Jump to content
Sign in to follow this  
Teskal

printable improvement for modern or SciFi Bases or Terrain

Recommended Posts

Here are some cool PDF files for basing:

 

News Papers, Magazines, Beer Cans, Waning Signs

On page 55: more News Papers, Magazines, Cans, DVD's and others

Oh, important, on page 54 you can see how you can make Coke Cans with a Q-Tip!!!!

 

Different Police Lines and Warning Signs (does not work anymore)

 

If you do know more similiar Documents or Pictures, please post them!!!

Edited by Teskal
  • Like 3

Share this post


Link to post
Share on other sites

Hi Teskal;

 

A very useful thread that you put up here...it should be of great help to a lot of people who want to add details to their bases, vignettes and/or dioramas. I have posted a few that I have in my files and that I use (I have over 50 such selections in my file)...Hope this is what you wanted posted.

 

Paul (Catdancer)

  • Like 2

Share this post


Link to post
Share on other sites

Hey Paul, unless yours are copyrighted, do you think you could post yours up for general consumption on say an outside source on the cloud. Such as a dropbox link or google documents link? If you need help, let me know and I'd be happy to explain exactly what I mean.

Share this post


Link to post
Share on other sites

Hey Paul, unless yours are copyrighted, do you think you could post yours up for general consumption on say an outside source on the cloud. Such as a dropbox link or google documents link? If you need help, let me know and I'd be happy to explain exactly what I mean.

Hi ub3r_n3rd;

 

I have no idea if these images are copyrighted or not...since most are generic in nature and I do not use them for commercial (money making) purpose...I really do not worry about it and have been doing it for years.

 

As far as doing an off site posting...you know the problems that I encounter when I try to do things like that...so I am not going to attempt to do that...but thanks for your offer to help.

 

Paul (Catdancer)

Share this post


Link to post
Share on other sites

It is sooo cool, thanks.

I think most files like this should be possible fair use or not?

 

Everyone who has more, please post them. :-) Street Signs, Posters in 28mm scale...

  • Like 1

Share this post


Link to post
Share on other sites

awww the dollar bills are soooo cute!!!!!!! Now I want to order from the tiny tiny menus.

 

I don't need this stuff, but thank you for posting it. Sharing is the best!

  • Like 2

Share this post


Link to post
Share on other sites

Following I found in the DakkaDakka Forum:

 

CDK's Decal Sheets

491478_sm-Hazard%2C%20Industrial%2C%20Si

 

 

awww the dollar bills are soooo cute!!!!!!! Now I want to order from the tiny tiny menus.

 

I don't need this stuff, but thank you for posting it. Sharing is the best!

 

Sorry, the waitress was eaten by Zombies...

 

  • Like 4

Share this post


Link to post
Share on other sites

I just realized if I ever make terrain for Zombicide I could use these.  With my current to do list it will have to until I get reincarnated as something with hands again.

  • Like 1

Share this post


Link to post
Share on other sites

I just realized if I ever make terrain for Zombicide I could use these.  With my current to do list it will have to until I get reincarnated as something with hands again.

 

this is the main reason why I'm collecting them.

  • Like 1

Share this post


Link to post
Share on other sites

If this becomes a useful collection of resources, I can possibly pin it.  

 

If so, please keep the chatter to a minimum.  Also please make sure you're not violating any copyrights and give attribution wherever possible.

  • Like 1

Share this post


Link to post
Share on other sites

Teskal, your third link in the first post: Different Police Lines and Warning Signs is a bad link.  It goes to some random site with no signage.

Edited by Qwyksilver

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SamuraiJack
      https://www.kickstarter.com/projects/625262290/3d-printable-fantasy-ruins?ref=discovery_category_newest
       
      Story
      Here is my collection of fantasy ruins the can be 3D printed for tabletop games.
      The pledges will be delivered as STL files for you to print on your home 3D Printer.
      Disclaimer: i do not own a 3d printer yet so i have not test printed these models, if you find any error let me know and i will sort out the meshes for you.
      All models have been checked for errors in mesh-mixer and a couple of them will need to be sliced to fit onto smaller build plates some of them already fit onto a 300 x 300 mm plate.
    • By Rob Dean
      I haven’t really been getting a lot of painting done, but I sat down at my painting desk the other day and noticed that I had two buildings sitting over in one corner, neglected for a couple of months, and decided to start adding paint.
       
      This one is from Apocalypse Miniatures.  They ran a Kickstarter back in 2017, and my brother and I both ended up backing this.  In my case, I backed it to the extent of 10 buildings, of which this is the second I have finished. The first was back in November.
       
      In general, this wasn’t too bad to paint.  The little detail bits molded into the base look nice in the pictures, but I would really prefer that they were not sculpted in; it detracts from the flexibility of the building somewhat.  Sizewise, these are a little small for Reaper figures, and are probably intended for a 28mm scale (e.g. Metal Magic, mid-period Citadel, later Ral Partha), but that’s always negotiable when deploying scenery.  This building is a SOLID block of resin, so the game will be played around it rather than through it, and I would as soon buildings in that mode be a bit underscale anyway.  When I say solid, I put it on my kitchen scale, and it’s just a bit over two pounds (935g for those in countries with sensible measurement systems).  You wouldn’t want to drop it on your toe.
       

       
       

       

       

       
      As for the building name, that’s how it is spelled on their web site...
       
    • By Lidless Eye
      Recently completed: The Shipwreck 3D printed from the Kickstarter set Depths of Savage Atoll, by EC3D Designs.


    • By Inarah
      Coming in March.
       
      "3D printable STL files for RPG / wargaming - support-free minis, terrain, and vehicles for your Scifi and Cyberpunk game tables."
       

       

       
       
       
      https://www.kickstarter.com/projects/ecaroth/the-ignis-quadrant-3d-printable-tabletop-models?fbclid=IwAR1Qe9ssykZnV46G-nOv7it4jq_Flry7L4Fufx8_wFOl_-AkRt8Poj8eesQ
       





       
       
    • By Thrym
      Wire Tree
      Scratch Built
       
      The Twist
       
      One Friday evening as we played Batman: Talisman I twisted a tree to life.  Formed from 13 strands of wire of approximately 12-inches in length, the tree takes shape by folding them in half and twisting the loop created into the trunk of the tree.  The loop created is cut into the roots and the longer tendrils are twisted into limbs and branches to form the crown of the tree.
       

       
      As you can see in the picture, I used one of my Armstrong sample tiles to make a base for the roots and glued it in place with some Loctite Gel Glue.  The idea is to form irregular surfaces to cover and create the illusion of a real trunk, roots and limbs.  The crown will kind of solve itself when the canopy is applied later.
       
      The Ground and Bark
       
      Once you have a "skeleton" for the tree, it's time to add the skin.  To do this there are a number of ways.  You can use liquid latex.  You can apply green putty or green stuff.  I chose to do the super glue and baking soda method.  You've probably seen my work with this insta-cure method before on Frulla Krung and other Frost Giants.
       
      I use super thin, insta-cure cyanoacrylate (super glue) that allows it to run well over the wires and base and then coat that with the baking soda. The squeeze bottle, shown in the background, allows me to apply it as a wind blown sediment or just to dust it over the glue. The opposite can be done where you make a pile of baking soda or fill the crevice you want covered and apply the super glue carefully so you don't get an impact crater.  Of course, maybe you want impact craters.
       

       
      As you can see above, the effect is quite "chilling."  Be careful of fumes.  It's still super glue.  And super-thin super glue runs everywhere so I suggest putting down something you don't care about.  I use box lids.
       
      The Crown
       
      Once you have the coating applied to your liking, it's time to finalize the branches and make the crown.  Here's where random is your friend.  Twist the strands into limbs and then twist off the limbs into branches.  You can create burls and broken limb ends by adding sharp turns with your pliers.  In this case, I left the crown relatively open.  It's a small, young tree after all.
       
      You can see another much older tree in the works behind it below.
       

       
      Our specimen is primed as well.  I added curlicues at the ends of the branches to eat some excess wire and for extra hook points for the canopy. 
       
      The Canopy
       
      The next step after this is to paint the trunk.  I used a pair of FolkArt Pickling Washes to achieve this.  The first was a dark gray, FolkArt Stormy Sky.  To add body to the paint in order to help fill some of the wire gaps, I mixed in some Liquitex Matte Medium.  Once the basecoat was applied.  I drybrushed the trunk, roots and limbs with FolkArt Cottage White Pickling Wash mixed with some of the Stormy Sky mixture.  This gave me a nice light ashen color to the bark.
       

       
      The canopy is made from Woodland Scenics Tree Canopy Green and Yellow mixed with essentially some static grass I got off of Wish.  I mixed them into my Hamilton Beech Grinder and ground them down further.  You'll prolly have noted that there are some wires visibly still.  This has been noted.  I ran out of mixed canopy.  I will be making another batch shortly to finish it.  I used a spritz bottle of glue from Dollar Tree to apply the canopy.  It worked really well.  Once it was set, I used my favorite finish coat to solidify the canopy, Testors Dullcote. 
       
      What's Left
       
      That's where it's at as of now.  As to next, I will be doing a wash of the canopy to add shading to the tree.  That will carry down the trunk and roots.  Then I will apply an umber paint to the ground and a mixture of cork and bark, ground down in my grinder, over that.
       
      Stay tuned, Stay Well and Enjoy
  • Who's Online   29 Members, 3 Anonymous, 37 Guests (See full list)

×
×
  • Create New...