Jump to content

Recommended Posts

Was looking at the bases on the ones in the Preview section and started wondering just how wide the integral bases are. I've got some of the Chronoscope ones in the 30mm recessed bases they come with and was thinking about getting some of the 3 with assault rifles to convert into additional soldiers, so I was wondering if the new bases match the recessed area of the 30mm lipped bases?

Link to post
Share on other sites
  • Replies 6
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

The good news is that if it's too wide, you can literally trim it with scissors. Bones material cuts extremely easily compared to metal. Too small and a bit of filler (spackle, wood putty, green stuff) should be pretty easy. The only actual bad news is that it may be quite a while before those figures are available for retail purchase, what with one thing and another. Because logistics is *hard*.

Edited by kitchen_wolf
  • Like 1
Link to post
Share on other sites

They fit pretty well. I didn't spend a lot of time examining them, but I did pop one of them in a 30mm lipped base real quick to see if it fit. I'll try to remember to take a picture when I get home.

  • Like 1
Link to post
Share on other sites

My camera ran out of juice, so I couldn't take a picture, but I did check the basing. The IMEF guys fit almost perfectly into the inside of a 30mm round lipped. Some of them overhang by a little bit, but a hobby knife should fix that right up. Not all the Chronoscope figures have the correct sized base though. For example, 80004 Sascha Dubois has a round base that's a bit too small for an insert. Many of the fantasy characters have roundish broccoli bases that would also work well as inserts, if 30mm is your preferred size.

Link to post
Share on other sites

My camera ran out of juice, so I couldn't take a picture, but I did check the basing. The IMEF guys fit almost perfectly into the inside of a 30mm round lipped. Some of them overhang by a little bit, but a hobby knife should fix that right up. Not all the Chronoscope figures have the correct sized base though. For example, 80004 Sascha Dubois has a round base that's a bit too small for an insert. Many of the fantasy characters have roundish broccoli bases that would also work well as inserts, if 30mm is your preferred size.

 

yeah it is, mainly because I've used it with the ones I currently have (And a couple other minis I've found that seem to fit the aesthetics of the IMEF troops for specialists as a medic and tech).

 

Hoping we'll get both a Bones and Chronoscope version of Bulldog whenever he comes out

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Coffee Nerdery Beer
      Hi there all, I've decided to dive into the deep end with finally trying the scary world of OSL. 😄
       
      Feel I've lost the plot on this ... so any advice on how to proceed with this would be greatly appreciated! (Having fun, though, despite not knowing what the hell I'm doing. 😁)
       
      I'm including a "top down" view, which is where I'm most confuddled. That dark line down his arm which represents the shadow from the staff which sits between the source of light ... it just doesn't look right to me.  🤔
       
      So, I'm all ears for suggestions on improvements!
       
       


    • By MoonglowMinis
      Been a minute since I've posted a WIP, so I figure I'd roughly document my current paintjob.

      I'm running a 5e game with a heavy focus on the Shadowfell, and our most recent addition to the party is a native of that realm - a Hexblood or "Hexen" in our game lore. These dark fey are the children of hags - The Mothers Three - and are made from earth, blood, and stolen souls.

      Going for a dark but vibrant paintjob - blue skin, and dark clothing.


      After priming, I like to block in my darkest colors. It makes it easier for me to avoid missing a hard-to-reach spot later, but without worrying too much if I get some paint where it's not supposed to be.  This method also helps me to visualize and plan out my colors better.

      I was instructed to paint her with blue skin, black hair, and dark clothing. I started with the skin. I based with Rich Indigo and plan on working up towards Surf Aqua.  I'm hoping this transition from a more purple-hue in the shadows to a bit of green in the highlight will look interesting, as well as kind of capture the overall color scheme.

      I chose a few other colors to sort of represent that scheme and stippled them over the base - Rich Indigo, Deep Ocean, and Carnival Purple. I eventually want the base to look like rocky terrain, but wanted to avoid neutral greys.
       
      Pure Black for the hair and then set about base coating the rest of the mini.
       
      I wanted to avoid all-black or shades of grey in her outfit so dark greens and purples will be used to keep things more colorful. The tattered robes got a mix of Pure Black and Deep Ocean. The fabric wraps are Dark Elf Shadow - hoping to keep the purpleish greys.

      I also slapped some Deep Ocean on the gemstone on her staff for a pop of color - will reuse this for other gemstone details.
       


      The base got washed in Pure Black - will play around with some drybrushing later. Metal details also got hit with pure black to work up to some NMM silver.
       
      Settled on Ashen Brown for the bone details. The slightly cooler purple hue should help the bones blend in with the rest of the mini.
      Also hoping to use the Ashen Brown to highlight the hair without it looking grey.

      Not much to see so far - just some quick basecoating before work this morning. Hoping she turns out as I'm picturing and not just a garish blob.

      Side note - this sculpt is one of those earlier Bones sculpts that are quite difficult to pick out details.  I'm inevitably going to paint over some random blob and not notice until later.
    • By Pancakeonions
      Got my Reaper Bones V goodies a bit ago, and slapped some paints onto the Pumkinhead beholder.  I used Citadel Wraithbone primer, contrast paints, and Army Painter Matte varnish and...  months later it remains slightly tacky.  It's not...  awful.  But it's enough that if I put it away in a box with other minis, I'm afraid it won't mix well.  I've left it out in the sun for a day, thinking that might 'bake' the stickiness out of it...  It did not.  
       
      I got Reaper Bones because I figured I could paint, varnish and throw into a box with all my prepainted minis.  Some of my older bones remain slightly tacky too.  But I figured that with this new round of Reaper Bones, they would have got that figured out.  I've painted up the undead giant, but not yet varnished him and I'm afraid to!
       
      I've read the various Reaper Bones help threads, many of which are very old (and one sent me to Facebook, though it looks like it's no longer available.  I don't do social media anymore, so not sure?). 
       
      Does anyone have any advice to help a guy out?  I'm pretty sure I shook my rattlecan varnish adequately.  I do live in western San Francisco and wonder if the humidity (fog, it's often cool and misty regardless of the season) may affect this.  I try to wait until the weather is clear.
       
      What are you doing to keep your Bones stickiness-free?  Any advice you might have would be helpful.
    • By KruleBear
      This one has been on the desk for awhile to receive paint as there was extra on the palette. I decided to finish him off last night. Added highlights to the cloak and skulls. Shaded everything, but the cloak with Army Painter Dark Tone. I didn’t add any highlights or shading beyond the basics as it isn’t a great cast. But, I think it turned out great for the toy box. 


       
       

    • By Lidless Eye
      Here's a collection of the second batch of finished minis I have from Bones V.


      Party like a Barty.


       

       
       

       
       

       

       

      Yoho, a Pirate's unlife for me:


       

       
       
      Draugr...I mean, Rune Wights.


       

       

       

       

       

       

      They're not sure why they've been typecast as Thieves:


       
       
      "What do your Elven eyes see?"


       
       
       
      Kobolds, the only thing as dangerous as a Giant Rat in a starter dungeon.
       

       
       
      Under the Sea.
       

       

       

       
       





  • Who's Online   10 Members, 2 Anonymous, 38 Guests (See full list)

×
×
  • Create New...