Recently Browsing 0 members
No registered users viewing this page.
My 5 1/2 yo son is super into Batman. I had set up a Pathfinder game for the grownups, but only filled 2/4 seats. My son has shown a little and growing interest in tabletop gaming. So I made some stats for Batman as a Pathfinder character and used his LEGO Batman on the battle grid.
Here are how it came out: attributes were rolled.
Class Ranger (Urban) lvl 1
Dex 19 (+2 human)
Favored Class Ranger +1 HP
Trait: Rich Parents
Trait: Deft Dodger (+1 Reflex)
Favored Enemy Humanoid (human)
Feat - Improved Unarmed Strike
Feat Human - Exotic Weapon Prof - Shuriken
Skills - don’t remember exactly, sheet isn’t in front of me:
Acrobatics, Craft (alchemy), Disable Device, knowledge (local), perception, Survival, Stealth
Gear- I took some liberties here for flavor:
Mwk Studded Leather, Batarangs(shuriken shaped like a bat available in a lethal or non lethal variety), smoke bombs (combine thunderstone and smoke stick in one thrown item same price as both combined), Mwk thieves tools, sap, spiked gauntlets x 2 (his sharp things sticking out of his arms), Grapnel: (Light Crossbow + 50ft silk rope + Mwk grappling hook + 100gp to account for the “gnomish winch”) I would have loved to make it a hand crossbow, but didn’t want to waste two feats on exotics. I just tacked on cost to the various gear to use up the gold from rich parents and still leave him with a good kit.
He made level two and I chose an alt. Option for weapon style: thrown weapon. That gave him bonus feat of Precise Shot without needing Point Blank Shot, but I plan on adding it later.
Let me know what you think.
My son didn’t have the attention span to stay at the table for long: his cousins were in the pool, so he ended up there. My friend always plays the Cleric, but he ran Batman as a second character and had a blast with it.
By Xiwo Xerase
BattleTech is one of my long time loves for games and it's what got me into the miniature hobby. I have actually been avoiding painting my BattleTech minis for a while so I'm hoping this will give me some amount of momentum.
The four miniatures featured in this WIP thread are, from left to right:
Catalyst Game Labs Cyclops, plastic, from the Fire Lance Pack. Iron Wind Metals 20-200, Griffin GRF-6S, metal (standing in for a Griffin GRF-3M). Iron Wind Metals 20-211, Archer ARC-8M, metal (standing in for an Archer ARC-2R). Catalyst Game Labs Catapult, plastic, from the Fire Lance Pack.
These make up the Fire Lance of the Marik Militia company I have painting off-and-on (mostly off). The colors of the Marik Militia are purple, with blue highlights on one side and red highlights on another. Here's an example I've already painted:
The metal minis have been based using Iron Wind Metals hex bases. The plastic minis have been removed from their integral plastic bases and based on Proxie Models plastic hex bases. All of the minis have been glued via glue gun onto little holders I made from spare parts (PVC pipe, a wooden dowel, and washers). These are mounted via magnets on my normal painting holders (plastic tubes with a squared base). The point of the holders is for easy removal from the holders for photography. (This was actually my first time using a glue gun so if some of the minis look crooked compared to the base, that's why.)
The minis have been primed white using Reaper Brush-On Primer and then painted with a mix of Brown Liner, Brush-On Sealer, and water to show details. (All of them but the Archer were painted using a 1:2 mix of Brown Liner and Brush-On Sealer. The Archer was painted using a 1:1:1 mix of Brown Liner, Brush-On Sealer, and water.) The bases have been covered (or filled) with paver sand glued down with superglue. (I'm pretty sure I picked this up from @Weird-O.)
Here's an obligatory picture with Sir Forscale:
I've included pictures of the minis in spoilers:
I'm going to point some of the obvious mistakes to get those out of the way:
There are some mold lines that didn't get filed down. There is some detail that should probably have been enhanced (for example, filing down more on the Griffin's missile pod and recreating that detail, or drilling some of the missile launcher holes deeper). Some detail in the Archer's missile launchers has been obscured by CA glue and will need to be recreated with paint. (Gluing on the missile launcher doors was painful.) When the Catapult was removed from its integral base, it's outside toes were mangled. Neither of the metal minis are pinned. This is a pretty big mistake and will be painful if either of then fall.
Some of these mistakes won't be addressed. I'm going to live with that.
So let's talk painting. The guiding principle, beyond the Marik Militia parade scheme is "rule of cool". It doesn't make sense for weapon barrels and joints to be metallic but it looks cool. The planned colors are:
Primary purple: Amethyst Purple Blue accents: Cyan Blue Red accents: Phoenix Red Weapon barrels: Honed Steel, enhanced with the Bones metallics Joints: Tarnished Steel, enhanced with the Bones metallics Hands and other rubbers: Stone Grey Base sand: Yellowed Ivory Base rim: Gem Purple
I'm still trying to decide the cockpit glass color. On the other Marik Militia minis I've painted (like the Black Knight above), I've just used Adamantium Black.
(An aside about base rims: When I paint BattleTech minis associated with a particular fashion, I paint the rim of the base a color based on the faction. Since the Marik Militia are part of the Free Worlds League Military (except for when the League doesn't exist), the base color is purple. I have a spreadsheet of faction colors I made some time ago, before the Bones paints came out. It uses some HD paints that aren't going to be rereleased, so I'll need to revisit that.)
The challenge here is to paint all four minis to tabletop, in a timely manner, and without drybrushing (except the base sand, which will be drybrushed). Let's see if I can finish this by, say, the end of July.
This is a great set of pewter miniature witches that fit well in any 28mm heroic to 32mm fantasy miniature range. The witches are done in a pin up style with plenty of personality, and are ready cast their spells and curses on the gaming table.
As soon as the campaign ends production and delivery of the miniatures will commence. The goal is to have the miniatures in your hands within a month of the campaign ending.
Picture is to show witch miniature scale comparison between two REAPER miniatures. Risks and challenges
Little risk other than small mail delivery delays from the postal services. The miniatures are ready to be cast.
The Whispering Tyrant from the second Bones kickstarter. This is an officially licensed Pathfinder miniature. So I guess it is some sort of evil adversary in some adventure or other in that game.
For me, this is Loki. I expect you see why. To make the model even more similar to the trickster god, I cut off the central helment-thing and carved the helmet round. Which took me whole tens of seconds! Bones material is really easy to cut and convert. I will miss this aspect with the Bones Black minis.
On this mini I have tried out some new colorshift paints from Green Stuff World and a flip paint (which is supposed to get the same effect) from Instar.
I probably did not do it right, as I don't think it has much of a colorshifting effect (there is a slight effect, though). The instructions say to use a gloss black undercoat and many, many thin layers to get the effect.
I did not do that. On a brown basecoat I used GSW Mystic Gold colorshift, and Instar Green Gold Flip, with GSW Tropical Green at the tips and edges. and I just glooped it on! Two or three thick coats of each paint is used here. So next time, maybe I should try actually following the instructions...
Anyhow, this model will make a good leader for my undead legions, or even a C'Tan for the Necrons.
89031 Whispering Tyrant
Reaper Miniatures, Bones 2 KS 2013
Sculpted by Bobby Jackson
40mm round lipped base
My husband and I are about to join a campaign to play through the Curse of Strahd adventure for 5e. My husband is playing as a half-orc sorcerer and I am a human fighter. We decided to go with 03879: Gon'Tarr Orc Shaman and 14604: Joeliyn Sister of the Blade as our respective PC minis. They will be the third and fourth minis I have ever painted, the other two being from one of the Learn to Paint kits.
My mini hasn't arrived yet but my husband's has so I've made a little progress on him. I cleaned him up, glued to a square base, used some green stuff to smooth out his integrated base, primed him, and put some of the base coat colors down. I've used all Reaper paints so far - their white primer along with Leather Brown for the leather bits, Harvest Brown for the wood, and a hobbled together mix of Camouflage Green, Military Green, and Warrior Flesh for the skin.
I plan on doing a base coat of all the colors first to make sure we are both happy with the choices before moving onto washes and highlighting. My shipment with my mini along with some bone colored paints that I need for Gon'Tarr's skull accessories should be here tomorrow!
Who's Online 11 Members, 1 Anonymous, 101 Guests (See full list)