froth and foam), I haven't found any yet that look like translucent glare.  
    • By planetmut
      There's a patch of wasteground on Beechwood Avenue where the old primary school used to stand until destroyed by a bomb on the afternoon of April 11, 1941.
       
      Locals have long said that spot is haunted. Pedestrians say there's a cold patch as you walk past it. Kids dare each other to touch the walls, although few actually will. Dogs shy away from the area.
       
      Some people even claim to have seen a small girl wearing a gasmask.
       
      This is all obviously rubbish.
       
      But Rose is still waiting for her mummy.
       

       

       

       

    • By planetmut
      This is my second Attic Whisperer. I decided on pink for her (I still think of this mini as female) to complement the blue one. I wanted to put something on her base this time and @3vil3lvis and @Fencig both gave me some good ideas in their comments on my first effort (although making a bassinet at this scale, as Fencig suggested, is a fantastic idea but a bit out of my skill range). So I thought about just painting a circled pentagram on the plastic card floorboards and putting her inside it, but as I can't even freehand a short straight line that idea went out the window and left me having to repaint the base.
       
      Then I remembered that last year I'd bought a set of accessories called Wizard's Study, or something like that (the packaging is long gone; I cannot remember the manufacturer but this company's minis are grey pre-primed plastic, so if anyone knows tell me in the comments.) So I dug them out of my bits box, picked a small pile of books and a clear bottle, painted the books and glazed the bottle and glued them in place, then attached the Whisperer.

      I thought the base needed another element so I cut some 2mm plastic rod into short lengths, drilled them out, inserted small pieces of brass wire for the wick and painted them to look like candles. I added the runnels of wax and the pool of wax using Liquitex modelling paste. Looking at them in the photos I should have used thinner wire.
       
      I'm happy with the figure and accessories, but the floorboards need to be better. I decided on black this time for a change and to give a strong contrast to the mini and other elements but as I can barely paint brown wood realistically, I should have realised that they'd look like stone.
       
      As always, comments and criticisms are welcome.
       
      I'm actually thinking about buying another set of these figures.
       

       

       
      It looks like there's a random flake of tan paint below her jaw. I can't see it on the actual figure, so it must have fallen off after I took the pic. I really have to remember to "dust" the minis with a brush before photographing them.
       

  • Who's Online   10 Members, 1 Anonymous, 37 Guests (See full list)

×
×
  • Create New...