Jump to content

Sign in to follow this  
catdancer

Puppet Booth & Art Gallery (WIP...Game play terrain)...

Recommended Posts

post-11942-0-53404800-1368994609_thumb.jpgpost-11942-0-24457900-1368994558_thumb.jpgpost-11942-0-74969700-1368994508_thumb.jpgpost-11942-0-63776400-1368994459_thumb.jpgpost-11942-0-62537600-1368994395_thumb.jpgpost-11942-0-98162500-1368994341_thumb.jpgpost-11942-0-11034400-1368994295_thumb.jpg

 

Hi Pingo! As promised, here is the raw (puppet show) booth...from your suggestion...to my art draft ideas...to the final raw execution...I think it will look very nice once it is completed! Again thanks for the idea!!!

 

Also pictured is (1) of the (2) open air (art gallery) booths that will be on the farmers market & renaissance fair tabletop game board...The booth will feature (8) fantasy related framed paintings (pictures)...(4) to each side. The paintings featured are just to show the general appearance of what it will look like (the shown paintings may or may not be the ones selected for final placement). The booth is still in raw stage with only the 1st stain application...still some work left to do with dry brush, inks and pastels...But it gives you the idea!

 

Booth #2 will be a smaller version that will feature (4) paintings...(2) on each side!...(Yet to be built).

  • Like 7

Share this post


Link to post
Share on other sites

Wow, that was fast. Those are lovely.

Both statements are pretty typical of Catdancer's work.

  • Like 2

Share this post


Link to post
Share on other sites

What did you use for hinge and latch hardware on the door? It is nice.

About 90% of the time; I just use dental sheet lead to make the hinges & handle plates...the door knob is the head of a pin. On a building that I am working on now; I used an "eye" pin & a jewelry (O) ring to make the handle. Dental sheet lead is very thin and easy to work with.

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Rat13
      So my daughter just had her first birthday a couple weeks ago and while plenty of people showed up we did end up bringing home a lot of leftovers, dessert in particular. We had about a quarter of a sheet cake and a few cupcakes too. Those cupcakes in particular though had a little something extra, topping each one was a plastic ring. Well I have to admit I couldn't help myself and the wheels started turning.
       
      After maybe a couple hours from start to finish my "Fabulous" guardsmen" now have a "Fabulous" barricade/firing line. With its very large coverage I think this piece may be better suited to Killteam than 40K though.
    • By odinsgrandson
      Here is our current adventuring party for Iron Kingdoms.  We started a new campaign shortly after Reapercon, so I was able to make use of several of the convention minis.
      This party is quite an odd mix of races.  Lately, I've been quite fond of having a semi-cohesive color pallet for our adventuring parties.  The last one I did was all in cold blues, so with this one I went for a very warm pallet.
       
      Lil is an investigator who 'secretly' is a Thamar Advocate.  She's just the stock mini of the vampire hunter from Reapercon (by Bob Ridolfi)


      This Pygmie Troll is very fond of hitting things and also alcohol.  He was made by resculpting the head and hands from the Jason Weibe's Dwarf Brewmaster (07015)


      Our resident Bone Grinder was made from Bobby Jackson's River Widow (03913).  I only made superficial changes to her (adding a few extra bone-grindy items to her belt).
      ]
       
      For our Trollkin Axe Flinger, it turns out that we already had the perfect mini.  This is the version from the Undercity Board Game.


      This Outcast Skorne Bushwacker/Warlock was made by simply head swapping a Malifaux rifleman.


      This Lazy Cyclopes (under the command of the Warlock) was a sculpt that I made quite a few years ago.  I showed it off to several sculptors at Gencon, and they all gave me some pointers on things that I could improve on.  Still, I was fond enough of him that I decided to paint him up.


       
    • By Rat13
      Awhile ago I came across a terrain tutorial video about building barrels and thought I'd give it a go. After the initial steps of collecting water bottle/soda lids, gluing them together, and even priming them the project came to a halt. Well after a couple months of staring at a bag of primed bottle caps I finally got back to work. 
       
      The next step in the build was to create an actual lid/opening in the top of the barrel. This required two pieces; it needed a small bead and a slightly larger round piece to glue the bead onto (in the tutorial the builder used small wooden discs they found at a craft store). I knew that my wife already had plenty of beads that would be perfect but that small round disc had me stumped.
       
      That's when I finally remembered that inside my wife's craft bin she had a hole punch. Since I started basing my models and began building a little terrain I've been collecting a lot of random household brick a brack, including baby formula tins and lids. You know where I'm going with this and I think the picture speaks for itself.
       
      Now that I finally had all the pieces I began gluing the discs and beads to the top of the barrels. After a little gunmetal grey I'm pretty impressed with how good they look and how quick they can be made (quick provided you don't spend too much time thinking about a single piece). I placed some Games Workshop barrels behind them for comparison. 
       
      I'm pretty sure this build came from Terrain Tutorial but I'm not positive (I did see the video quite a while ago). Either way I just want to say this wasn't my idea at all, I simply followed the steps I happened to remember from a youtube video I watched so long ago that I can't remember who did it. I'm grateful however for this simple and cheap terrain and will be making a ton of them over the next few days.
    • By Pingo
      I could have sworn I had started a thread already.
       
      Ah, well.  Here's a drawing I did related to a vampire game, with an enlarged detail to show pencil work.  It's 5 inches by 8 (12.7 x 20.3 cm).
       
       
      The detail is about 1.75 x 2 inches (4.4 x 5 cm).
    • By catdancer
      PROJECT...Shanty town outhouse (gift for a friend)...
       
      DATA...On August 6, 2014...I displayed a shanty shack that I built as a gift for one of the Reaper members who has become a close friend...this is the outhouse that goes with that shanty shack...My son and I just returned from a luncheon meeting where I delivered both the shanty shack and outhouse.
       
      I really enjoyed building these 2 small pieces and hope that my friend (ub3r) enjoys the final results.
       
      Paul (Catdancer) 
  • Who's Online   27 Members, 0 Anonymous, 165 Guests (See full list)

×