Jump to content

Recommended Posts

Hi,

After finishing my Darkreach warband I'm moving to Razig.

I have almost all minis I need to build my army.

I would need your help on this project on both look and army lists. I have never used Razig in battle and I'm not going to use it untill I have fully painted playable army.

The good thing is that we play at low ponts. So army of 500 is fully playable. but I hope to start with about 800pts.

 

So before I'll post pictures of minis I need to warn you. This would be 100% unofficial models.

The most of this army would be made using minis and bits I bought some time ago and put them away at attic.

Yes this would be a way to recycle them. But I would stick as close as possible to Reaper minis look and try to keep same atmosphere around the army.

 

This army has one of my favorites play styles, and I'm not talking about shooting models. The dead fish doctrine. This is my thing. Pass DIS or you wont attack!

I'll write some more on this soon, stay tuned.

  • Like 3
Link to post
Share on other sites
  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Pancakeonions
      I am stunned at my recently arrived Sophie's Revenge, and so excited to get it to the painting table (I will have to significantly reconfigure my painting space to ensure I have enough room...  As well as buy LOTS of new brown paint, ha!)  It is a thing of beauty, even without a lick of paint on it.  
       
      One of the first things I noticed was how the magnetized masts SNAP to the deck, hard.  That's what you want, so they'll stay firmly in place.  But when you remove 'em, they'll likely scratch the heck out of the painted deck.  So I plan to cut disks of black felt to glue to the underside/ magnet-side of the masts, so that when they stick, they're more gentle.  Thin felt should not affect how they stick, but it should make a big difference on the ship's wear and tear.
       
      Are you planning on painting yours?  What strategies are you going to adopt to make it as beautiful as you can, while still keeping it sturdy as a plaything for your RPGs, wargames, or maybe even little kids (don't judge!  mine are gonna be all over this thing!) 
    • By insaniak
      StackaRack is a customisable plastic rack for miniature paints, designed to hold pots or bottles from any of the major manufacturers.
       

       
      Paint collections have a way of growing organically, and most of the current paint rack solutions out there are fixed to specific configurations, and made for a specific type of paint pot. If you're like me, and collect multiple brands of paint, that can make organising them a little frustrating, and so we thought we would try to fix that.
       

      StackaRack was designed to hold any of the major miniature paint ranges - from the dropper bottles used by Vallejo and Army Painter, to the tall pots from the likes of Privateer and Reaper (and GW's old range), and the current stubby Citadel pots. The injection moulded plastic parts will fit together with plastic clips, allowing you to build it how you like, and disassemble and reconfigure it as needed.
       
      Check out the project live on Kickstarter here: https://www.kickstarter.com/projects/spiralarmstudios/stackarack?ref=acpi8t
    • By SparrowMarie
      I'd never felt I had an artistic bone in my body until I started painting minis. Well, now, I decided I'm going to try my hand at 2D art. 
       
      I am following along Bob Ross videos on YouTube. I will note, and this is probably very important, that I am using acrylic paint and not oils. I did not want to spend oil paint prices since this is a new thing for me.
       
      These are the two I've done:
       
      Day 1: I learned a lot, I needed to do something with my paint to extend the drying time. This would have helped with the blending. Overall, happy with it excepting the house.

       
      2: I used some slow dry medium mixed into the paint today. Not sure if it was not mixed well enough or I didn't use enough but it only gave me like 5 minutes or less of extra working time. If anyone has any suggestions for how to use slow dry medium, please, let me know. I'm using heavy bodied acrylic tube paints.
       
      I followed along until the end and I decided to add some darker blue and green. I think that helped a lot.
       

       
      Another note, need to find sturdier paper. While this is holding up it likes to curl slightly while drying. The second one is taped to the desk on the back to try to minimize that problem. I am currently using a mixed media paper.
       
    • By Brianuk
      I got a skeleton as part of a job lot of Tomb Kings soldiers. It was neatly painted but missing an arm. I used the chain and cutlass from the Reaper Razig weapons sprue, and made a hat out of green stuff. The missing left arm is from the Frostgrave cultists sprue.
       
      I'm no sculptor but the hat was really easy. I just followed a YouTube video. The base was again just modelling paste for sand, then mod podge for the water. 

    • By Durham
      So how do I paint something with a marble effect? I have a sepulcher or sarcophagus, primed light grey, and I want to paint it like it was made from marble. Any ideas or tricks? Colors? Anything? Bueller?
      If it helps, its the one from the Horror subset of the Bones 4 Kickstarter.
  • Who's Online   15 Members, 1 Anonymous, 18 Guests (See full list)

×
×
  • Create New...