Recently Browsing 0 members
No registered users viewing this page.
I put two entries into the recent Reaper Facebook Convert and Paint contest. This first one didn't get many votes, which doesn't surprise me as I think not too many people knew what it was and it was on the weirder side. Plus the paint job itself was kind of bland. But I like the idea of it because of what it is. It is a tikbalang - a malevolent, mythical Filipino creature that leads travelers astray or plays tricks on them. It has a horse's head, a bony body, and long, disproportioned limbs.
I used these minis to make it. The wendigo's head was chopped off. Then I took the head of the Silverhorn, removed the horn and did some filing and sculpting to get it to join properly to the body of the wendigo. Very minimal green stuff use outside of filling seams; I filled in the wendigo's hooves, which were cloven, and rebuilt a bit of the mane so it joined smoothly with the rest of the body.
And I saved the body of the unicorn. At some point I'll have to convert it into a centaur!
Haven't post anything here for so long...
I'm not really following any color scheme here, since I am not familiar with the lore of CAV at all (I'm more interested in the game).
Also I wish I learnt a bit more about painting technique for glowing effect before painting the windows...
By Dan d'Lyon
Can't believe I missed this one until now. I didn't have a printer during their previous projects, but I'm definitely in on this one. Less than 48 hours to go. Link added.
Seek adventure amongst the stars! Explore strange new worlds, smuggle illicit cargos across the hyperspace lanes or launch a space to ground assault, in your Scout Ship, Transport, or Space Shuttle!
Somewhere in the outer reaches... Starship III introduces three original, fully 3D-printable spaceships scaled for 28mm play in your favourite Tabletop RPGs or Wargames. Complete with OpenLOCK-compatible modular interiors, the ships are detailed inside and out and a variety of configurations can be used to customise the deck plans.
Each ship comes detailed inside and out (Scout ship standard interior shown here) As the campaign unfolds, new starship hull variants and modules will be unlocked as stretch goals to bring even more variety to your game and increase the pledge value for everyone.
Each pledge is designed to be printed on your own 3D printer or via a print service, allowing you to print as many parts as you like, for non-commercial use. Deliverable files will be made available digitally in STL zip packs via DriveThruRPG.com (see Printing Requirements details below for print bed size requirements)
Hangar 01: Space Shuttle Alpha Need a way to get your units from the ground to orbit? This space shuttle is fully modular and can be configured as a dropship, cargo shuttle, or even a small starship. The stock standard aerodynamic fuselage comes complete with manoeuvring thrusters, sensors, landing gear and articulated main thrusters for VTOL operations.
The standard layout below is included in any pledges that include the shuttle Modular standard deck plan of shuttle interior. Hangar 02: Scout Ship Beta Explore deep space and final frontiers with this full 28mm scale scout ship, designed stock-standard for long haul endurance scout missions. Includes two manned turrets for defending in rough territory, a full sensor suite package for scanning new systems, a well equipped engineering section, cargo hold, living quarters and a 5-station forward bridge.
These are the unique parts that compose the scout ship interior, which come as a part of any scout ship pledge Closeup of the Engineering Standard Deck Plan for the Scout Ship Beta Hangar 03: Transport Delta Cruise the hyperspace lanes in this high-speed transport. Haul cargo - legal or illicit - with two massive engines to get you from point A to point B. Manoeuvre with the fluidity of repulsor technology and defend yourself with manned or unmanned turrets and a powerful shield generator.
Just noticed this KS was posted here. Only 53 hours left....
Here we are folks, WOWBuildings is expanding further into space, with the infrastructure now for several types of scenarios, this KS will be a mix of vehicles and Buildings so you will have an even bigger range of choices for your tabletops. all will come in STL format and cuts will be made where needed so boot up those 3D printers once again and jump on board for what hopefully will be a great sack full of goodies to enjoy.
I am adding a couple of special adds that are for personal print use only as a little treat for you top end backers, all files will be initially 28mm scaled (but slightly over scaled to allow for GW sized figures) and optimized for 15-32mm scales so hopefully something for all.
Again human based faction designs for this KS with other races in the pipeline if all goes well, so hello again and as usual keep the feedback coming and if you want anything specific added then just ask, if it can be done it will be so
Stretch Goals as you see will start at £1000, and £500, but this time i am toying with adding some £250 jump points too here and there to add to the fun.
I have tried to keep the pledge level prices as low as i can as well including the licence which is an absolute bargain price for this KS as a thank you for continued support and to help with those after Xmas blues.
£10 Road Builder
£30 Asteroid Miner
£40 Planet Settler
Non Reaper 40mm+, Bust, and Diorama entries only. No more than 4 images per entry please.
No chatter or questions, please. Use the Rules and Questions thread.
Who's Online 37 Members, 2 Anonymous, 163 Guests (See full list)
- Knight of the Dinner Table
- Cranky Dog
- Chris Palmer
- Lars Porsenna
- Paradoxical Mouse