Jump to content

Sign in to follow this  
scipio.au

D&D Castle Ravenloft - Blazing Skeletons & Wraiths

Recommended Posts

More Dungeons and Dragons Boardgame models today. The Wraiths and Blazing Skeletons. Both of these sculpts come in transparent blue plastic, so painting them is a little different.

 

IMG_3229_zpsvw2iobxx.jpg

You really don't want to be undercoating these if you want to retain the semi-transparent look. I gave both of them a bit of a wash with dark blue ink in order to deepen the shadows, which has worked in one way and not been so great in another, as they have lost a certain amount of their transparency by doing so. The Blazing Skeletons are pretty nice models, actually - the only really "difficult" part being how the fireball is indistinct from the rest of the flames happening on the model.

 

IMG_3231_zpse2lvxjry.jpg

The Wraiths aren't bad models either. A little ham-handed perhaps, but that's hardly a new thing to miniatures. Simple enough, but overall quite effective.

 

IMG_3232_zpscauxleyd.jpg

Obviously, the place for these figures to get more use would be in the Undead Army. What to use them for on the other hand is a little trickier. The wraiths would obviously see most approrriate use as Wraiths, but that role is more than competently taken care of both by the reams of Army of the Dead models from LotR as well as the old Citadel Spirit Host (Ghost Swarm) models that I repainted last year. Smaller numbers have any number of very nice models in LotR Barrow-Wights, Otherworld Miniatures' Wights and the like. Perhaps if the AotD get split off into a separate Army of the Necromancer or something. I dunno. Suggestions on near-term use for those models would always be welcome.

 

The Blazing Skeletons have a similar problem - what to use them for? If I were really lazy or creative, I could try suggesting that they're stand-ins for War Machines. What with the huge blue fireballs they're about to Ha-dou-ken at their enemies. Thing is of course, that I already have some Undead Warmachines (and two more Skull Chuckers to sort out, and a TK Screaming Skull on the radar.)

 

So, I dunno. Smush them in with Undead Archers since they're all ranged? Seems a bit ill-fitting somehow. Use them as Undead Characters/casters? While that could work ont he surface, these models don't look like interesting characters, and Undead Characters seems to be one of the most heavily-populated subgenres of miniatures available - both from older metal collections like my Citadel stuff as well as endless newer models from Reaper, Bones, etc.

  • Like 19

Share this post


Link to post
Share on other sites

Wraiths: hitch-hiking ghosts. Or stock market floor guys.  :rolleyes:

 

We call our blazing skeleton Ha-dou-ken Guy, so I have no suggestions for you there  :rock:

  • Like 1

Share this post


Link to post
Share on other sites

Looking good.

 

I would just mix them up in a regiment of any Undead,, sort of like a unit filler to give some flavour to the unit.

So a unit with 20 skeletons could have some of these among them, Just counting as other skeletons.

  • Like 1

Share this post


Link to post
Share on other sites

Nice job on them!

Who makes the well dressed tattooed fellow in the middle; I don't recognize him?

  • Like 1

Share this post


Link to post
Share on other sites

Nice job on them!

Who makes the well dressed tattooed fellow in the middle; I don't recognize him?

 

Looks like a Celtos mini to me.

  • Like 1

Share this post


Link to post
Share on other sites

Good job.

 

For my Wraiths, I used dullcoat as a primer to keep the transparent affect and give my paints and washes something to grip. After doing my paint job I hit with a few layers of dullcoat. Seem to be holding up well. I do baby them more then other miniatures however. 

 

I love the bases. 

Edited by Chargeit

Share this post


Link to post
Share on other sites

I was trying to figure out why these looked so familiar and then I remembered a friend of mine owns that game too.  Nice job painting them.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Thrym
      Hellborn Troll
      from WizKids' Nolzur's Marvelous Miniatures
       
      I stopped at AC Moore today and picked up one of the FolkArt Pickling Washes I didn't have while my wife was shopping for school play costume materials.  Nearby I found FolkArt Ultra Dyes and picked up two colors to check out; Purple Rain and Pucker Up (a yellow).
       

       
      I have enjoyed using the Glass Enamels with the long cure time before and thought these might work similarly.   I decided to wash my troll with the Purple Rain to see how it comes out and goes on.
       

       
      It's fairly thick out of the bottle but I might not have shaken it enough.  It was taking forever to dry so I hit it with some Testors Dullcote to speed the process and reduce the shine.  It's glossy like inks.
       
      Next, I used Reaper Blood Red to give him the Hellborn look I wanted.
       

       
      Then I pulled out Reaper Violet Shadow to get his hair, teeth and claws darkened.
       

       
      I then went back over the boney bits with the FolkArt Ultra Dye.  It'll put the glossy touch to the claws and teeth.
       
      I am quite happy with him so far.  
       
      Stay tuned and Enjoy!
    • By vutpakdi
      Traveling Encounters volume 1
      Compelling 5th Edition Challenges For CR1 to CR5
       
      This small project is to fund a collection of little encounters that can be dropped into an existing adventure for low level adventurers.  I backed his previous project for alternate character backgrounds, and he delivered the PDFs early.
       

       

       
    • By Lidless Eye
      Here's some shots from the penultimate session of our D&D game.
       
      The party finally confronts the Sewn Sisters.
      The tiles are from "Dwarven Forge" and "Secret Weapon".  The tables, chairs, and most props are from "Mantic:Terrain Crate", with the cauldron being from an Old Glory Crones set.  
      The Scarecrow & Leomon (Half-Elf Paladin) are from "Reaper Bones".
      The rest of the party are 3D prints, from HeroForge, Desktop Hero, and Miguel Zavala.
      The Sewn Sisters are 3D prints from DarkRealms.
      Everything was hand painted by myself.
       


       
      Cradle of the Death God.
      The tiles are Dwarven Forge.
      The party are 3D prints, with designs from Hero Forge, Desktop Hero, and Miguel Zavala. (One is a Reaper Bones piece)
      The Soulmonger is a 3D print designed by Miguel Zavala.  The God That Never Was is a 3D design by Duncan "Shadow" Louca.
      Everything was painted by myself.  I also added LEDs.
       

       
       
       
    • By PandorasGhost
      Hey everybody!
       
      Tried to get the word out by word of mouth, and decided on here might be a good way to go about it as well. The tables for gaming had to be altered from what was on the printed schedule due to some logistics issues. (Logic?! At a con?! Say it isn't so.)
       
      Games on GrowTix should reflect accurate locations (and hopefully always reflected accurate times). Also, there are printed schedules available on the table just beside registration. ALSO, ALSO, I attached the Xcel spreadsheet of the schedule if anyone wants to peruse.
       
      Joseph Wolf's Dreadmere games are still at Table 1 - under the big Dredmere banner. Tables 2 ,3, and 10 are various Roleplaying games, as per the schedule Table 4 is an all-day, every-day Freeblades demo - drop by and check it out! Tables 6 thru 9 are for Gamers looking for Pathfinder/Starfinder D&D Adventure League is now tables 11 thru 23, but Gamers taking part in DDAL are encouraged to head to Table 18, where Colby (and crew) will be marshaling GMs, getting players into games, and generally just controlling the madness of League events. Tables 24 thru 28 are going to host Frog God Games (in the Arabian rooms) ReaperCon 2019 Gaming.xlsx
    • By Jasper_the_2nd
      We're starting a new 5th Ed D&D campaign in a couple weeks.  I decided I might play a rogue, so I wandered down to the LFGS at lunch and looked at what was there (because I obviously have NO miniatures already I could use).
      Spotted the Tabaxi Rogue female pack from WizKids (I like the sculpts and poses of the female figs more than the male ones) so that's going to be my next character.

      Cool fig, primer isn't too bad.  Some nasty mold lines but I only have a week to paint this so I'm not messing with them.  Maybe after I'll clean up the "advanced" version and do a better job on her.
       
      And after some time fiddling with colours.

       
      Well, that looks a mess.  Just figuring out colours.
      Skin base is MSP Alien Flesh.  Cloth is MSPB Succubus Kiss. Had AV Model Air Black handy so used that to start base coating metals.  And leather is MSP Leather Brown.  Still not sure on the leather but I'll give it some time to think about it and maybe try a wash on it.
       
  • Who's Online   11 Members, 1 Anonymous, 213 Guests (See full list)

×