Recently Browsing 0 members
No registered users viewing this page.
or as those Texans keep spelling it, "Griffon". (Texans are lovely people, I wouldn't dream of antagonizing them over their simpleton spelling. These folks have guns. I mean, not even the more common "Griffin"...)
I went with the African Bateleur Eagle, as it has a striking black, white and red colouration with large creamy panels on the top of the wings. The back bit is just a generic big cat, with reddish brown hairy bits to balance all the red on the front.
This model is made in regular 3rd generation Bones plastic. Which in spite of being much more rigid than earlier Bonesium, is not nearly strong enough to hold any weight in awkward positions over time. If one of its front talons had been sculpted touching the base in some way, this would probably not have been a problem. As it was the talon was involuntarily touching the rim of the base anyway together with the wingtip dragging along the ground. This was discovered and fixed some time ago, and I forgot to take any pictures of the listin' gryphon.
Anyway, since it drooped quite a bit after just standing around on the shelf, it was nessecary to brace it. I did this by drilling up into the leg and inserting a 1mm diameter metal rod (I used a part of a paperclip for this) to make it stand up properly and discourage further drooping. The pin goes up into the hip or so from beneath the base. This fix has now held in the several months since I fixed it.
A long time being exposed to the enormous monsters from Warhammer has skewed my size perception. For some reason I have been thinking about this gryphon as "the small one".
Drybrushed from a black undercoat. Yeah, it is a bit rough in places, but perfectly serviceable.
#82 The "Griffon"
Bones 4 Core set, 2019
Made in Bonesium PVC
should be available from reapermini.com some time in the future in Bones.
I planned to go for the coloring suggestion on the box, except with brighter feathers. After base coat and a wash it seemed to turn rather plain. I keep the underside this way, while for the top side of the wings I started adding some variation to the feathers, gradually daring to add more detail and contrast. Took a while to get there, but in the end I was happy and called it finished. I even took a fun picture with it:
But now that I'm a few minis wiser, I demoted him from finished to lacking base. And this is where I am stuck now.
I had this plan of making a sandstone cliff looking base. I positioned him and started building up terrain, working carefully not to damage the finished mini. I colored some stones of various sizes in a few colors so I don't need to paint as much around the mini and I started to glue my rocks carefully around the base.
I kept working on it for hours thinking I am getting somewhere, but once I took a break and looked at it again from all sides... I stand by my rocks, I think in a few steps they'll look great, but the scene makes no sense. These are not cliffs, more like a stone quarry, what would a griffon be doing there? - that's too specific and unlikely.
Time to "delete" this somehow and start over... Wish me luck!
As I continue to learn airbrushing, I've been experimenting with some larger minis.
This Bones Griffin was one of the minis I sent in the Summer Mini Exchange. Everything except for the eyes, beak, and claws used the airbrush. Even the wash was sprayed on using the airbrush which took a couple of tries to get he mix right.
I've had this metal Huge Spider sitting around for many years so I finally decided to give it a go. In hindsight, I wish I would have painted the parts first then put it together. I only used a traditional brush on the eyes.
Lastly is Cadirith the Demonic Colossal Spider. And this ting is truly Colossal. It's base is about the same size as a CD (remember those).
Again, I really wish I would have painted it before I put it together. Airbrishing around the legs all assembled was a nightmare and I think I would have done more striping if it was pre-assembled. I used a traditional brush on the eyes, bones, and spikes.
Who's Online 22 Members, 0 Anonymous, 35 Guests (See full list)