Recently Browsing 0 members
No registered users viewing this page.
So after too many years of painting with my bottles just in boxes or standing around on my shelf of shame or in various drawers, I have finally at much cost of labor made paint organizers! BEHOLD! I made these to hold up to 204 Reaper dropper sized bottles (Army Painter and Vallejo fit too). They aren't the only ones I use by any means, but they're the bulk of my paint collection.
Wasn't the hardest thing in the world, but honestly I might try another method if I do this again. Right now the units are loose, probably going to lean them on the wall--eventually I would put supports on the backs so they can stand up at an angle (think picture frames). The insane super duper bonus feature is that I can put the two together and transport, or more importantly, SHAKE all my paints at once! The main purpose was organization though and being able to see each of my paints and, when I've organized and sorted them, see the spectrum at a glance rather than digging through a drawer as I have been doing. For the chromophiles out there I'll post pics when they're sorted and in their proper places.
To make them, I sized the bottles and figured out the hole size and spacing (bottles are about 1" diameter, I used a 1 1/8" hole saw (paddle bit blew out the back side) and drilled 102 holes (sandwiched the 3/4" boards together). It took hours as my drills' batteries kept dying and the saw lost its good edge by the 60th holes or so. I used the "holes" I drilled out as supports (had to chisel the middle supports in half) between the silver parts and the 5mm (yes, civilized world, in the US we know how to use proper/metric, and certain sizes of wood are specified in metric!) plywood base (black, not really visible). I carefully glued and screwed these together. Decided to use up some spray paint I had lying around. Enjoy and be inspired!
This one was for a facebook competition about color. The rules were, basically, don't worry about anything else but color. Do something different with color. I started with the idea of a dress palette of blue, teal, purple, and magenta. Once I had those colors in place, it was a matter of incorporating them in different areas of the model. I went with cotton candy roses and a galaxy print on the wings. The galaxy was a matter of stippling the dress colors (plus a bit of white) back and forth until the effect was convincing. Then I masked the body of the model and flicked a stiff brush at the wings to make star patterns. I then went back to the dress colors and stippling to blend them in a bit. This was a blast to paint, because I've never really done anything like this before.
Hi all, does anyone know where I could find a painting guide (PDF, video, anything really) to help me out with the Brother Lazarus Plague Doctor mini from the Dungeon Dwellers? Thanks in advance!
Yes, a 2020 ReaperCon WIP! And a massive undertaking at that. I'm trying very hard not to nerd out and put this whole project into, er, Project. There's just so many pieces to keep track of, that maybe I'll just use this first post to keep track of things.
Some background stuff, starting with a quote from the "Paint a giant robot! Group WIP" where I wrote some of what's planned:
You can read the rest of that post here: Paint a giant robot post and a second one to see where I'm going with this: PLA print post in same topic
Biggest takeaway is that, while useful, my PLA printer can only do so much. I have a resin printer backed on Kickstarter, but considering it's now 3 years late, I don't think I should hold my breath on it ever showing up. Especially when I can get a new Elegoo Mars resin printer with more capability for relatively cheap (<$300). The PLA machine was bought with both hobby and household goals in mind, and it's served well. But the resolution just ain't there! More on that down the posts.
I also had the chance to gain some experience on paper plants at ReaperCon (Main post for that in the Terrain section post here: Vellum Paper Plants - Alien Jungle (WIP)
Basically, I have the scrap booking machine to make my own alien plants:
Which now leads me to this WIP. This is going to tie all those pieces together. The robot WIP will still be to get a good camo scheme, but that print job is not going to be used for the final diorama. Instead, that will be the resin printer's job. So, let's break down the WIP work that I can see so far, and will be edited later to add things and mark completions.
Tasks to be completed:
Wight (being pulled down backwards, caught by hidden lines) Gremlin Unit 01 (stole a supply crate and ran; actually just bait to get the larger CAV to follow) Gremlin Units 02 and 03 (trip line pair, successfully snagging Wight across the chest) Gremlin Units 04 and 05 (trip line pair, successful across another part of the chest) Gremlin Unit 06 (burner unit, cut Wight's left gun in two) Gremlin Units 07 and 08 (trap door unit, hiding entrance to jungle path with camo doors strapped to them) Gremlin Units 09 and 10 (trip line pair, successful across right thigh) Gremlin Units 11 and 12 (trip line pair, broken cable across chest, possibly falling over from sudden jolt) Gremlin Unit 13 (ECM unit, some large radar dish looking thing) Gremlin Units 14, 15 and 16 (cargo units, loaded up with stolen supplies and headed out) Gremlin Units 17, 18, 19, and 20 (gun units) Gremlin Units 21, 22, and 23 (missile units) Gremlin Unit 24 (large gun unit) Gremlin Unit 25 and 26 (junked units; scavenged for parts?) Gremlin Unit 27 (2nd style missile unit) Gremlin Unit 28 (personnel carrier unit)
Right Leg: cut from pelvis; reposition Feet: cut off both feet and swap positions since the tread is only on one foot Base: cut away from right foot, possibly keeping full base around left foot Left arm (maybe): cut gun into two pieces, having one falling to the ground after being cut by a heat lance/chainsaw rope
Details to be included
Camo doors at front leaving marks on the dirt path, but hiding the ambush from the main trail Pieces of old broken larger CAV units around Wight gun cut in two, maybe showing inner details. May have to 3D print an add-on piece Dust being kicked up by the stolen crate (going to try using dyed cotton) IN WORK One cable snapping dynamically, with several bends and twists (superglue on thread?) Multiple vehicle tracks around camp Campfire and tents for people A latrine Other camp details (laundry, chairs, sports equipment, bored carvings, etc)
Jungle Plants (V=Vellum cuts, B=bought, S=Sculpted, F=Found, P=Printed)
Large lotus flower like plants, but dry land and maybe odd colors with a large conifer cone growing from the middle (V) Jester hat plant (balls on stems around a central point) (V) COMPLETED Spiky yucca like plant (V) Jagged leaf plant (V) Tentacle plant (V) Tripod trees (three spoke trunks) (V) Large palm fronds (S) Coral like trees (P) Horn tree (lots of horn shaped leaves from a central trunk) (P, V) Ball vine (like ivy but with odd leaf shapes) (V) Cabbage-like jungle plants with large wrinkled leaves (V) Fuzzy vines (thin wire coated with static grass) (S) Anything I can buy from N/HO scale train setups and painted alien-ish (B) Reaper figures that can be clipped and painted to be plants (B) Odd trees with strange leaf shapes (onion shaped) (V) IN WORK Random grass-like jungle plants (V) IN WORK Stem ends from mandarin oranges (seriously, pull one off and look at it, stem towards the ground) (F) Anything and everything else (VBSFP)
Base mounting system
Design and print modular tiles with bristles on top (basically, Bristle Block toys) Allows mounting of all the above jungle plants Fill in around plants with thinned plaster via a syringe to create the ground surfaces
Please use the full SKU and name of Reaper minis in the titles of your Show Off threads, per forum guidelines. You can find this information on the blister card or in the online store. I also like to give credit to the sculptor in a tag, so people can find their favorites.
We have a high volume of posts generated from this challenge, which is great! But it's also creating a lot of work for the mods. Ladystorm has already urged folks to comply with these guidelines.
As an works well, this challengehas been moved to be a bi-monthly challenge again. The longer time frame theoretically will give less stress to painting, and allow more complex jobs, and more sinister challenges.
Reaper only? - No.
If going on vacation, can I paint a mini(s) ahead to cover that time frame? - Yes.
Are speed paints acceptable - Yes.
Can it be a mini started previously? - Yes.
Based or unbased? - Yes.
Do minis for exchanges count? - Yes.
NEW RULE - Size Equivilancy
(This list is subject to change as bones 3 releases)
Medium and smaller = 1 ea
Simple Terrain (plain floors, walls) = 1ea
Complex Terrain (http://www.reapermini.com/OnlineStore/Terrain/latest/03518 or such) = 2 ea
Large (Giants and the like) = 2 ea
Huge (Most dragons, Demon Minotaur Lord, etc) = 3 ea
Bigger (Kally, Khanjirra, etc) = half of quota rounded up
Colossal ("Tianot,") = quota
Due to the variable nature of a CAV I compare them against a generic 28mm figure and the Avatar large figure. I take height and bulk into considering if it is worth 1 or 2 figures.
If it's not in this list, it counts as 1. (not yet updated for the CAV II/III figures)
If you have a question on the size, please post it here, and I'll address them individually.
Much like last year, the idea is to help those of us that normally paint VERY little or not as much as one would like, to start painting more.
You challenge begins...now!
And Our Mantra:
If your name is missing, or you believe your count is incorrect, please PM me. Please note: to make counts easier, post in the bi-monthly thread and include the tag RPChallenge
To paint 52+ minis throughout the course of the year via bi-monthly quota
(each bi-monthly thread will have the quota listed as well as the master list)
I request that when tagging your posts, please use "RPChallenge" to help with locating minis from this - I am making a more concentrated effort in 'bookkeeping' this year. If someone would be willing to assist in such, it would be much appreciated.
Darn near anything!
Shelf of shame minis from ages long forgotten!
Armies! (Though I'd encourage perhaps something outside the army as well)
Etc! (I think that covers everything)
Year long challenge
Pick a miniature of size large or greater to complete in the Jan-Feb Block. In Nov-December, purchase (if needed) that same mini and repaint in the same scheme to see direct side-by-side improvement or changes in your methods
Jan/Feb: 8: https://forum.reapermini.com/index.php?/topic/89751-janfeb-rpchallenge/
Who's Online 22 Members, 0 Anonymous, 36 Guests (See full list)