Recently Browsing 0 members
No registered users viewing this page.
This is Tamiya's 1/35 scale Sherman Jumbo - a significantly up-armored Sherman tank designed to be at the head of advancing columns and function as an assault tank. Two hundred and fifty-four were built through the spring and summer of 1944 with the first batches hitting the European front in the fall of '44. All were initially armed with a 75mm gun. A number were later converted to the long barrel 76mm gun because it fired a more effective high-velocity anti-tank round. The Sherman Jumbos served through the end of the war in Europe.
Tamiya's kit dates back to 1987 and is based on Tamiya's standard M4A3 Sherman tank issued in the early 80s. Tamiya added a new larger turret, new armor plates for the upper hull sides, and a new glacis plate for the hull front. Unfortunately, they neglected to provide a new and much larger front transmission cover. Numerous reviews have also mentioned the turret shape and size are off, but I've yet to read/hear where it's off or by how much. I spent some time looking over book and interweb pics and the height of the turret might be a bit low. Maybe. I believe the Jumbo is out of production, but the originall M4A3 is still available. Not worry; new, more detailed and more complex Jumbos are available.
I've built a new transmission cover using the old cover as a foundation, then adding sheets and strips of Evergreen .040 plastic to beef it up. The turret height was raised with .030 strips of plastic between the upper and lower turret halves. Additional details were added to the hull and turret - basically anywhere you see white, copper wire, brass, or green putty. I also used a Dremel tool and a small dove-tail cutter to enhance the very prominent hull weld beads. The case transmission cover and the turret sides were coated with liquid glue (in sections) and stippled with a siff wire brush to replicate the cast texture of the real items. You can see the turret texture in the photo.
The pic shows the mocked up upper and lower hull components and the turret, three of the six bogie wheel assemblies (three more on the other side), the mantlet, and turned aluminum gun barrel. Painting next - any color you want as long as it's olive-by-God-drab.
Qs and Cs welcomed; no secrets here...
As promised, here are the postings of the secondary building that goes with the previously posted wharf workshop. This building is again 98% scratch built...it has no interior details (only the exterior).
This brings to a close my postings of non-fantasy items. I hope that you enjoyed viewing the (3 such postings) as much as I enjoyed the presentation of them and wish to thank all the members for their comments and I am sure in some cases...their toleration of my posting my nostalgic memory materials.
Having spent my youthful summer vacations from school at places like Vaca Key, Breton Sound and Alazan Bay; I learned a great deal about boat repair and salvage work by doing all kinds of jobs at small wharves and deep sea salvage firms.
This piece is from those youthful days and memories...It is 98% completely scratch built (example: the paint cans are drinking straws...the hot water heater is a cigar tube...the sink is fashioned out of heated plastic sheet...the coffee pot, fry pan and other items are made from sheet lead...and so on. The non-scratch built items are all parts from my extensive parts box.
This is another piece that allowed me extensive usage of my term " organized chaos "...I have been working on this piece (off and on) for about 3 years...maybe one day I will finish it...but until then, each time I take it out and work on it...it brings back those youthful memories of yesteryear.
There is a secondary building that goes with this piece (no interior detail...just exterior) that I will post later today or in the next few days.
Hope that you will enjoy viewing both of these pieces of nostalgic memorabilia from the life of Catdancer.
As a change of pace from my fantasy miniature painting and fantasy terrain building; I work in the modern era in areas that deal with modern mercenary models and figures. This is a (Congo Keel Boat).
On the river it is known by the common name of (river taxi)...the version depicted here is (23'6") with a draft of (2'4")...used for moving just about anything on the Congo river system. The most famous version of this boat (a longer version) was depicted in the 1951 movie (The African Queen) with Humphrey Bogart.
The model is 97% scratch built in the 1/35th scale area and in the " princess " line of such boats that were common from about 1928 to current day on both the Congo and Nile river systems. My figures (in the works currently) are a modern day (5 man) mercenary team using converted pieces/figures from the 1/35th scale U.S. Ranger team produced by (Shanghai/Dragon).
The 3% non-scratch built items are all items from my parts box...all lumber used was scale hardwood...As you can see, the cabin section can be removed.
Who's Online 12 Members, 0 Anonymous, 37 Guests (See full list)