Recently Browsing 0 members
No registered users viewing this page.
StackaRack is a customisable plastic rack for miniature paints, designed to hold pots or bottles from any of the major manufacturers.
Paint collections have a way of growing organically, and most of the current paint rack solutions out there are fixed to specific configurations, and made for a specific type of paint pot. If you're like me, and collect multiple brands of paint, that can make organising them a little frustrating, and so we thought we would try to fix that.
StackaRack was designed to hold any of the major miniature paint ranges - from the dropper bottles used by Vallejo and Army Painter, to the tall pots from the likes of Privateer and Reaper (and GW's old range), and the current stubby Citadel pots. The injection moulded plastic parts will fit together with plastic clips, allowing you to build it how you like, and disassemble and reconfigure it as needed.
Check out the project live on Kickstarter here: https://www.kickstarter.com/projects/spiralarmstudios/stackarack?ref=acpi8t
So i've got that trio of spiders from nolzur's.
They do not come with sculpted bases - unlike most of the nolzur's line. This isn't a huge issue, except that these suckers have a bunch of tiny spindly legs. I am worried about getting a good hold.
So I have a few questions:
1: how to fasten these guys to a base? Just glue the legs and hope, or pin them through the body like a flightstand?
2: how to sculpt/or assemble, suitable bases to compliment their spindly nature and ensure a better hold.
3: how to attach the spider in a way that I can paint underneath it OR should I find a way to glue it down after both parts are painted?
So the webbed victim shown in the photo above I have decided to leave out as a piece of scatter. There is a stone base (not pictured) that I have already glued to a reaper base for one of the spiders. Each of the spiders has a slightly different pose with their legs - which is made worse by them being bent out of shape. I'm hoping to use this as an advantage though, and pose each spider differently. One is rearing back with front legs up (this one I plan to glue to the supplied rocky base with the abdomen glued to the ground for extra support.
Another spider has one side of legs kind of bent under a bit. I'm thinking this would look good mounted sideways, crawling up the side of a fallen log (not sure if I should try to sculpt this, or find a twig to glue to the base).
The last spider is pretty neutral, but I was thinking of posing it climbing down something just for variety.
Any advice about sculpting the bases vs gluing organic material or mounting something with narrow points of contact would be tremendously helpful. My indecision has lead to two weeks of no painting.
I'd never felt I had an artistic bone in my body until I started painting minis. Well, now, I decided I'm going to try my hand at 2D art.
I am following along Bob Ross videos on YouTube. I will note, and this is probably very important, that I am using acrylic paint and not oils. I did not want to spend oil paint prices since this is a new thing for me.
These are the two I've done:
Day 1: I learned a lot, I needed to do something with my paint to extend the drying time. This would have helped with the blending. Overall, happy with it excepting the house.
2: I used some slow dry medium mixed into the paint today. Not sure if it was not mixed well enough or I didn't use enough but it only gave me like 5 minutes or less of extra working time. If anyone has any suggestions for how to use slow dry medium, please, let me know. I'm using heavy bodied acrylic tube paints.
I followed along until the end and I decided to add some darker blue and green. I think that helped a lot.
Another note, need to find sturdier paper. While this is holding up it likes to curl slightly while drying. The second one is taped to the desk on the back to try to minimize that problem. I am currently using a mixed media paper.
So how do I paint something with a marble effect? I have a sepulcher or sarcophagus, primed light grey, and I want to paint it like it was made from marble. Any ideas or tricks? Colors? Anything? Bueller?
If it helps, its the one from the Horror subset of the Bones 4 Kickstarter.
Who's Online 17 Members, 1 Anonymous, 39 Guests (See full list)