Jump to content
Sign in to follow this  
Arc 724

60101: Kiramor the Forest Shadow

Recommended Posts

60101: Kiramor the Forest Shadow

Sculpted by Bobby Jackson

 

post-13341-0-02633000-1432240106_thumb.jpg

  • Secondary priming on the skin with Linen White: 09061. Added 3 drops of Flow Improver.
  • Then used a Vallejo Elf Skin, 2;1 Flow Improver. In several layers until it was right.
  • Lastly, washed in Flesh Wash: 09253. This was first done broadly, then after it dried I would reapply to lower sections of the muscles.
    • ​I still need to darken and go over with a lightened Elf Skin on the raised areas. Then re-blend. 

 

Going to work on the eyes next, Mocha has inspired me to attempt the eyes she just did on Noreth Skyblade.

  • Like 7

Share this post


Link to post
Share on other sites

I agree with ub3r! Excited to see what you do with the eyes-- working around his head dress will be a challenge, but you can do it ^_^

  • Like 2

Share this post


Link to post
Share on other sites

Off to a really good start here, keep it going!

 

I agree with ub3r! Excited to see what you do with the eyes-- working around his head dress will be a challenge, but you can do it ^_^

 

Thanks ya'll. The eyes are super small but he almost looks like he is squinting. So i am going to try and take the long-eye approach. Time to break out my super magnifier and some whiskey!

  • Like 4

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Maledrakh
      What is a faux-prehistoric setting without Cavemen? The stereotypical fur-clad, monosyllabic unwashed barbarian that whacks a woman over the head with a club and then drags her by the hair into a cave?
      Or at least, sporting the "cave man" look that was popularised in The Flintstones and The Far Side.
      The reason these types are prehistoric lies in the name. Pre-history, as in "before recorded time". Which really is most of time.
      We don't really know all that much about prehistoric man other than what can be gleaned through archeology. We do know that there existed several different sub-species of humans concurrently up to about 50.000 years ago. Neanderthals would be one such sub-species, the Hobbits (Homo Florensis) another.
      Then we (or something) killed off all the others. Some evidence of interspecies breeding is still to be found in our modern DNA.
       
       
      #628-631 These were only shown as silhouettes in the KS.

      From left to right: Shaman. clubber, spearman, archer.
      These are technologically advanced cavemen, as shown by their use of the bow.
       

      The Shaman. I call him Barney. He succeeded in the Quest for Fire.
       

      The clubber, Thag Simmons. He will be known to posterity by the manner of his demise. (Should have stayed clear of the tail end of that Stegosaur.)
       
       

      Fred, the spearman. Used stones of flint to make a sharp spearhead.
       

      Archie the bowman. His right hand strategically placed to hide his embarrassing lack of arrows from the others.
       
      These were simple and fun to do in regular paints on a black undercoat.
       

      I come in search of the answer to the Riddle of Steel! What do you know about it?
       
      These minis were finished June 14th 2020.
       
      44086 Black Bear Tribe Cavemen (4)
      Bones 4 kickstarter, delivered 2019
      Reaper Miniatures
      Sculpted by Bobby Jackson
      Made in Bones Black PVC
      available from reapermini.com
    • By Lostraven
      Here is another wizard from the Greybeards subset of the Bones 4 Core set. This one does have a metal version (SKU 03953) and was sculpted by Bobby Jackson. I had fun with this figure. I love the character in these wizard figures. This one is strongly reminiscent of Gandalf. Though I resisted the temptation to go grey I did sneak Gandalf's rune onto the medallion on the back of his hat.
       





    • By Lostraven
      I started working on the wizards from the Bone 4 core set. I was originally running through the usual themes - brown, grey, red etc. but this colour scheme on a different figure really caught my eye and I thought it would work on this figure. I didn't realize he was supposed to be an evil wizard until I looked it up on line (sku 03847 by Bobby Jackson btw). But hey evil wizards can like bright colours too, right?
       
       





    • By silentoutsidr
      Hi Everyone,

      This is my first time sharing my miniatures step by step, and excited to do so. Hopefully I can learn some things and everyone else who views the thread will learn a bit too.
      I have been looking forward to the Starcadia board game and especially painting the minis that come with it. So first up is the Weeble alien monster. I picked it for 2 reasons, 1 because it was a simple model and I wanted to try my hand at the big eye. There are 4 total Weeble models and it took about 4-5 hours to get to the point in the last photo. I decided to mimic the illustration that came on the Weeble card in the game, so I am using a similar color scheme.

      First step was prepping the model, and removing the mold lines. 2 of the 4 models had 2 bad areas on their left fin that left gaps and a rough spot. To fix it, I tried a new method, I put a little varnish on each area. If you haven't tried it, I definitely recommend it for small gaps or trouble areas that need filled or smoothed. I put a small dab on, let it dry and done, no need to pull out the putty.

      2nd step was priming. I don't like the spray can so I use gesso. It might take a little longer, but no noxious fumes and extra space needed, just brush it on and let it dry. I just spread it thin and quick most of the time, hence the streaking in the picture. The streaking never shows on a finished mini from what I have experienced.

      3 is where the fun began for me, choosing the colors and beginning to paint. My most recent elven minis, I started experimenting with different ways to do base coating and time around I am trying a colored base that is different that the final paint layer. I'm trying this out to see if I can reduce a step in my process and still get results I like. After examining the illustration, I settled on a blue-green for the body of the Weeble, and yellow for the eye. I plan on keeping with the warm yellow highlight in the front and the cold blue / purple shadow in the back. Once I decided that, I chose my basing colors, of a dark yellow brown for the front and dark blue purple for the back.

      4 with the base shadows on the model, I started working from dark to light. I mixed up a glaze of a medium green and medium purple blue. I gradually worked up the colors with multiple layers making sure to blend the colors together where the transition occurred between them. I left the eye alone, because the dark yellow brown was perfect for the yellow eye.

      5 once I was happy with the dark colors, I moved on to my mid-tones. I mixed up glazes of yellow green for the warm light and a blue green for the cold light. I took my time on this step again applying the glazes in layers to build up the color. I decided to try reflected / bounce lighting on the model, so I applied the blue green more on top of the model and the yellow green more on the bottom. I imagine the lighting being blue white (like a daylight bulb) which results a warmer reflected light in the areas not directly hit by the blue light.

      6 after a while I moved on to the eye. I continued with painting dark to light, so I chose an orange brown for the light area and the same yellow brown and dark blue purple for the shadowed area. Again I gradually applied the glazes and blended them together.

      Overall I am pleased with the direction it is going, and it is still far from done. I having gotten to the brightest highlights or even attempted the mouth yet. After that will be the finishing touches, the green slime, and scaly lumps. In the illustration the lumps are black but I don't think black will look good, any suggestions? I was also thinking of doing a slime trail, or more drool I've not done something like that before does anyone have any suggestions in the direction? Or should I not do a slime trail or more drool?






    • By Lostraven
      Here is Ava Justina, Female Templar from the Bones 4 core set. She is in fact figure #1 in the set. She was sculpted by Bobby Jackson and is also available in metal SKU 03746. I drew inspiration from GW's Sisters of Battle and went for a clean black armor look. Unfortunately the casting is a little soft in some areas - especially around the legs where the plates and chainmail are not so well defined. I cut her off the cast-in base and put her on one I made with the Temple roller from Green Stuff World. There are fleur-de-lis in the pattern which I thought would be a neat call back to the Battle Sisters.
       
       




  • Who's Online   20 Members, 0 Anonymous, 31 Guests (See full list)

×
×
  • Create New...