Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By WhiteWulfe
      Every now and then I've seen people start up a WIP thread that's more or less along the lines of "clean the shelf of (blank)".  For me, it's of hopes and dreams, of projects started, but not quite realized, finished, or...  Even painted.  This isn't necessarily going to be one of those more serious minivember, one mini a day, or even a burn towards the finish line to actually "complete" the one a week RPChallenge, uh, challenge.  That and while I'd love to do minivember or even 99 minis in 99 days both of those seem a tad too... Intense for me.  Especially with how often I get distracted from such with playing computer games, longer days at work, or even starting to have a social life!  (Yeah, some of the Infinity gamers in town are starting to slowly coax me into coming out to play and do things, it's kind of nice!)
       
      To meet my own goal this year of beating 2018's count, I'd need another "14 points".  Coincidentally, that's fairly close to the mark of 18 for October through December, so I figure why not!  ...I guess I am going for the RPChallenge bit after all, but I'm going to give a whirl at a full twenty, because I like that number more than 14 or 18! 
       
      In short, my goal is to try and clear some of the assembled and primed backlog I have, and focus on mainly getting those painted up and FINISHED.  Naturally I'm not going to lock out the prospect of adding in a few more minis to the table (I am more than likely going to be building up a tournament HaqqIslam force for February 2020, which will require more units to be acquired, assembled, and painted), but as for some of the things that come to mind for being taken care of...
      Getting Wyrmgear's mods sculpted - I really would like to see him at least standing up at the end of the year Additional work on my Rainbow Dragon Challenge Ebonwrath - he's taking up a decent amount of space on my desk, plus, hey, DRAGON! Infinity Red Veil, and Beyond Red Veil boxed set - at least the HaqqIslam portion, anyways, although I'd like to at least get the Yu Jing assembled and based too Various CAVs in various states Other, smaller dragons! (Pathfinder Red Dragon, Temple Dragon, and I think I have a Narthrax hiding around somewhere too) minotaurs, gnolls, and some Skaven character/heroes A few minis that have become "paint catchers" for when I mix up too much  
      There's probably more, but still.  I'm not going to keep a full on tally of things, but either way, I'm hoping to work on, and finish, at least 14 "points" worth of minis, but 18 "points" would be awesome... Or even more.  Apparently, as of this post, there are ten weeks and four days until the end of 2019.
       
      What am I mostly aiming for by doing this thread?  Well, by having a WIP I'm regularly updating, I'm hoping to not only get more work done close to every day on miniatures (even if it's just twenty minutes), but also get back into the habit of sitting down and hobbying every day.  I really do like how relaxed I am when doing it, and it helps me cool and calm down too.  That and, oh yeah, I already mentioned the habit thing.
       
      Anyways, I did mention something else in the beginning of all of this about something silly, well...  Let's put it this way....

      ^I was okay with some of them trying to teach others how to "roll over" and "play dead", even if it meant my Switch is a little harder to get to....
      I was even okay with some of them guarding one of my spare graphics cards, and the Mission Models iridescent and pearl paints...

      ^Yup, even didn't really mind them taking over a shelf in my cube shelf (there are more minis hiding in the ice cream pail, they're in there due to having been washed) - Actually, this helped kickstart me being able to paint again, since ALL of those were on my desk before tidying up...
       
      But once you try and hold my benching rig hostage....  Or you try to do dark rituals around my turntables...  Oh no, this needs to be stopped.  if I let them continuing running amok, they'll try and take over the entire living room!  (there were additional pics, but it kind of felt like things were dragging on).
       

      ^So...  Here's how my desk looked last time I tidied it up.  It looks a little different, and somewhat messier now, but that's because I have a few projects on the go that I was working on before this post.  Not all of the minis in that picture are mine (the Pathfinder Red Dragon belongs to hubby, for example) but still.  There's a decent amount of stuff on the table, to say the least.
       

      ^So here's where I left off two days ago - I apparently didn't take a picture of yesterday's table, but there were two more Haqq minis done, and I suspect that's also simply because we played Division 2 for like two hours yesterday, then I worked on minis, then I went to bed rather tired...
       

      ^And how things are looking so far today.  All seven minis from the Operation: Red Veil started set are now assembled (although they'll be an eighth one added in eventually due to having been sent a double by accident - Corvus was quick and prompt when replying on their mispack line... Err, email), and bases for the three miniatures from Beyond Operation: Red Veil are drying, so they'll be assembled tomorrow.  The reason why the seventh guy doesn't have anything extra on his base yet is quite simply because I'd assembled him tonight.  I'm not quite sure what kind of colours I'll be going with on my Haqq, but I strongly suspect they won't really be all that traditional, or at least studio paint jobs.  Totally lost on what colours I'll be going with for the Oathsworn Minotaur as well, but I'll worry about that when I get to that front - today's focus was assembly and basing.
    • By planetmut
      It took me ages to choose a colour scheme for the Valkeeri Leader. I eventually decided on Army Painter Shining Silver to go with the whole pulp scifi theme, and VGC Warlock Purple because why not. I was worried the silver bits of her uniform would look like armour instead of metallic cloth but I think it's turned out OK. For once I managed to get her eyes to a decent standard and her hair came out looking good too. Her gun is VMC Brass, toned down with VGC Sepia Wash and Liquitex matte varnish. Her lips are a tiny dab of VMC Brown Rose.
       
      I forgot about her cape until I was finished with her, so it got a few thin coats of Warlock Purple and then began the fun and games of gluing it to the figure. Four attempts later I got it in what I hope is the right position and touched up the purple.
       

       

       

    • By ryc03
      Haven't post anything here for so long...
       
      I'm not really following any color scheme here, since I am not familiar with the lore of CAV at all (I'm more interested in the game).
       
      Also I wish I learnt a bit more about painting technique for glowing effect before painting the windows...
       
       
       
       
        
       
       
       

       

       

       

       

       
       
    • By Dan d'Lyon
      Can't believe I missed this one until now.  I didn't have a printer during their previous projects, but I'm definitely in on this one.  Less than 48 hours to go.  Link added.
       
      https://www.kickstarter.com/projects/2nddynasty/starship-iii-fully-3d-printable-28mm-spaceships?ref=user_menu
       
      Seek adventure amongst the stars! Explore strange new worlds, smuggle illicit cargos across the hyperspace lanes or launch a space to ground assault, in your Scout Ship, Transport, or Space Shuttle!
      Somewhere in the outer reaches... Starship III introduces three original, fully 3D-printable spaceships scaled for 28mm play in your favourite Tabletop RPGs or Wargames. Complete with OpenLOCK-compatible modular interiors, the ships are detailed inside and out and a variety of configurations can be used to customise the deck plans.
      Each ship comes detailed inside and out (Scout ship standard interior shown here) As the campaign unfolds, new starship hull variants and modules will be unlocked as stretch goals to bring even more variety to your game and increase the pledge value for everyone.
      Each pledge is designed to be printed on your own 3D printer or via a print service, allowing you to print as many parts as you like, for non-commercial use. Deliverable files will be made available digitally in STL zip packs via DriveThruRPG.com (see Printing Requirements details below for print bed size requirements)
      Hangar 01: Space Shuttle Alpha Need a way to get your units from the ground to orbit? This space shuttle is fully modular and can be configured as a dropship, cargo shuttle, or even a small starship. The stock standard aerodynamic fuselage comes complete with manoeuvring thrusters, sensors, landing gear and articulated main thrusters for VTOL operations.
      The standard layout below is included in any pledges that include the shuttle Modular standard deck plan of shuttle interior. Hangar 02: Scout Ship Beta Explore deep space and final frontiers with this full 28mm scale scout ship, designed stock-standard for long haul endurance scout missions. Includes two manned turrets for defending in rough territory, a full sensor suite package for scanning new systems, a well equipped engineering section, cargo hold, living quarters and a 5-station forward bridge.
      These are the unique parts that compose the scout ship interior, which come as a part of any scout ship pledge Closeup of the Engineering Standard Deck Plan for the Scout Ship Beta Hangar 03: Transport Delta Cruise the hyperspace lanes in this high-speed transport. Haul cargo - legal or illicit - with two massive engines to get you from point A to point B. Manoeuvre with the fluidity of repulsor technology and defend yourself with manned or unmanned turrets and a powerful shield generator.
         
    • By Jasper_the_2nd
      Just noticed this KS was posted here. Only 53 hours left....

      https://www.kickstarter.com/projects/wowbuildings/wowbuildings-further-space-adventures-3d-print-stl/description
       
      Here we are folks, WOWBuildings is expanding further into space, with the infrastructure now for several types of scenarios, this KS will be a mix of vehicles and Buildings so you will have an even bigger range of choices for your tabletops. all will come in STL format and cuts will be made where needed so boot up those 3D printers once again and jump on board for what hopefully will be a great sack full of goodies to enjoy.
      I am adding a couple of special adds that are for personal print use only as a little treat for you top end backers, all files will be initially 28mm scaled (but slightly over scaled to allow for GW sized figures) and optimized for 15-32mm scales so hopefully something for all.
      Again human based faction designs for this KS with other races in the pipeline if all goes well, so hello again and as usual keep the feedback coming and if you want anything specific added then just ask, if it can be done it will be so
      Stretch Goals as you see will start at £1000, and £500, but this time i am toying with adding some £250 jump points too here and there to add to the fun.
      I have tried to keep the pledge level prices as low as i can as well including the licence which is an absolute bargain price for this KS as a thank you for continued support and to help with those after Xmas blues.
      £10 Road Builder
      £30 Asteroid Miner
      £40 Planet Settler
  • Who's Online   19 Members, 2 Anonymous, 33 Guests (See full list)

×
×
  • Create New...