Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Inarah
      Coming in March.
       
      "3D printable STL files for RPG / wargaming - support-free minis, terrain, and vehicles for your Scifi and Cyberpunk game tables."
       

       

       
       
       
      https://www.kickstarter.com/projects/ecaroth/the-ignis-quadrant-3d-printable-tabletop-models?fbclid=IwAR1Qe9ssykZnV46G-nOv7it4jq_Flry7L4Fufx8_wFOl_-AkRt8Poj8eesQ
       





       
       
    • By Thrym
      Wire Tree
      Scratch Built
       
      The Twist
       
      One Friday evening as we played Batman: Talisman I twisted a tree to life.  Formed from 13 strands of wire of approximately 12-inches in length, the tree takes shape by folding them in half and twisting the loop created into the trunk of the tree.  The loop created is cut into the roots and the longer tendrils are twisted into limbs and branches to form the crown of the tree.
       

       
      As you can see in the picture, I used one of my Armstrong sample tiles to make a base for the roots and glued it in place with some Loctite Gel Glue.  The idea is to form irregular surfaces to cover and create the illusion of a real trunk, roots and limbs.  The crown will kind of solve itself when the canopy is applied later.
       
      The Ground and Bark
       
      Once you have a "skeleton" for the tree, it's time to add the skin.  To do this there are a number of ways.  You can use liquid latex.  You can apply green putty or green stuff.  I chose to do the super glue and baking soda method.  You've probably seen my work with this insta-cure method before on Frulla Krung and other Frost Giants.
       
      I use super thin, insta-cure cyanoacrylate (super glue) that allows it to run well over the wires and base and then coat that with the baking soda. The squeeze bottle, shown in the background, allows me to apply it as a wind blown sediment or just to dust it over the glue. The opposite can be done where you make a pile of baking soda or fill the crevice you want covered and apply the super glue carefully so you don't get an impact crater.  Of course, maybe you want impact craters.
       

       
      As you can see above, the effect is quite "chilling."  Be careful of fumes.  It's still super glue.  And super-thin super glue runs everywhere so I suggest putting down something you don't care about.  I use box lids.
       
      The Crown
       
      Once you have the coating applied to your liking, it's time to finalize the branches and make the crown.  Here's where random is your friend.  Twist the strands into limbs and then twist off the limbs into branches.  You can create burls and broken limb ends by adding sharp turns with your pliers.  In this case, I left the crown relatively open.  It's a small, young tree after all.
       
      You can see another much older tree in the works behind it below.
       

       
      Our specimen is primed as well.  I added curlicues at the ends of the branches to eat some excess wire and for extra hook points for the canopy. 
       
      The Canopy
       
      The next step after this is to paint the trunk.  I used a pair of FolkArt Pickling Washes to achieve this.  The first was a dark gray, FolkArt Stormy Sky.  To add body to the paint in order to help fill some of the wire gaps, I mixed in some Liquitex Matte Medium.  Once the basecoat was applied.  I drybrushed the trunk, roots and limbs with FolkArt Cottage White Pickling Wash mixed with some of the Stormy Sky mixture.  This gave me a nice light ashen color to the bark.
       

       
      The canopy is made from Woodland Scenics Tree Canopy Green and Yellow mixed with essentially some static grass I got off of Wish.  I mixed them into my Hamilton Beech Grinder and ground them down further.  You'll prolly have noted that there are some wires visibly still.  This has been noted.  I ran out of mixed canopy.  I will be making another batch shortly to finish it.  I used a spritz bottle of glue from Dollar Tree to apply the canopy.  It worked really well.  Once it was set, I used my favorite finish coat to solidify the canopy, Testors Dullcote. 
       
      What's Left
       
      That's where it's at as of now.  As to next, I will be doing a wash of the canopy to add shading to the tree.  That will carry down the trunk and roots.  Then I will apply an umber paint to the ground and a mixture of cork and bark, ground down in my grinder, over that.
       
      Stay tuned, Stay Well and Enjoy
    • By Rahz
      So with the big confrontation coming for my group this Friday, I’ve been busily prepping some terrain to go along with the portal I posted up last week.  
       

      some crystal formations (wish I had hollowed them).  Done with mostly clear resin, though there was a little red left in the tank.  
      Based. Used green painters tape to fill the gap in the bases.  I may regret this...
       

      Bases have been prepped with some Vallejo texture paste.  You may notice a large surprise for my guys who is going to interrupt their encounter with the Drow.  His wings are printing right now.  
       
      Thanks for looking. 
    • By Jasper_the_2nd
      Story
      Who knows what the future holds whether it be a nuclear war or the planets dying climate times are going to change so get stuck in while you can to the near future and beyond with some unique terrain and scenery setups from steampunk styles western towns to container towns and military buildings, along with a selection of vehicles.
      we are going back for this KS to stretch goals as it makes it easier for me to keep you updated with the goings-on, but rest assured you will AGAIN be getting plenty of value for your dollars/pounds, I have kept this one very affordable.
      I will be asking for your input for the stretch goals so we can adapt this KS to suit you the gamer's needs as we go so list your thoughts and ideas in the comments and maybe I can make them appear here.
      so let's see what you are fetting and remember this is just the starter stuff more will be added as we go
      here is the link to the past apocalypse KS that you get full access to if you back that level
      https://www.kickstarter.com/projects/wowbuildings/apocalypse-wow
      Ok, so what do you get?
       all of the following is included in the basic £40 backing
      CONTAINER TOWN
      10 building set is made from 3 types of shipping containers and vehicle shells
      STEAMPUNK STYLE WILD WESTERN TOWN
      8 building set, a mix of wooden wild west buildings and metal plating
      3 VEHICLE SET
      cars from the now adapted for the future
        CURVED HABITATS
      2 building set
      MILITARY OUTPOST BUILDING SET
      £1000 STRETCH GOAL
      DRILL RIG
      £1500 STRETCH GOAL
      EXCAVATOR
      £2000 STRETCH GOAL
      PUNK TRAIN (wip)
      £2500 STRETCH GOAL
      VEHICLE SET 2 (wip)
      these two shells will make the two additional vehicles
      this one will be a police car of some kind
      big engine and exhausts for this one
      £3000 STRETCH GOAL
      BUILD YOUR OWN
      £3500 STRETCH GOAL
      £4000 STRETCH GOAL
      £4500 STRETCH GOAL
      TBA
      the container town files in all kit form, build you own setups add the detail you want where you want it
      £5000 STRETCH GOAL
      BIG TRUCK VEHICLE
    • By knarthex
      So at Reapercon 2018, I scored the Duskwarden poster of Thregan Helmsplitter for my work at the auction, and of course, being the Duskwarden*, I have a couple of the minis as well.
         
       
      So I was thinking of using him as my next PC, but as I have hair, I wanted my mini to also...
      While working on another project with GS, as usual, I made to much, and decided to bite the bullet and do his hair...
      What do you think?




      Comments appreciated!
       
      George
       
      *
      Doesn't Jacob Knochengard look like me???
  • Who's Online   21 Members, 4 Anonymous, 27 Guests (See full list)

×
×
  • Create New...