Jump to content

77120 :: Vaeloth, Hellborn Paladin for Reaper Winter Exchange


Recommended Posts

Vaeloth, Hellborn Paladin

Winter Exchange mini for RobinH

 

Vaeloth_Final_Front_Right.jpg

 

Vaeloth was chosen to be my Winter Exchange piece for ... certain person yet to be revealed ... and when I decided on him, I spent a little time working out what I wanted to do for a scheme for him. Firstly, I knew I didn't want a classic tiefling saturated red for a skin tone and I also didn't want to do a shining knight look for his armor and such. Especially since he had a more rustic wolf pelt on his back for a cape.

With that in mind I did decide that I wanted him to have a purplish, regal, cast to him to give him a look of royalty. The shield was such a blank canvas and all that space cried out for some form of heraldry but when I got the red on it I couldn't bring myself to mar it. I also decided he needed layering colors in his armor and went with red for the primary pieces to match his shield, purple for his undercoat and the scale sleeves and then a light blue mixed with some purple to get a less saturated blue for the lower scales.

This is the first time I've used cork to make a rock base. I felt it wouldn't stand up to holding Vaeloth to the base if I didn't pin something together so I added a pin on his left foot/leg and that connects to the plastic base beneath the cork. And then glued it all into one piece. There's a bit of ballast in the crevices to makes some smaller rocks. I like the overall effect of the cork but am unsure if I will use the technique much.

 



Here's an detail look at the black rune on the ground in front of Vaeloth.  A remnant of his integral base.
 

Vaeloth_Final_Feature.jpg
 
View the WIP Posts:
 
 
Posted to the Inspiration Gallery.
Edited by Thrym
  • Like 17
Link to post
Share on other sites
  • Replies 6
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Very nice!  I like it.  You did, however reveal the recipient at the top of your picture.  Might want to edit it out if you still intend for it to be a surprise.

 

He posted his receipt of it last night.  :)

  • Like 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By R2ED
      Gotta love the weekend.  Time to get caught up on some minis!
       
      This particular mini is sentimental to me.  I had picked them up back in 1990 when I was just finding my way with painting.  Sadly, it would only be a few years before I found sports and other things to occupy my time and left the hobby for 30 years.  
       
      30 years later, though I'm rearing to go!  My parents send these minis to me that they found at the old house and I happily take them.  A few were somewhat painted and a few were only primed.  This is one that was somewhat painted, but nothing I felt reluctant about stripping.  That said, let's get to the painting!
       
      Battle Report!
       
      Wins:
      * Stripped this metal model right down to the bare metal with the ol LA Cleaner.  Holy smokes - that stuff eats paint like a champ.  Leave it in there for a few days and it is practically falling off.  Major win to discover this very inexpensive and effective method.
      * Primed this model with Stynylrez Black and zenithal with DR White ink.  Worked out well, but still have some learning to do with the new airbrush (Badger 105)
      *  The primer and ink dries quickly allowing for work immediately after priming.  Yay!
      *  Once again learning my new training gained from RVE with using white, I figure this tunic would be perfect for a Paladin.  Using dark grey, then mid grey, and finally light grey to a white highlight.  It worked great and looks believable.  However, there is still a bit more blending I could learn going from dark to light.  For this being the 2nd one to test this method on only hours within learning it - Win!
      *  Tested a gradient on the sword.  Since my confidence was high and I was feeling saucy, I wanted to give a gradient a test.  I've often wanted to try doing something else with metal, but this seemed like a nice one to try.  I think the dark to light worked well on the blades.  This is only the first of many steps to getting to NMM, but it's a good start.
      *  Used a aluminum color for the chain mail, then shaded it with GW Drakenshade. I kind of like the blue tint and nice use of it being like a 'blue steel' look.  Dig.  
      *  Going light on metals was definitely the way to go.
       
      Misses:
      * Face still feels a little weak.  Used a Flat Flesh up to Pale Skin with two gradients in between.  It still feels spotty.
      *  With the lips I tried adding some warmth to them with a light red glaze.  Meh...
      *  Swords and dagger after I did them, I realized don't have the same direction in their gradient.  It's a small thing, but once I spotted it, Ican't take my eyes off of it.  Minor detail, but sucks that I didn't catch it earlier.
      *  I am not super happy with the boots/gloves leather . I feel like Ishould have gone with a different leather color.  Not bad, just not great.
      *  The gold coloring on the moons was added after.  I originally had them as a silver color, but it didn't look as good on the skin in silver.  So I swapped the circlet to gold . In doing that Ichanged them all and am not as happy with the gold.  May change back.
       
      This was a really fun one to do.  It's a bit smaller than the other minis because of the older style, but what a trip down memory road to paint it.  
       
      Any thoughts?  Any feedback.  Let me have it!


    • By Maledrakh
      From the first Bones kickstarter:

      I am diving into some more of the white-undercoated Bones 1 models that are cluttering up my Drawers of Doom, models that for some reason or other have been stuck in limbo never to get to painted-heaven. These Bones are mainly painted with Contrast Paints for speed.

       


      This is 77119 Sinessa, Hellborn Sorceress.

      It was part of the "Bedevilled" subset of the Bones 1 Core set.

      Sculpted by Bob Ridolfi. 25mm base.

       
      The Skin is Flesh Tearers Red Contrast with a careful drybrush of thinned Citadel Wazdakka Red Layer on. The Gold is Vallejo Necro Gold and old Chestnut Ink.
    • By Vytau
      A few weeks ago I posted my Paladin (Essach Stonebreaker) converted from a bones Duke Gerard miniature.  This is that same character, but advanced to more heroic levels (we'll see if he actually lives that long in this campaign lol).  
       
      Presenting Duke Gerard in metal, converted to hold a mace / morningstar / scepter from the "Good" weapons pack from Bones III. 
       
      Like:  First attempt doing anything like the landscape on the shield.  Generally good depth of color.  Got the face much, much better than on the plastic version (part of that is thanks to the sculpt though...better detail). Better management of blonde hair on a pale face, which is tough since that risks being very low-contrast (and by proxy, low-interest).  Better at abutting color - I'm still too reliant on black lining for my line work, which leads to deep shadowing...not always a great look. 

      Needs work:  Smooth lines, patience...I'm not painting at tabletop speed or anything, but I'm probably still working too quickly to accomplish show-worthy painting.  Looks great at arms length, but I can notice the hell out of flaws, lumps, and bumps as I get closer.   

      Still, it's a step forward for me.  Additionally, I finally got a light box so I can improve the pictures just a wee bit!  In fact, the little white flecks on the substrate are from a previous mini photo shoot ( a white dragon, which I will post later).  My next goals are 1: to get better at slowing down and smoothing out my lines and 2: to work on my mini photography. 

      Anyhoo:  here's Duke Gerard, converted into my 5e Paladin of Lathander, Essach Stonebreaker! 

       



    • By Vytau
      Duke Gerard converted into my current D&D 5e character (a paladin of Lathander).  Generally happy, except for the face AND ALSO the highlighting on the shield came out too sharp on the black portion.  Will probably go back over it.  The head sculpt is...well...shallow detail and an offset cast.  I did what I could with it. Also put a little too much trust in the "fair skin" triad...low-contrast compared to other triads.  Had to go back with a flesh wash, repaint...got a little lumpy.  
       
      The rose-hewed cloak is for Lathander.  The red-black-gold shield is his family crest. Clipped off his sword and replaced with a mace from the weapons pack. 
       
      100% reaper paints including the steel triad, fair skin triad, gold triad, dragon red & flesh blood.  Black wash on the armor, sepia wash on the gold accents.  Hair is buckskin pale over leather brown.  Rose color is a combination of dragon red and khaki highlight. 
       
      This represents the character at level 5 or so.  Hoping he survives to 10, because I'm painting Duke Gerard in metal to represent a more advanced version of this character. 
       
       



  • Who's Online   17 Members, 0 Anonymous, 34 Guests (See full list)

×
×
  • Create New...